british flag
Resale Logo

Pressure used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information products for the food industry  Eurolux GmbH  http://www.eurolux-ag.com 
banner logo
start page > keywords Pressure > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale
CNC Turning- and Milling Center


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125460797 101

EMCO MC 1200 for sale
Machining Center - Vertical


x-travel: 1.200 mmy-travel: 600 mmz-travel: 600 mmControl: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: 50 - 10.000 min/-1power capacity - main spindel: 25 kWmax. Torque: 70 Nmtool taper: SK 40 d ...
used machine
 
x-travel: 1.200 mm
y-travel: 600 mm
z-travel: 600 mm
Control: TNC 620 Heidenhain
Main spindle::
turning speed range - main spindle: 50 - 10.000 min/-1
power capacity - main spindel: 25 kW
max. Torque: 70 Nm
tool taper: SK 40
distance spindle nose and table: 120 - 720 mm
work table::
table surface area: 1.400 x 650 mm
number of T-slots: 5
T-slot - width: 18 H8 mm
tool magazin::
number of toolpositions: 30 pos.
tool taper: SK 40
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 125 mm
max. tool length: 280 mm
max. tool weight: 8,0 kg
max. total weight: 100 kg
tool changing time: 1,6 sec
feeds::
rapid traverse: 40 m/min
feed speeds: 20.000 mm/min
Accelaration: 5 m/s²
feed power: 5,8 kN
total power requirement: 35 kVA
weight of the machine ca.: 7,7 t
dimensions of the machine ca.: 5,0 x 4,0 x 3,2 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 30 bar
through spindle coolant:
paper band filter:
interface 4. axis:
4. axis: defekt / defect
Automatic Tool Changer:
elektr. hand wheel:
CNC - Machiningcenter Vertical
EMCO - MC 1200

- only ca. 4.900h Spindle-Runtime



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
125465311 206

ITALPRESSE UT6L for sale
Hydraulic veneering presses


HOT PRESS Type ITALPRESSE UT/6L Solid Steel Plates heathed by water with wood fired boiler useful size plates mm. 2500 x 1300 n.06 cylinders diam.mm. 70 max. open mm. 650 hydraulic pump motor power Hp 2 Thrust Ton ...

 
HOT PRESS Type ITALPRESSE UT/6L
Solid Steel Plates
heathed by water with wood fired boiler
useful size plates mm. 2500 x 1300
n.06 cylinders diam.mm. 70
max. open mm. 650
hydraulic pump motor power Hp 2
Thrust Ton.120
max. pressure 4 kg/cm2

complete with security systems. perimeter rope
closing by bimanual buttons
opening by electric button
exclusion of 2 cylinders from the control panel
Volt. 380/50
net weigth kgs.4500
working conditions : Excellent
 
Price  
  IT   request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
125465301 203

WEINIG U17A for sale
Four-sided planing machines


MULTISPINDLE MACHINE Type WEINIG U17A indipendent motors for each planing spindle composed by 6 Spindles : 1) Surface planer 2) Moulder ( right ) 3) Moulder ( left ) 4) Moulder ( right ) 5) Thickness Planer 6) Un ...

 
MULTISPINDLE MACHINE Type WEINIG U17A
indipendent motors for each planing spindle
composed by 6 Spindles :
1) Surface planer
2) Moulder ( right )
3) Moulder ( left )
4) Moulder ( right )
5) Thickness Planer
6) Universal shaft 360°
- max. working width mm. 170
- max. working heigth mm. 120
- length of entry table mm. 1800
- Lift of infeed unit motor Hp 0,5
- Feed speed from 6 to 22 mt./min
- Spindle rotations of working heads rpm. 6000
- Spindle diameter of working heads mm. 40
- Infeed unit with pneumatic pressure
- Table lubrification
- Volt. 380/50
 
Price  
  IT   request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452391 107

GRANDINI LTCM 15 for sale
SLITTING- AND CUT TO LENGTH LINE 1.500 x 2/2,5 mm


Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2): Line speed/line speed 20 m / min Coil weight/ ...
used machine
 
Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm
Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2):
Line speed/line speed 20 m / min
Coil weight/coil weight: 5to.
Coil inside diameter/coil inner dia.: 460-508 mm
Coil-AuÃ?endruchmesser/coil outer dia: 1,600 mm
Stacking device/stacking unit: 1,500 x 6,000 mm
Package height approx. / pack geigh about: 400 mm / 5 tons.
Overall performance Motors / motor total power: 14 kW, 380 V, 50 Hz.
Air pressure air pressure: 6 bar
Space required/space requirements: 17 x 5 m

Material: Aluminum, steel, galvanized, painted band, others / aliminium, steel galvanized, perpainted, others
2002
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452359 106

URPEMAK URPE CC 50 for sale
Casting press


Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain. URPEMAK URPE CC 50 casting machine - characteristic parameters: - closing force: 500 kN - closing distance: 260 mm - ejector force:  ...
used machine
 
Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain.

URPEMAK URPE CC 50 casting machine - characteristic parameters:
- closing force: 500 kN
- closing distance: 260 mm
- ejector force: 62.8 kN
- ejector stroke: 50 mm
- mold height (min-max): 100/325 mm
- dimensions of plates: 500 x 500 mm
- distance between columns: 320 x 290 mm
- column diameter: 60 mm
- injection position: 0-50 mm
- maximum casting force: 50 kN
- Injection piston diameter: 45-50-55 mm
- casting feed: 140 mm
- casting surface: 159-196-238 cm2
- injection mass / volume: 91-140-188 cm3
- injection pressure: 314-254-210 daN / cm2
- piston feed: 150 mm
- engine: 11 kW
- weight: 4900 kg
- dimensions: approx. 407 x 225 x 220 cm
2005
22,475 €  
  PL   request
125460766 107

AMADA ITS 2 5020 for sale
Hydr. pressbrake


pressure: 50 tchamfer lenght: 2000 mmdistance between columns: 1690 mmdaylight between press beam: 370 mmthroat: 400 mmstroke: 100 mmfeed down: 82 mm/sec: 10 mm/secfeed up: 80 mm/sectotal power requirement: 4,5 kWweight  ...
used machine
 
pressure: 50 t
chamfer lenght: 2000 mm
distance between columns: 1690 mm
daylight between press beam: 370 mm
throat: 400 mm
stroke: 100 mm
feed down: 82 mm/sec
: 10 mm/sec
feed up: 80 mm/sec
total power requirement: 4,5 kW
weight of the machine ca.: 3.250 kg
dimensions of the machine ca.: 2500x1800x2200 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
1997
Price  
    request
125452355 106

WEKO WE 680-2-20 for sale
Hydraulic Presses


Hydraulic presses WEKO in 680-2-20 was produced in 1997. Technical parameters : - pressure force: approx. 120 t - table base on the form: 46 cm - distance between columns: 67 cm - die stroke: 70 cm
used machine
 
Hydraulic presses WEKO in 680-2-20 was produced in 1997.

Technical parameters :
- pressure force: approx. 120 t
- table base on the form: 46 cm
- distance between columns: 67 cm
- die stroke: 70 cm
1997
4,975 €  
  PL   request
125460768 107

PROMECAM RG 25-12 for sale
Hydr. pressbrake


pressure: 25 tchamfer lenght: 1250 mmdistance between columns: 1020 mmthroat: 200 mmstroke: 100 mmajustment speed: 20 mm/secreturn speed: 80 mm/secweight of the machine ca.: 1270 kgdimensions of the machine ca.: 1310x100 ...
used machine
 
pressure: 25 t
chamfer lenght: 1250 mm
distance between columns: 1020 mm
throat: 200 mm
stroke: 100 mm
ajustment speed: 20 mm/sec
return speed: 80 mm/sec
weight of the machine ca.: 1270 kg
dimensions of the machine ca.: 1310x1000x1715 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
1971
Price  
    request
125452353 106

URPEMAK URPE CFA 220 for sale
Casting press


Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture. Injection molding machine U ...
used machine
 
Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture.

Injection molding machine URPAKAK URPE CFA 220 - technical parameters:
- closing force: 2250 kN
- closing distance: 440 mm
- ejector force: 120 kN
- ejector stroke: 100 mm
- mold height (min-max): 240/600 mm
- dimensions of the panels: 780 x 780 mm
- distance between columns: 510 x 510 mm
- column diameter: 90 mm
- injection position: 0-90-180 mm
- maximum casting force: 121-250 kN
- Injection piston diameter: 40-50-60-70 mm
- casting feed: 360 mm
- casting surface: 113-714 cm2
- injection mass / volume: 301-471-678-923 cm3
- injection pressure: 315-1990 daN / cm2
- engine: 20 kW
- weight: 13000 kg
- dimensions: approx. 590 x 238 x 275 cm
2005
37,475 €  
  PL   request
125460756 107

HERA COP 200/4100 for sale
Hydr. pressbrake


pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 305 mmcolumn arm: 400 mmajustment speed: 100 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/secstroke: 300 mmdayligth: 500 mmtotal power requirement: 1 ...
used machine
 
pressure: 200 t
chamfer lenght: 4100 mm
distance between columns: 305 mm
column arm: 400 mm
ajustment speed: 100 mm/sec
working feed: 1-10 mm/sec
return speed: 100 mm/sec
stroke: 300 mm
dayligth: 500 mm
total power requirement: 18,5 kW
weight of the machine ca.: 19.800 kg.
range L-W-H: 4.600x2.200x3.400 mm
Machine No. 5076
Facilities:
- CYBELEC - CNC control
Model DNC 94 PS-6 (Color 3 D Grapik)
- Controlled axes:
Y1 - Y2 - X - R - Z1 and Z2, and crowning
- Hydraulic-tool clamping
- Different top and bottom tools
- 2Handbedienung/Fußschalter
- Safety press check NEW for 2014
- Demand-instructions in German language


This ad was created with MODUL MWS - the software solution of LogoTech.
1992
Price  
    request
125452333 106

URPEMAK URPE CFA 330 for sale
Casting press


Aluminum injection molding machine URPEMAK URPE CFA 330 was produced in 2008 in Spain. The price of the machine is a melting pot of zinc, with a capacity of approx. 400 l, visible in the last photo. URPEMAK URPE CFA  ...
used machine
 
Aluminum injection molding machine URPEMAK URPE CFA 330 was produced in 2008 in Spain. The price of the machine is a melting pot of zinc, with a capacity of approx. 400 l, visible in the last photo.

URPEMAK URPE CFA 330 casting machine - technical data:
- closing force: 3300 kN
- closing distance: 510 mm
- ejector force: 181 kN
- ejector stroke: 120 mm
- mold height (min-max): 300/700 mm
- dimensions of plates: 910 x 910 mm
- distance between columns: 572 x 572 mm
- diameter of the columns: 115 mm
- injection position: 0-80-160 mm
- maximum casting force: 155-350 kN
- Injection piston diameter: 50-60-70-80 mm
- casting feed: 445 mm
- surface of the cast: 170-1089 cm2
- injection volume / volume: 655-943-1294-1677 cm3
- injection pressure: 308-1782 daN / cm2
- engine: 33 kW
- weight: 16000 kg
- injection molder dimensions: 700 x 270 x 290 cm
2008
37,475 €  
  PL   request
125460504 109

ROTOX EPA 376 for sale
Machine Tool


Weight approx.: 300 kgDimensions (l x w x h) approx.: 1600 x 1500 x 1500 mmDescription: - profile width: min. 40 mm up to max. 120 mm - profile height:max. 100 mm - operating pressure: 7 bar - mains connection:400 V, 4.  ...
used machine
 
Weight approx.: 300 kg
Dimensions (l x w x h) approx.: 1600 x 1500 x 1500 mm
Description: - profile width: min. 40 mm up to max. 120 mm
- profile height:max. 100 mm
- operating pressure: 7 bar
- mains connection:400 V, 4. 2 A, 50 Hz (three-phase current)
- Control: PLC with bus coupling to I/O modules, KLÖCKNER-MÖLLER
- attention:technical data without guarantee!
- for further information see pictures as well as PDF
1991
used machinery auction RESALE 100 €  
  DE   request
125452237 106

EUROMAC Digibend 360 for sale
horizontal boxer press


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-p ...
used machine
 
EUROMAC punching Digibend 360
capacity 36 tonnes
lengh of stroke 250 mm
working speed 10/24-6 mm/sec
hight bending 200 mm
extra high bending 415 mm
oil tank capacity 60 lt aprox
3-phases motor 5.5-4 (hp-kw)
table 580 x 1170 mm
size 680 x 1170 x 1130 mm
weight 900 kg
year 2000 CE

The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing.

• Save up to 100 bend in machine memory.
• Bend the guaranteed accurate to +/-0.05mm.
• Automated for fast, precise production.
• Reduce your set up time.
• Adjusting the machine bending pressure or working speed.
• Monoblock construction.
• Maximum flexibility for bending application (up to 10 tooling)

Benefits:

• With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily.
• Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year.
• Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling.
• Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low

Well in good conditions of use, which ' can be seen connected and running, by appointment.
Specification
The RAM force-tonnage (KN) 36 (160)
Length of stroke 250 mm
Table dimension 1200x580mm
Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm
Weight 900 kg
2000
6,700 €  
    request
125460509 1900

NESTRO NE 300 P for sale
Dust Collector


Weight approx.: 900 kgDimensions (l x w x h) approx.: 1400 x 4000 x 2400 mmDescription: V = 5083 m³ / h, filter surface 33.25 m², negative pressure 2540 Pa, motor power 7.5 kW, rated speed 2800 rpm, exhaust nozzle 300  ...
used machine
 
Weight approx.: 900 kg
Dimensions (l x w x h) approx.: 1400 x 4000 x 2400 mm
Description: V = 5083 m³ / h, filter surface 33.25 m², negative pressure 2540 Pa, motor power 7.5 kW, rated speed 2800 rpm, exhaust nozzle 300 mm. Piping approx. 4000 mm included, pneumatic filter regeneration
2013
used machinery auction RESALE 3,500 €  
  CH   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Mono Progressive Cavity Pump NOV MONO LE 502


max. working pressure: 12bar, rotational speed: 1750/min, max. working temperature: 20°C.

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Turning Machines (Lathes) SPINNER TC80077 SMCY


OVERVIEW: Brand: SPINNER Model: TC80077 SMCY Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2008 Production hours: 19461 Location: Hungary Origin country: Germany GENERAL DATA: Measurements width: 4923 mm Measurements depth: 1980 mm Measurements height: 2090 mm Machine weight: 7500 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D MAIN DRIVE: X-AXIS movement: 360 mm Z-AXIS movement: 980 mm ADDITIONAL EQUIPMENT: 1 - High pressure external cooler 2 - VDI 40 tool holder 3 - Electrostatic external air filter

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

Water Jet Cutting Machines Bystronic ByJet Pro 3015


Waterjet Bystronic ByJet Pro 3015 from year 2008, was built by the renowned Swiss manufacturer of Bystronic Laser AG. Technical data: -table size: 1500x3000 mm-number: 58.805 h-two cutting heads-maximum pressure: 3600 bar -software: ByVision p. 8004C-ByPump 50 APC water cutting machine Bystronic ByJet Pro 3015 worked under the supervision of the service. The last time the machine listed hydraulic seals.

CNC Bending Machines AMADA RG1030EV3


OVERVIEW: Brand: AMADA Model: RG1030EV3 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 23000 Location: India Country of origin: Japan GENERAL DATA: Measurements width: 2210 mm Measurements depth: 4030 mm Measurements height: 2470 mm Machine weight: 6400 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3100 mm Crowning available: CNC Daylight: 100 mm Throat: 400 mm Main motor power: 7.5 HP CONTROL UNIT: Brand: AMADA Model: NC9 Release: AMNCEv3 MOVEMENT: Backgauge-Z: 450 mm MEDIA: Main electronic connection: 400 V Power consumption: 10 kVA Air pressure: 5 bar Oil tank: 65 L

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Transfer Presses ( 2 - 4 Columns) ERFURT PTRZSST 210


Transfer press ERFURT PTRZSST 210 was built in the year 1991 in Germany. The progressive press ERFURT PTRZSST 210/11/280-technical parameters: -maximum pressure: 160 tons -the number of jumps: 20-40 min-1 -the maximum stroke of the upper table: 400 mm -adjustable handles tools: 63 mm -working capacity per stroke: 40 kNm -depth of draw: 125 mm -the strength of the ejector: 50 tons -ejector stroke: 80 mm -adjust the ejector: 63 mm -the range controlled by the ejector: 63 mm -distance between columns: 3500 mm -the distance between the centres of the utility: 280 -number of posts: 10 -overall dimensions: 6.6 x 2 m -weight: 80000 kg

Eccentric Presses FPA PMS 63 CP


Eccentric press FPA PMS 63 CP produced in 1983 by the Warsaw Factory Machines. FPA press parameters PMS 63 CP: -maximum load: 63 tons -size disc table: 800 x 560 mm -outreach, the table height: 280 mm -adjustable pitch slider: 8-110 mm -diving slider: 65, 85, 110 strokes/min. -maximum number of inclusions in the clutch to intermittent traffic: 20 on/min. -the largest distance slider from the table: 315 mm -the diameter of the hole in the table: 250/280 mm -the self-alignment capacity of slider in the direction of the axis: 90 mm -thickness: 90 mm -hole diameter: 140 mm -slider surface dimensions: 350 x 315 mm -the diameter of the hole in the slider: 40 mm -the ground clearance between the walls of the body: 380 mm -the width of the t-slots: 22 mm -air pressure: 4.5 at -the engine speed: 1500 rpm. -engine power: 5.5 kW -dimensions (l x w x h): 1550 x 1400 x 2650 mm-weight: ok. 6200 kg -an intermediate table -foot pedal -DTR-technical-functional

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

PRESSA PER PRESSOFUSIONE MAICO


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

Pallet transport line EUROPA SYSTEM 20.101122.01


Line for pallet transport EUROPE 20.101122.01 SYSTEM was built in the year 2011. The line is intended for the transport of EURO pallets with details that may protrude beyond the skid up to 200 mm, the performance line-to 74 pallets for a change. The line is used for the transport of EURO pallets of goods with the indirect their handling by the operators. Transport takes place on a conveyor line [1.1]-[1.7]. The system consists of: -pallet roller conveyor loading zone [1.1] -a team of two chain conveyors [1.2, 1.3] -non-driven medium roller roller conveyor [1.6] -chain conveyor accumulation of nep?dem [1.7] -gravity roller conveyor [3] -pallet storage built onto conveyor roller [5] -roller conveyor driven [5] -gravity roller conveyor [6] -non-driven medium roller roller conveyor [1.6] -ball tables, used for the transport of EURO pallets conveyor conveyor [7.1, 7.2] Pallet storage lines are used to transport items on pallets. Pallet magazine can fulfill two functions to retrieve the pallets from the line and collected a heap or stack download pallets and then issuing a pallet lines one at a time. Pallet magazine EUROPA 20.101122.01 SYSTEM-technical data: -the maximum stack weight: 600-1000 kg -maximum number of pallets collected by the magazine: 10-25 -operating pressure: 6-8 bar

PRESSA PER PRESSOFUSIONE MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from hours 8:30 at 13:00 and 14:00 at 19:00

ISOLA PRESSOFUSIONE ITALPRESSE


ISOLA CASTING ITALPRESSE BRAND Italpresse MODELL OAL300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm

Eccentric Presses LE 250/40


Eccentric press LE 250/40 was built in the year 1965 in Czechoslovakia by ZTS Kosice. Characteristic data of the press LE 250: -pressure: 250 tonnes -Max. number of beats per minute: 45-pitch slider: 30-140 mm -the self-alignment capacity of slider: 110 mm -table size: 1120 x 805 mm -size slider: 800 x 475 mm -engine power: 22 kW -the size of the machines: 1350 x 2660 x 2975 mm -weight: 12800 kg

Eccentric Presses STANKOIMPORT KD 2330


Eccentric press STANKOIMPORT KD 2330 was built in 1980. Characteristics of the press STANKOIMPORT KD 2330: -nominal pressure: 100 t -table dimensions: 850 x 560 mm -adjustable slider stroke: 10-130 mm -the number of jumps the slider: 95/min -adjust the distance between the table and the slider: 10 mm -the maximum distance between the table and the slider in the lower position the slider at the maximum stroke: 400 mm -the distance from the axis of the slider to the press corps: 320 mm -distance from the press table to guides: 550 mm -the distance between the uprights in clearance: 400 mm -the angle of the body: 10 degrees, 20 degrees, 30 degrees -dimensions of the machine: 1745 x 2360 x 3180 mm -weight: 8650 kg

H-Frame Crank Presses PKrR 200/2


Crank press PKrR framework 200/2 pressure 200 tons was built in 1971 by Zamech-. Technical data of the press PKrR 200/2: -nominal pressure: 200 ton-clearance between uprights: 2000 mm-pitch slider: 200 mm-number of jumps: 23, 27, 32 l/min. -distance from the table slider closed (closed is the distance slider from the table in the lower turning position and first engages a): 630 mm-nastwano?? slider: 150 mm-length: 1000 mm-length slider: 900 mm-hole in the table: 1600 x 600 mm-gr ubo??: interface plate 150 mm-width Windows in the rack: 400 mm-the air pressure in the clutch: 3 atn. -odci??aczach air pressure: 5 bar -intake air when jumping individual: 0.035 Nm3/sk. -maximum number of inclusions in the clutch to intermittent traffic: 12 l/min. -main motor power: 22 kW-RPM main motor: 1500 l/min. -engine power to set the slider: 3 kW-engine speed to set the slider: 1500 l/min. -string device, wypych.: 10 t-string device, the power of przytrz: 40 t-string, stroke: 125 mm -maximum air pressure in the device pass design: 6 atn. -the weight of the tool ci?gowego: 2020 kG -the weight of the press without pads: 30580 kG -overall dimensions of the machine (w x l x h): 3100 x 2150 x 5600 mm

Eccentric Presses ZAMECH PMS 160 A


Eccentric press ZAMECH PMS 160 and produced in 1965 by Zamech-. Characteristics of the press PMS 160 and: -nominal pressure: 160 t -table dimensions: 1140 x 760 mm -thickness: 125 mm -the diameter of the hole in the table: 490/450 mm-diameter hole in the plate: 250 mm -diameter of the socket in a slider: 50 mm -the ground clearance between the walls of the body: 840 mm -adjustable slider jump in gran. : 20-140 mm -the nominal quantity: 40 1/min -outreach to table height: 400 mm -the largest distance between the table and the slider, with the largest jump the slider in the upper position and first engages a: 580 mm -the distance between the table and the guides: 585 mm -the self-alignment capacity of slider in the direction of the axis: 120 mm -electric motor: main: 10 kW, for setting the slider: 1.1 kW -the turnover of the main electric motor: 1420 RPM -the power of air pressure ejector 5.4 atm.: 16000 kG -the biggest jump ejector: 75 mm -indicative cooling air flow: 1.3 Nm3/min -the air pressure in the odci??aczach: 4.8 atm. -maximum air pressure in wyrzutniku: 5.7 atm. -nominal air pressure in the clutch: 4.5 atm. -the weight of the ejector: ok. 400 kg -the weight of the press without ejector: ok. 14100 kg -overall dimensions: 2000 x 2325 x 3390 mm

CNC Hydraulic Plate Shear SAFAN HVR 310-8 TS


CNC guillotine shears SAFAN HVR 310-8 TS produced in 1999 year. The price of the machine is a set of knives. Technical data of the guillotine CNC SAFAN HVR 310-8 TS: -maximum sheet thickness: 8 mm -cutting length: 3100 mm -connection power: 15 kw -connecting voltage: 3 x 400 Volt 50 Hz -maximum working pressure: 300 bar -a safety distance: 12 mm -weight: 9200 kg

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Injection molding machines Engel ES 330H/90V SO-TR


control: EC100 Closing force (t): 90 Mold height min./max.: min 270 Dimensions between posts: 1100 Dimensions of plaque plates Distance. plate: 585 x 340 Worm diameter: 30 Injection volume: 113 Injection pressure: 2180

Rubber injection presses Kloeckner Desma 956.050 ZO


OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1997 Production hours: 47036 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3000 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 220 cm³ Injection pressure: 2340 bar CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 400 V

