We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350*100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loadin ...
used
Hydraulic tool testing press and small batch press, Nominal force : 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under electricity.
used
pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years
used
Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.
used
Automatic punching machine Brand: Zeulenroda Raster Type: PDA 100 Year of construction: 1995 Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table Ram: 387 mm min. ram stroke: 6 mm ram stroke: 82 mm Ram position: 100 mm Ram surface: 900 x 500 mm Table surface: 1200 x 710 mm Diarrhoea opening: 120 x 400 mm Roller feed WE 16 Feed length: 6500 mm Max bandwidth: 160 mm Material thickness: 0 – 3 mm Cross section for steel: 300 mm² Feed length: 0.1 mm Roller diameter: 63 mm Belt speed: 40 m/min Dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine is in our warehouse. Viewing under power possible at any time. Repair/overhaul of th ...
used
Automatic punching machine Brand: Zeulenroda Raster Type: PDA 100 Year of construction: 1995 Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table Ram: 387 mm min. ram stroke: 6 mm ram stroke: 82 mm Ram position: 100 mm Ram surface: 900 x 500 mm Table surface: 1200 x 710 mm Diarrhoea opening: 120 x 400 mm Roller feed WE 16 Feed length: 6500 mm Max bandwidth: 160 mm Material thickness: 0 – 3 mm Cross section for steel: 300 mm² Feed length: 0.1 mm Roller diameter: 63 mm Belt speed: 40 m/min Dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine is in our warehouse. Viewing under power possible at any time. Repair/overhaul of th ...
used
Electric tool changer RASTER Premat EWD20
used
Nominal force: 2500kN, hydraulic pressure: 186bar, connected load: 24kW, weight: 8.5t.
used
Motorized reel make RASTER type 4 VAR/KMachine -No: 5612/5 built in 1985Technical specifications:Load capacity: 300 kgBelt width max.: 200 mmCoil diameter: 800mmApprox. weight: 320 kgDimensions approx.: 1020 x 1000 x 1460 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 80 t : 489 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 to SLIDE (MECHAN. PRESS) stroke rate (min.): 200 /min stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS total weight approx.: 3600 kg ATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 to PRESS TABLE table surface (left-right): 350 mm table surface (front-back): 330 mm SLIDE (MECHAN. PRESS) stroke rate (min.): 250 /min stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS total weight approx.: 3800 kg ATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
Capacity: 100 ton Ram stroke: 6 - 82 mm Slide adjustment: 100 mm Table surface area : 1.200 x 710 mm Slide area: 900 x 500 mm Number of strokes: 50 / 200 s.p.m. Required power: 18,5 kW Dimensions L x W x H: 2700 x 2400 x 3500 mm Weight of machine approx.: 13,5 ton
used
Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton
used
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
used
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
used
Pneumatic marking press stroke length: 150 mm Maximum pressure capacity: 8 bar Movement stage: 420 x 750 mm Between posts: 650 mm Connection: Pneumatic Dimensions Lxwxh: 85 x 100 x 170 cm Machine weight: 300 kg
used
With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work
used
With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.
used
Punching machine make WEINGARTEN type XKSHw 30Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.
used
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
used
Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg