We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
used
Mk 5, 14 - 1800 rpm, drilling spindle stroke 400 mm, 0.05 - 2.5 mm/U, weight approx. 7 t Further: Radial WMW BR 56/1600 Radial drilling machine Raboma 12 Uh 1250 with turning tensioner 2 squid reversing tensioner 800 mm see pictures
used
Extension 1250 mm
used
bore capacity in steel (diameter): 55 mm arm length: 2055 mm workpiece height max.: mm spindle taper MT: 5 spindle turning speed range: 11,2 - 1400 U/min column diameter: 450 mm spindle stroke - max.: 540 mm feed motor: 0,037 - 2,0 kW total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2580 x 1100 x 3450 mm m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length:1600 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm
used
arm length:1600 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm
used
bore capacity in steel (diameter): 55 mm arm length: 435 / 2000 mm workpiece height max.: 1500 mm spindle taper: MK 5 spindle turning speed range: 14 - 1800 U/min feeds: 0,025 - 1,25 mm/U quill stroke: 400 mm distance spindle/base plate: 665 / 1850 mm base plate surface area: 2120 x 1130 mm bore capacity in cast iron: 70 mm total power requirement: 5,7 kW weight of the machine ca.: 7 t Accessories: box table 1000 x 1000 x 490 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg
used
table length: 1010 mm table width: 750 mm table height: 500 mm weight of the machine ca.: 500 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): / mm arm length: / mm workpiece height max.: / mm total power requirement: / kW weight of the machine ca.: / t required space: / m The pallets lying on the machine are not included in the scope of delivery. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter):55 mm arm length:1600 mm total power requirement:4 kW weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm
used
CNC controller: FP 80 Axes: X-axis travel mm: 300 Y-axis travel mm: 250 Z-axis travel mm: 250 Distance between table surface and electrode clamp surface (for standard electrode and table): 223 - 473 Max. Electrode weight kg: 25 Worktable: Table dimensions mm: 500x350 Maximum workpiece size (W × D × H)) mm: 740x470x130 Max. workpiece weight kg: 550 Working tank inner dimensions (W x D x H) mm: 770x500x230 Dielectric fluid reservoir capacity L: 165 Dielectric fluid filter method: paper filter Basic machine dimensions / weight: Length mm: 1.460 Width mm: 1.900 Height mm: 2.075 Weight kg: 2.000
used
Table size 450 x 210 mm Longitudinal travel 300 mm Cross travel 200 mm Vertical travel 370 mm Equipped with: Digital Coolant
used
Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.
used
Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.
used
Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.
used
Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005
used
Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20087, built in 1997Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mixed lot of new and used deep hole drills gemaess list
used
Bench drill with pneumatic. Feed Fabr. IXION type BT 23Fabr -No: 140268Continuous drilling capacity: 23 mmNormal drilling capacity: 28 mmSpindle: MK 310 spindle speeds: 80 - 1400 rpmDischarge: 260 mmDistance spindle / table: 260 - 600 mmTable: 390 x 420 mmColumn diameter. : 110 mmTotal height approx. 1200 mmEngine: 1.0 / 0.6 kWWeight approx.: 215 kgWith- Pneumatic-hydraulic feed unit VE 22xa0xa0 Drilling capacity 20 mmxa0xa0 Drilling depth 100 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Prec. Fine boring machine make OVERBECK type Zetto 03Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Underframe- without transformerused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1130 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- TransformerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bench drill make ROMANIA type G 13Fabr. -No: E647, built in 1973Technical specifications:Drilling capacity: 13 mm8 spindle speeds: 425 - 4500 RPM.Throat: 200 mmTable size processing area: 250 x 300 mmTable size with channel: 340 x 370 mmColumn diameter: 80 mmelectr. Connection: 1.35 kWExternal dimensions of the drill L x W x H: 800 x 370 x 950 mmColor greenWith- underframe- V-belt driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.
used
Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools