used PRINZING Motorized Beading Machines

Beading machine Prinzing Type SME 200/11 Year of construction 2006 Projection 1100mm Connected load 5,5KW sheet thickness 1.5mm VA Control Siemens Siematic OP7 Extras: -Parallel lining of the top roll with rolling bearing working shafts -infinitely variable motor for drive -motorized delivery of the harmonic, infinitely variable -Feed control for automatic with sensor control Sheet metal guide device in table design Total weight 6700kg The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Prinzing circular shears type: KSE 12/10, in mint condition with two driven rollers and accessories. For cutting circles approx. 70-1000mm and forming for standing seam.

OSTAS SWAGING MACHINE TYPE KMRP 2.5 -Capaciteit 2.5 mm -Roll met 4 sets -Voetbediening -Remmotor -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS SWAGING MACHINE TYPE KMRH 4.0 -Capaciteit 4 mm -Rol hydraulic verstelling -Voetbediening -Remmotor -Roll met 4 sets -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: -Material thickness 1.25 mm -maximum throat depth 180 mm -Roller Center distance 63 mm -maximum thickness at 40 kg / mm² strength 1.25 mm -Working speed approx. 6 + 12 m / min -Drive: 400 V / 0.7 / 0,85 kW - space requirement approx. B 550 x H 1250 X 1000 mm -Weight approx. 120 kg -with: - E - foot switch

OSTAS SWAGING MACHINE TYPE KMRP 1.8 -Capaciteit 1.8 mm -Verschillende sets roll met -Voetbediening -Remmotor -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

- Capacity 2.5 mm - Adjustment of the hydraulic roller - Foot switch Hdr2sxd - Brake motor - With 4 roller sets - Emergency stop - 400V

Specifications: - max. material thickness at 40 kg/mm² strength approx. 3 mm - Shaft mount 45 mm - manual hydraulic feed of the top roller - E. foot switch - Drive 400 V / 1.1 kW - Space requirement approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Key data: 1 mm

Type 412 – 80 / 1,75 . Specifications: Wakzen center distance 80 mm Sheet thickness 1.75 mm at 400 N/mm² Projection 315 mm

Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg

OSTAS SWAGING MACHINE TYPE KMRP 1.2 -Capaciteit 1,2 mm -Uitlading 250 mm -Roll met 8 sets -Voetbediening -Remmotor -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS SWAGING MACHINE TYPE 1.2 KM -Capaciteit 1,2 mm -Uitlading 250 mm -Roll met 8 sets PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER SWAGING MACHINE TYPE IKS 1.0 -Capaciteit 1 mm -Roll met 7 sets PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS SWAGING MACHINE TYPE KMRP 2.5 -Capaciteit 2.5 mm -Hydraulic -Roll met 4 sets -Voetbediening -Remmotor -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS SEEPAGE MACHINE TYPE KMRP 1.2 - Capaciteit 1.2 mm - Uitlading 250 mm - Met 8 sets roll - Voetbediening - Remmotor - Noodstop - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

Mot. Beading machine make RAS type 12.30Masch. -No: 246/9 built in 1973Roller center distance: 68 mmMax. Sheet thickness at 40 kg strength: 1.75 mmMax. working depth: 250 mmWorking speed: 8.8 m / minDrive power: 0.55 kWDimensions L x W x H: 520 x 700 x 1350 mmWeight approx: 200 kgWith- pneum. Delivery of the harmonic- Footswitchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized beading machine make FASTI type 401 45 - 0.8Mach.-No.. 8341 106, built in 1983Roller center distance: 45 mmMax. Sheet thickness: 0.8 mmgr. projection: 180 mmWorking depth: 185 mmDimensions L x W x H approx: 200 x 500 x 600 mmWeight: 22 kgWith- Motor drive 0.25 kW- Underframe- FootswitchThe machine is originally hand-operated and was built on its ownMotor drive rebuiltused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized beading machine make STÜCKMANN & HILLEN type 462.12Machine -No: RM9211102, built in 2002Roller center distance: 50 mmlargest working depth: 200 mmMax. Sheet thickness: 1.25 mm2 speeds: 4 + 8 m / min.Drive power: 0.6 / 0.75 kWStrim connection: 380 V / 50 HzWeight: 70 kgExternal dimensions: 900 x 220 x 380 mmWith- Geared motor 2 speeds- Footswitch- 1 set of bead rollersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual beading machine make RAS type 11.11Fabr. -No: 39/9 built in 1984Max. Sheet thickness: 1.25 mmRoller center distance: 50 mmOutreach: 200 mmWeight approx: 16 kgOutside dimensions approx: 500 x 250 x 400 mmWith- 8 sets of rolls- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Beading machine make RAS type 110 MMachine -No: 69/6 built in 1956Technical specifications:Max. sheet thickness: 1.75 mmmaximum projection: 250 mmDrive power: 0.75 kWWith- foot pedalusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools