We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42/28/21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel size: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min power capacity: 3,3 kW weight of the machine ca.: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo nameplate -Dimensions: 1000/570/H760 mm -Weight: 388kg
new
Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C
new
Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C
used
Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor
used
Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request
used
Power supply approximately 3.6 kVA Inside about 200 mm x 150 mm x 300 mm Maximum temperature 1200 °C
used
hardening furnace 1200 1x1x2m (possible various sizes) t max 1200C Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Afspændingsglødnng Hiærdning og anløbning Carbonisering (indsætning) Anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Ovne og anlæg til anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Varmebehandling Preshærdning Karbonitre ...
used
Glasbeek Finish Gas Poederwand Chamber Oven 250°C Glasbeek Finish Gas Poederwand Chamber Furnace Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V YOC 2003 Approximate internal dimensions (W1200mm x D3100mm x H1400mm) with loading trolley L2800 x W1020mm Approximate external dimensions LxWxH approx. 320x240x250 cm
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW
used
Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)
used
Key data: 800 mm, 1400 , 2700
in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm) ...
used
SOLO 202 30/30/60 quenching machine built in 2001 in Switzerland, is a multifunctional machine used in the process of workpiece quenching. The quenching process improves the mechanical properties of the workpiece by increasing its strength and wear resistance. The machine’s extensive machining capabilities and high performance allow the following types of metal heat treatment to be performed: – austenitizing (in atmosphere, protective gas or nitrogen) – carburizing – carbonitriding – water quenching – tempering (without protective gas) – alkaline spray washing – annealing The SOLO quenching machine of multi-module construction is equipped with two quenching furnaces (a bell furnace and a tempering furnace), two tanks (an oil bath and a water tank) and a spray washing machine with a two-section oil separator for load washing. The furnaces, made of top-quality she ...
used
Glasbeek Finish Gas Chamber Oven G.11.01 200°C 54kW Glasbeek Finish Gas chamber furnace Maximum temperature 200°C Electrical connection 4 kW 54 KW 3x380V Approximate internal dimensions (W1900mm x D3000mm x H1880mm)
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)
used
Key data: 1280
Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.
used
General: Year of construction 1985 Nominal temperature 350° C Power 6 kW
used
1) a forging table or curing furnace or also called forging furnace of Flamefast type DS330 Ceramic Chip Forge, with hood and suction 2) a quenching bath or cleaning bath or also called hardening bath, type WO 200. Both hardly used. NP both together at about 6000€, Singles: 1100 and 1450
used
We offer 42 heat-resistant V2A charging racks including grids for hardening furnaces.
used
Inv. Num. : 6500 Type: HT Producer: BMW Created: 2015 Parameters: Maximum temperature: 850 C Internal dimensions of the machine (LxWxH): 1650x1500x1900 mm Capacity: 2000 kg Nominal current: 250 A Control voltage: 3 PEN 50Hz 230V/TN C-S 24 V DC
1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C
new
Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW
used
Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts
used
Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts
used
Key data: 250 , 1500 , 3000
New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.