Category: 110 accessories for machine tools / Facing Heads With 1 Or 2 Facing Slides
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 144050432

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de

add to watchlist

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Category: 102 lathes / Facing Lathes With Tailstock
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 120876761
New in: 1986

used

Location: Land-nl

add to watchlist

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Category: 102 lathes / Facing Lathes With Tailstock
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153869339
New in: 1986

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Category: 102 lathes / Facing Lathes
Latest update: 30.10.2023 add to watchlist
approved
dealer
item-No.: 160072880

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

Facing lathe DP 800

Category: 102 lathes / Facing Lathes
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 160337542
New in: 1976

used

Location: Land-de

add to watchlist

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 160723558

used

Location: Land-nl

add to watchlist

Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø:        1900mm Swing over cross slide Ø:1520mm DBC Turning Length:      2500mm Spindle bore:            102mm Spindle power:           45kW Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Length:                  6800mm Width:                   2800mm Height:                  2800mm Weight:                  10000kg

Category: 102 lathes / Facing Lathes With Tailstock
Latest update: 13.01.2024 add to watchlist
item-No.: 160770711

used

Seller: CS-Maschinen
Location: 66701 Beckingen Land-de

add to watchlist

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 161541936

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Turning diameter: 3000 mm Turning length (Z-axis): 3000 mm Spindle bore: 0 mm Turret positions: 0 Motor power: 0 HP/kW Chuck diameter: 0 mm CNC Model: 0 Max. thickness in 40 Kg/mm2 13 mm Max. thickness in 60 Kg/mm2 10 mm Max. workpiece:        3000Ø Maximum sheet thickness:13mm Max. dishing radius:   40mm Min. product Ø:        800 Length:                2875mm Width:                 990mm Height:                2010mm Weight:                2120kg  

Category: 102 lathes / Facing Lathes
Latest update: 28.06.2023 add to watchlist
approved
dealer
item-No.: 161757361
New in: 1988

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42-240 Rudniki Land-pl
Price: 40.000 € add to watchlist

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

Category: 102 lathes / Facing Lathes With Tailstock
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 162197526
New in: 1979

used

check Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg Land-de

add to watchlist

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Category: 102 lathes / Facing Lathes
Latest update: 29.01.2024 add to watchlist
approved
dealer
item-No.: 163239155

used

check Seller: Schneider-Maschinen
Location: 53340 Meckenheim Land-de
Price: 3.990 € add to watchlist

Large head lathe Automatic feed in both axes Face plate 800 mm Turning diameter max. approx. 1400 mm

Category: 102 lathes / Facing Lathes
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510489

used

check Seller: RVM heavy machines
Location: Land-de
Price: 35.500 € add to watchlist

Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW

Category: 102 lathes / Facing Lathes
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 163651790

used

Location: Land-nl

add to watchlist

Key data: 1800 mm, 3000 mm

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

Category: 102 lathes
Latest update: 28.03.2024 add to watchlist
item-No.: 163675197
New in: 1991

used

Seller: HD Werkzeugmaschinenhandel GmbH
Location: Butzbach

add to watchlist

max. workpiece diameter:110 mm min. workpiece diameter:3 mm workpiece length:30 -400 mm total power requirement:11 kW

Category: 102 lathes / Facing Disks
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161644605

used

check Seller: FH-SMG
Location: 7547S Enschede Land-nl
Price: 4.000 € add to watchlist

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162100021

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 1.250 € add to watchlist

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162100095

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 220 € add to watchlist

Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162100251

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 140 € add to watchlist

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162100255

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 120 € add to watchlist

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162100257

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 120 € add to watchlist

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

Category: 833 post press: gatherers
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 163060432
New in: 2006

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: Land-de

add to watchlist

MKW Gathering Machine Rapid UT B3, with SFT 350, 8 stations, with circulating conveyor belt, with booklet/fold and front trimming

Category: 110 accessories for machine tools
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163483313

used

check Seller: Surplex GmbH
Location: Kölleda Land-de
Price: used machinery auction RESALE 125 € add to watchlist

Description: SK 40 boring head, facing head, knockout head Manufacturer: WMW, Type: C 100-40, SK 40 boring head, facing head, knockout head Approx. Onsite Dimension. (l x w x h): 350 x 250 x 150 mm, weight approx.: 7 kg

Category: 110 accessories for machine tools
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163483314

used

check Seller: Surplex GmbH
Location: Kölleda Land-de
Price: used machinery auction RESALE 75 € add to watchlist

Description: SK 40 boring head, facing head, knockout head Manufacturer: WMW, Type: C 100-40, SK 40 boring head, facing head, knockout head Approx. Onsite Dimension. (l x w x h): 350 x 250 x 150 mm, weight approx.: 7 kg

Category: 102 lathes / Facing Lathes
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163575957
New in: 2008

used

check Seller: Surplex GmbH
Location: Klipphausen Land-de
Price: used machinery auction RESALE 3.500 € add to watchlist

Description: Control : HEIDENHAIN Main spindle: Spindle holder according to DIN 55027: Size 11 Spindle bore diameter 130 mm Spindle diameter in front bearing: 170 mm Main drive: Drive power ( 100/60% ED) : 22/30kW Maximum torque: 3200 Nm Performance data of the X-axis ( facing slide) Maximum travel : 725 mm Feed force: 14 kN Speed: 4 m/min Performance data of the Z-axis (bed slide) Maximum travel : 400 mm Feed force: 18 kN Speed: 7m/min Working range: Jaw opening: 750 mm Swing diameter in the jaw opening: 1600 mm Turning tool cross-section: 32x25 mm depending on tool carrier Permissible workpiece weight: overhung incl. face plate: 1000 kg Centre of gravity distance: 200 mm faceplate diameter: 1,000 mm, spindle bore: 130 mm, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,880 x 2,100 mm

Category: 102 lathes
Latest update: 28.03.2024 add to watchlist
item-No.: 163674924
New in: 1993

used

Seller: GK Werkzeugmaschinen GmbH
Location: Standort

add to watchlist

turning diameter:2000 mm faceplate diameter:2000 mm max. workpiece weight:6000 (fliegend) kg weight of the machine ca.:30 t main drive motor:55 kW

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online