We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
used
Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm
used
8 piece elements with ROeHMHELD swivel clamps, for conversions etc. further: 4 piece detto
new
New planboard Roehm 600 mm Direct recording Camlock - 8
used
diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 250 mm hollow: 75 mm weight: kg Röhm four-jaw chuck Diameter 250 mm Through hole 75 mm Mounting cone approx. 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 250 mm hollow: 75 mm weight: 30 kg Ø: 250mm Passage: 75mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thickness of jaw: 135 mm : 40 mm clamping width: 225 mm weight: 45 kg clamping capacity: 4,8 t dimensions of the machine ca.: 550 x 300 x 140 mm - with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 250 mm hollow: 75 mm weight: 40 kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø75mm - Weight: 40kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 315 mm hollow: 100 mm weight: / kg Ø 315 mm Ø passage 100 mm Height without jaws 85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 250 mm hollow: 105 mm weight: / kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø105mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 85 mm tool adaptor: SK 50 bore of diameter max.: 130 mm adjustment of the slide: 40 mm tool tapers in the slides: 20 mm weight: ca. 3 kg Wooden box with accessories: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Various guide rifles
used
Drive unit with pressure collet chuck RED BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0,55 / 0.7 kW 315 / 630 rpm 400 V 3AC Base plate: 300 x 240 x 18.5 mm hole spacing: 260 / 200 mm, hole diameter: 4xØ 13 mm / 1x Ø 18 mm groove: width: 18mm, depth: 7 mm used, tested ! Dimensions: 580 x 300 x 350 mm
used
ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A collet: ER32 Working length: 87 mm mount: HSK - A100 New ! Dimensions ( collet chuck ): 145 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 150 mm
used
ER collet chuck, collet chuck, with collet set REGO-FIX SK 50 ER11 MS with 20 collets in plastic case used, tested ! Dimensions ( collet chuck ): 275 x 97 x 97 mm Dimensions ( case ): 410 x 320 x 150 mm
used
Collet chuck with collet set GEWEFA SK 50-24 ( SK50-24 ) with collets: 12 / 14 / 16 / 20 mm in wooden box Dimensions ( collets ): 64 x 64 x 80 mm Dimensions ( collet chuck ): 215 x 100 x 100 mm Collet chuck is New !! used, checked ! Dimensions ( packaging ): 320 x 240 x 120 mm
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Take: SK40 -Tension sleeves: 28 mm -Price: complete -Number: 10x available -Weight: 15 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK4 / 32 mm -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Collet holder: SK50 -Type: SK50 D32 A71 CNB-01 -Tensioning sleeve: Ø 25 mm -Dimensions: Ø 98 x 200 mm -Weight: 3.5 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -Tensioning sleeve: Ø 31 mm -Dimension: Ø 76 x 290 mm -Weight: 5.7 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -1x clamping sleeve: Ø 25 mm -Weight: 7.5 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg