Category: 103 milling machines / CNC Universal Milling Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162248943
New in: 1993

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6905 Type: UNI 1000 Producer: Reckermann Created: 1993 Parameters: Control system: Heidenhain TNC 135 Working table length: 1500 mm Working table width: 400 mm Minimum vertical spindle speed: 40 1/min Maximum vertical spindle speed: 2000 1/min X-axis travel: 900 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle power: 7.5 kW Total power requirement: 14.5 kW Machine height: 2200 mm Machine length: 2200 mm Machine width: 2300 mm Machine weight: 3800 kg Equipment: Central lubrication Lighting Technical Documentation

Category: 103 milling machines / Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794356

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Univ. Milling machine make RECKERMANN type Kombi 1000Year of construction 1974Transverse movement of the table: 340 mmVertical movement of the table: 400 mmTable size: 1000 x 400 mmwith 5 T-slots to DIN, width: 18 mmDistance: 70 mmLongitudinal path: 700 mmDistance from spindle nut to lower edge of counterholder: 145 mmHorizontal spindle center to table reach: 0 - 400 mmVertical spindle clearance to table: 0 - 500 mmDistance from vertical spindle center to main stand: 100 - 500 mmSpeeds of the work spindle 16 Dr. Ing. horizontally: 32 - 2800 rpm.16 speeds vertical: 32 - 2800 rpm.Feed rates stepless for all three directionslongitudinal: 15 - 600 mmtransverse: 15 - 600 mmvertical: 6 - 240 mmRapid traverse for all three directions of movement along: 2000 mm / mintransverse: 2000 mm / minvertical: 800 mm / minTotal engine power: 9.6 hpWeight approx. 2700 kgTotal height: 1740 mmused, from oper ...

Category: 103 milling machines / Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794368

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Vertical milling machine make RECKERMANN type GFS 1500Year of construction 1988Table size: 1500 x 560 mmTable movement lengthwise: 800 mmTable movement across: 420 mmTable movement vertical: 450 mm16 spindle speeds: 32 - 1800 rpm.Quill adjustment: 125 mmTool holder: ISA 5018 longitudinal and transversal feeds: 8 - 400 mm / min.18 vertical feeds: 3.2 - 160 mm / min.Rapid traverse longitudinally and transversely: 3.5 m / min.Rapid traverse vertical: 1400 mmProjection (stand / center spindle): 150 - 600 mmDistance table / spindle: 45 - 620 mmDrive power: 6.4 / 7.8 kWWeight approx: 4.5 tOutside dimensions approx. 2250 x 2100 x 2150 mmWith- Mot. brake for spindle lock during tool change- Vertical milling head + - 90 ° swiveling- Cooling device- different tool holdersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or  ...

Category: 103 milling machines / Universal Tool-Milling Machines
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 136334074

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Land-de

add to watchlist

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Category: 103 milling machines / Universal Milling Machines
Latest update: 18.10.2023 add to watchlist
approved
dealer
item-No.: 153915682
New in: 1972

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Land-de

add to watchlist

Table clamping surface: 400 x 1500 mm Table movement x: 1130 mm Table movement y: 320 mm Table movement z: 430 mm Spindle holder: ISA 50 Spindle speeds: Horizontal/vertical spindle 32-1500/25-1200 rpm Feeds longitudinally and transversely: 15 - 600 mm/min Feeds vertical: 6 - 240 mm/min Space requirement: 2500 x 2200 x 1900 mm Weight: 3000 kg

Category: 103 milling machines / Horizontal Milling Machines
Latest update: 17.01.2024 add to watchlist
item-No.: 161499530
New in: 1990

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de
Price: VB 6.500 € add to watchlist

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Category: 103 milling machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 124168046

used

check Seller: CNC Servicetechnik Sperling
Location: Rutgerweg 8, 44894 Bochum, DE Land-de

add to watchlist

See pictures under electricity with accessories immediately available

Category: 103 milling machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 124184102

used

check Seller: CNC Servicetechnik Sperling
Location: Rutgerweg 8, 44894 Bochum, DE Land-de

add to watchlist

See pictures under current with accessories now available

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669611
New in: 2009

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

X-travel: 1000mm, y-travel: 500mm, z-travel: 450mm, rotational speed 60-3600/min, table dimensions: 1300x500mm, max. load: 2t, controls: Heidenhain TNC 320, with documentation, without accessories.

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669647

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Rotational speed: 55-2800/min.

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156637737
New in: 1974

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

x-travel: 600 mm y-travel: 250 mm z-travel: 350 mm total power requirement: 5,5 kW Universal Production and Toolroom Milling Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 2500 miscellaneous
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163590297

used

check Seller: Surplex GmbH
Location: Velen-Ramsdorf Land-de
Price: used machinery auction RESALE 2.900 € add to watchlist

Description: Tool milling machine with - Digital display - Rapid traverse - Emergency stop switch - Vertical milling head with drilling quill 115mm - Coolant facility - Machine light x-travel 800 mm y-travel 250 mm z-travel 400 mm Table size 1000 x 400 mm Spindle mount ISO 40 Spindle speeds 32 - 1400 rpm Operating voltage 400 V Quill stroke 115 mm Machine weight approx. 2.8 t Space requirement approx. 2.3 x 1.7 x 1.9 m Approx. Onsite Dimension. (l x w x h): 2,300 x 1,700 x 1,900 mm, weight approx.: 2,800 kg

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669498
New in: 2007

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

X-axis: 1050mm, y-axis: 560mm, z-axis: 520mm, table dimensions: 1200x515mm, max. workpiece weight: 800kg, tool holder: SK40 DIN 69871 / HSK A63, control: Heidenhain iTNC 530, with documentation, an inspection is possible.

Category: 103 milling machines / Console Milling Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156797834
New in: 1987

used

check Seller: Christoph Busch GmbH
Location: Land-de

add to watchlist

x-travel: 720 mm y-travel: 200 mm z-travel: 350 mm tool adaptor: SK40 : max. 1.400 U/min quill stroke: mm : weight of the machine ca.: 3,2 t : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines / CNC Milling Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 157045669
New in: 1990

used

check Seller: Christoph Busch GmbH
Location: Scherfhausen Land-de

add to watchlist

Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218417

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 1050 mm Cross Y: 560 mm Vertical Z: 520 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Spindle Taper:           40ISO/Bt/Mk Power on spindle:        12kW X – Travel:              1.050mm Y – Travel:              560mm Z – Travel:              520mm Table load:              1.000kg Speeds / ranges:         8000Rpm ATC / revolver:          20 Number of controlled axis:3 Feed rate X-Axis:        16,000 mm Feed rate Y-Axis:        16,000 mm Feed rate Z-Axis:        12,000 mm Length:  ...

Category: 103 milling machines / Universal Milling And Boring Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161032352
New in: 1988

used

Location: Land-de

add to watchlist

x-travel: . mm y-travel: . mm z-travel: . mm Control: Heidenhain type: TNC 135 table surface area: 1300x400 mm turning speeds: 2800 U/min coolant: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816391

used

Location: Land-de
Price: 680 € add to watchlist

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Reckermann, dividing head with: three-jaw chuck -Type: UTA 125 -Three-jaw chuck: Rohm Ø 160 mm, inner Ø 32 mm -Spindle bore: Ø 25 mm -Dimensions: 500/420 / H220 mm -Weight: 54 kg

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163220358
New in: 2014

used

check Seller: Gustav Schönberger GmbH
Location: Heilbronn Land-de

add to watchlist

x-travel: 1050 mm y-travel: 560 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain iTNC530 CNC control with 4. Axis (NC-dividing head) electronical handwheel 24-fold tool changer coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 1050 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper HSK 63A Drehzahl / spindle speed 10000 UpM /rpm Tischaufspannfläche / table clamping area 1250x515 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Eilgang X,Y,Z / rapid feed X,Y,Z 30/30/20 m/min Antriebsleistung Spindel / drive capacity spindle 16 kW Gewicht ca. / weight ca. 4900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not bind ...

Category: 103 milling machines / Bed Milling Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163452332
New in: 1987

used

check Seller: desba Trading
Location: Land-de

add to watchlist

x-travel: 1500 mm y-travel: 600 mm z-travel: 450 mm Control: Heidenhain TNC 155 total power requirement: 28,4 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 202 milling machines
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 67805457

new

check Seller: CNC-STEP GmbH & Co. KG
Location: Land-de
Price: 33.556 € add to watchlist

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453644
New in: 1974

used

Location: Land-de
Price: 900 € add to watchlist

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Category: 202 milling machines
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 67805416

new

check Seller: CNC-STEP GmbH & Co. KG
Location: Land-de
Price: 22.846 € add to watchlist

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Category: 101 boring mills and machining centers
Latest update: 22.03.2023 add to watchlist
approved
dealer
item-No.: 153818055

used

check Seller: CNC-STEP GmbH & Co. KG
Location: Land-de
Price: 12.186 € add to watchlist

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Category: 109 other metal working machines
Latest update: 22.03.2023 add to watchlist
approved
dealer
item-No.: 153818056

new

check Seller: CNC-STEP GmbH & Co. KG
Location: Land-de
Price: 18.493 € add to watchlist

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RECKERMANN 3rd category level
  • RECKERMANN bed milling machines (1)
  • RECKERMANN cnc milling machines (1)
  • RECKERMANN cnc universal milling machines (1)
  • RECKERMANN console milling machines (1)
  • RECKERMANN horizontal milling machines (1)
  • RECKERMANN milling machines (2)
  • RECKERMANN processing centers (1)
  • RECKERMANN universal milling and boring machines (1)
  • RECKERMANN universal milling machines (1)
  • RECKERMANN universal tool-milling machines (1)
 
RESALE used machinery 25 years online