used RAVENSBURG Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Facing lathe Fabr. RAVENSBURGMachine -No: 7416, built in 1974Faceplate diameter: 1000 mmCenter height in the offset: 930 mmTurning diameter in the crank: 1860 mmTop height ü. Support: 450 mmTurning diameter ü. Support: 900 mm12 spindle speeds: 6 - 270 rpm.24 autom. Feed rates: 0.04 - 2.82 rpm.Support - Longitudinal travel: 1250 mmSpindle bore: 80 mmDrive power: 15 kWExternal dimensions: 4000 x 1500 x 1800 mmWith- Face plate 1000 mm Drm.- Quadruple steel holder- Support travel longitudinally and transverselyused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3 guideway flat bed lathe Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm

Key data: 2000 , 9470

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

Turning diameter: 1200 mm Center distance: 6500 mm Spindle bore: 150 mm Numbers of bed guide ways: 3 Weight between centres maximum: 7000 kg CNC Brand: Siemens CNC latheRavensburg - KV1 - 700 CNC  Work load flying in chuck 2500 Kg Work load supported 10000 Kg 4 Chuck 1000 mm with heavy jaws Clamping inside 200-1120 mm  Clam;ping outside 80-1000 mm  C-Steady rest 100-450 mm x 7000 Kg C-Steady rest 400-600 mmx 7000 kg Sauter 6 position revolver Swing over bed Ø:        1200mm Swing over cross slide Ø:700mm DBC Turning Length:      6500mm Spindle bore:            150mm Spindle power:           80kW Tailstock spindle Ø:     200Ø Stroke pinole:           200mm Spindle taper:        &nbs ...

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

faceplate diameter: 1300 mm turning diameter over slide rest: 850 mm centre distance: 1800 mm turning diameter: 2150 mm turning speeds: 3,15-160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 2000 mm Control: Siemens spindle passage: 90 mm type: Sinumerik 3T Tool changer: 16 number of spindle speeds: 2,4-900 U/min spindle motor: 54 kW tail stock: 3 jaw chuck Forckrath: 630 mm chip conveyor: total power requirement: 87 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11x4,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Ravensburg A2,2 circulation diameter max.: 2.200 mm diameter of quill: 90 mm weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...

Vertical shaping machine manufactured by RAVENSBURG type S 200Technical specifications:Large stroke of the ram: 200 mmRam adjustment: 200 mmRound table diameter: 440 mmThroat: 410 mmGroove width max: 32 mmHeight between table and ram guide: 370/470 mmLongitudinal table displacement: 375 mmCross table displacement: 350 mm4 lifting speeds: 33/49/75/110 H / min6 feeds, lengthways per slide stroke: 0.03 - 0.3 mmacross per ram stroke: 0.07 - 0.7 mmround per ram stroke at 100 mm diameter: 0.05 - 0.5 mmDrive power: 3.0 kWDimensions approx: 1000 x 1600 x 2200 mmWeight: 2000 kgWith- Round dividing tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

turning diameter external: 4.300 turning length: 3.600 mm swing diameter over bed slide: 3.040 mm bar passage: 140 mm turning speed range: 0.18-92 U/min digital readout: HEIDENHAIN total power requirement: 56 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9.450 x 4.700 x 4.400 m New in 1976 / 2019 - 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1400 mm turning length: 6000 mm control: Siemens 8 T turning diameter over bed slide: 1000 mm centre height: 800 mm workpiece weight flying clamped: 4500 Kg max. workpiece weight between centres: 20000 kg workpiece weight with 2 steadies: 30000 kg faceplate diameter: 1300 mm faceplate turning speed range: 1,4-400 U/min drive capacity - spindle motor: 112 kW max. torque on the faceplate: 40.000 Nm z-axis: 6500 mm x-axis: 700 mm feeds x-axis: 0,05-50 mm/min feeds z-axis: 0,05-50 mm/min rapid speed: 6000 mm/min feed power in the axis x + z: 35.000 N tailstock - quill dia: 250 mm quill stroke: 260 mm Tailstock quill travel speed: 1-500 mm/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...

Manufacturer / model RAVENSBURG P 30 New in 1976 / 2019 Swing Over Bed 3.040 mm. Swivel diameter in pocket 4.300 mm. Turning length 3.600 mm Turning length 140 mm. Speed Range 0.18-92 rpm. Speeds 36 4 axis digital readout system HEIDENHAIN 8 independent jaw chuck Ø2.500 mm. INCLUDED Max workpiece allowed 25.000 kg Equiped with tolos and jaws INCLUDED Total power 56 kW Machine weight 55.000 kg Machine dimensions (LxWxH) 9.450 x 4.700 x 4.400 mm.

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock

TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H)*: 1380 x 640 x 500 mm Weight approx.: 235 kg * without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency invert ...