used PRIMULTINI Cutting off saws

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Primultini 600x100 shaft multisaw - Italian production - hydraulic feed - upper pulling rollers TECHNICAL PARAMETERS: - cutting width 600 mm - cutting height 100 mm - engine power 30 kW - maximum element width 680 mm - minimum material length 800 mm - disc diameter max 350 mm - shaft diameter 80 mm - shaft support - a row of anti-recoil pawls - two upper pulling rollers - three lower pulling rollers - hydraulic feed - hydraulic height adjustment - pump motor power 4 kW Machine dimensions: 230x170x220 cm weight 1800 kg

Primutini Cut-Off Tape Saw Roll diameter 1300mm Roll width 140 mm Cutting width to the right and left of the Saw blade 150mm Cutting height max. 650mm Drive 30 kW

CEMIL TR550A quick miter saw with electronic movable stop, Working direction from left to right, consisting of: - motorized roller conveyor at the entrance, measures 4000x600 mm, with additional manual stop - fast lower miter saw model TR550A with: * Double button cutting control * blade D=550mm * Engine HP 7,5 , volt 380 * useful cutting capacity (HxW) mm 30x397 / 100x347 / 165x175 * ELAP CM77 control for cutting programming (recently changed keyboard) - motorized roller conveyor at the outlet, length 5400mm, with: * electronic stop, useful stroke 5150mm (4900mm with protection mounted at cutting side) .. * transverse supports with wheels and automatic pneumatic ups / downs, for side discharge - frame with inclined supports with rollers for unloading cut pieces, measures about 4500x1500mm Total size about 10 x 2.5 meters. Machine according to CE standards

cutting , trimming saw machine for solid wood MZ PROJECT LC 3000 second hand machine CE regulation: YES lengthwise cutting of solid wood planks and panels length max. of cut mm. 3000 with automatic ( NC ) pusher for cutting width mm.1500 conditions of working : Excellent main motor power Hp 15 weight kgs. 2.600 volt. 380/50

TECHNICAL DATA: Saw blade diameter max mm: 300 Main motor power kW: 1,2 Weight Kg: 120

Code: 0536 Brand: OMS SALVARANI Model: OK 330 - CE Standard Automatic double crosscutting machine for wood, PVC, aluminium, plastic materials - CE standard Technical data: Min/Max cutting length mm 350/3000 Blade diameter mm 330 F20 Rpm 3000 Hydropneumatic blade lowering Manual blade movement by handwheel Cutting capacity at 90° mm 140 x 88 Cutting capacity at 45° mm 98 x 88 No. 2 motors each Hp 2,8 Intermediate support for large workpieces Compressed air 6-8 bar Overall dimensions: mm 3200 x 800 x 1200 h Weight kg 640

Order No. 6720 TECHNICAL DATA - diameter of the main saw 500mm - 35mm spindle diameter - max cutting height 70mm - max material width 210mm - min / max length of the material before cutting 500 / 4000mm - pneumatic blade slide - diameter of the extraction port 100mm, 140mm - overall dimensions: length / width / height 2700x1200x1650mm + control - 3kW engine - feeding table with pull rollers - 0.37kW engine - overall dimensions: length / width / height 5100x900x1000mm - sorter with 4 pneumatic ejectors - 0.75kW engine - overall dimensions length / width / height 5500x1000x1050mm - constant feed speed - total weight 2245 kg - Italian production - original DTR + CE documentation - used machine, very good condition PRODUCT FEATURES The Cursal TRV 2200E 500 optimizer is designed for cross cutting of material. Truncated elements can be grouped according to their le ...

SECOND-HAND BORING AND END CUTTING MACHINE COMEC MOD. FIMOV 2500 2UT+2UF+CA2 - N. 2 tilting cutting units - N. 2 vertical boring units - Maxi working length 250 cm - With automatic loader - Perimetral safety net - S/N 021132 - CE (year 2002)

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

Code: 0003 Brand: BOTTENE Model: PUSH 100 - CE Standard Computer-operated automatic crosscutting machine with pusher for cutting of wooden boards - CE Standard The board fed in is analysed by the pusher and the data processed by the computer, which optimises the length according to different criteria chosen by the user. The boards are fed in by a pusher controlled by a brushless motor. The blade is driven by a motor and pneumatic cylinder located under the machine base. Blade diameter min/max mm 400/550 F30 Blade speed rpm 2800 Cutting capacity: with blade mm 450 mm 300 x 120 - with blade mm 550 mm 350 x 150 Blade motor Hp 5,5 Pusher stroke mm 5000 Max table load length mm 4100 Positioning speed 65 mt/min Working table height mm 915 Unloading table with side ejectors Suction inlet diameter mm 120 Overall dimensions of assembled machine: mm 9900 x 1850 x 1550 h Over ...

CURSAL automatic unloader, for fast miter saws with Working direction from right to left, consisting of: - motorized roller conveyor, useful length 2 mt, roller width 320mm - 4 motorized catenaries for translation of pieces cut at 90° - 3 support supports pieces, for storage on lifting table - BOLZONI lifting table 1500x800mm, capacity 1000 kg, pneumatic lifting, table height closed about 130mm - touch-screen control for line automation, on separate panel - perimeter protections with light curtains - overall dimensions about 2.5 x 4 meters Machine to CE standards, in excellent condition

AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg

AVAILABILITY FROM FEBRUARY 2024 STROMAB pendulum saw model PS/50FP with: - Pneumatic head movement - blade D=500mm - 7.5 HP engine - with roller benches Machine not compliant with CE regulations

AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

Revolving crosscut saw with extremely accurate length cutting for wood. High-precision cutting with servo-drive. Suitable for maximum dimensions cutting width up to 370 mm. Machine length: 4.400 mm

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Technical data: Saw blade diameter 1200 mm Max round wood diameter 450 mm Min round wood diameter 50 mm Saw motor power 20 kW / 975 RPM Hydraulic saw hub Dimensions L 3500 mm x W 2000 mm x H 3500 mm Weight 3600 kg + Conveyor 10 m with 7 hydraulic length stop systems

Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: * 1 mtr each Work table to the left and right of the saw blade * bevelled sheet metal behind saw cut for drainage of Trimming cuts * 2-hand control device * Front saw blade protection * HM saw blade Optionally available: * Pneumatic front guard (TR501/P) * Upper protective device cutting range (TR501/G) * zus. Roller table per mtr. (with roll 60 mm) * manual stop 60 mm * manual stop 250 mm * pneumatic stop 60 mm * pneumatic stop 330 mm * HM saw blade * Laser directional light 220 V

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...

Graule Train saw Cutting width 200mm Cutting height 80mm Engine 230V G&-4063-o0624 Underframe optional

1 new Holtec PICCOLO the Piccolo is handy, precise and flexible. mobile parcel crosscut saw in light design, e.g. for cutting and finishing on sawn timber packages Chain set with STIHL chain Type Rapid Super 0.404" for extremely fine surfaces and two-sided adjustable guide rails (can be used four times) Electric motor 7.5 kW great cutting performance for packages up to 1.15 m x 1.15 m and roundwood diameter up to 1.30 m Sword Length: 1.60 m