Eccentric Presses KOSICE LE 160 C


Eccentric press KOSICE LE 160 C was produced in 1981 year in Czechoslovakia by ZTS Kosice. Technical parameters of the KOSICE LE 160 c: -nominal pressure: 160 t -outreach: 355 mm -the self-alignment capacity of slider: 100 mm -adjustable stroke: 20-120 mm -distance slider from the table: 450 mm -the thickness of the intermediate plate: 100 mm -table surface: 995 x 700 mm -hole in the disc table: 290 H8 mm -the number of strokes per minute (continuous operation): 50 -hole in the slider: 50 H8 mm -air consumption: 0.5 Mpa, 28 litres/cycle -demand for power: 11 kW -overall dimensions: (l x w x h): 2310 x 1270 x 2587 mm -weight: kg 10150

Eccentric Presses PLASOMAT PMS 63 MA


Eccentric press PLASOMAT PMS 63 HAS a built in 1989 by the factory Automatic Presses PLASOMAT Warsaw, Poland-Italy. Characteristics of the press PLASOMAT PMS 63MA: -nominal pressure: 63 tons -Board size: 800 x 560 mm -thickness: 90 mm -adjustable pitch slider: 8-110 mm -outreach to table height: 280 mm -the largest distance slider from the table: 315 mm -the diameter of the hole in the table: 280/250 mm -central lubrication system -engine power: 5.5 kW -weight: 5200 kg -dimensions (l x w x h): 1360 x 1530 x 2580 mm

Eccentric Presses PLASOMAT PMS 63 MA


Eccentric press PLASOMAT PMS 63 HAS a built in 1988 by the factory Automatic Presses PLASOMAT Warsaw, Poland-Italy. Characteristics of the press PLASOMAT PMS 63MA: -nominal pressure: 63 tons -adjustable pitch slider: 8-110 mm -outreach to table height: 280 mm -the largest distance slider from the table: 315 mm -Board size: 800x560 mm -thickness: 90 mm -the diameter of the hole in the table: 280/250 mm -engine power: 5.5 kW -central lubrication system -weight: 5200 kg -the press dimensions (l x w x h): 1360 x 1530 x 2580 mm

Eccentric Presses FPA PLASOMAT PMS 63 MA


Eccentric press FPA PLASOMAT PMS 63 HAS built by FPA PLASOMAT Warsaw, Poland-Italy in 1988. FPA presses technical data PLASOMAT PMS 63MA: -nominal pressure: 63 tons -adjustable pitch slider: 8-110 mm -outreach to table height: 280 mm -the largest distance slider from the table: 315 mm -Board size: 800x560 mm -thickness: 90 mm -the diameter of the hole in the table: 280/250 mm -engine power: 5.5 kW -weight: 5200 kg -overall dimensions (l x w x h): 1360 x 1530 x 2580 mm -central lubrication system

Rubber injection presses Kloeckner Desma 956.050 ZO


OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1999 Production hours: 33221 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3100 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 130 cm³ Injection pressure: 1550 bar CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 400 V

CNC Bending Presses LVD PPBL 200/30


Press brake LVD PPBL 200/30 manufactured in 2000. The machine allows you to fold items on length 3100 mm with the force 200 tons. Control and control cabinet have been completely upgraded in November 2017 (on work carried a guarantee). Early upgrades carried out the company HARTMANN from Germany. Technical data of the press LVD PPBL 200/30: -pressure capacity: 200 tons -bending length: 3100 mm -distance: 160 mm -maximum pressure: 300 bar -power: 11 kW -machine weight: 11200 kg -menu machine and manual work: in Polish language -a complete wiring diagram

CNC Bending Presses DENER PUMA CNC 3100 X 200 DMP CNC 20-30


Press brake CNC X 3100 PUMA DENER 200 was built in the year 2012. Characteristics of the press DENER DMP CNC 20-30: -pressure capacity: 200 tons -bending length: 3020 mm -main engine power: 15 kW -oil quantity: 190 l -length: 3940 mm -width: 2500 mm -height: 2690 -weight: 10000 kg

Eccentric Presses BZMP KE 2130


Eccentric press BZMP KE 2130 100 TONNES built 1986 year. The parameters of the technicznbe press BZMP KE 2130 100 TONNES: -nominal pressure: 100 tons -the maximum slider stroke: 130 mm-minimum pitch slider: 10 mm -the number of jumps the slider continuous: 100/min -the number of strokes a slider sweeps: 45/min -the size of the jump to its lower position, which corresponds to the nominal pressure-continuous movements: 2.5 mm -the size of the jump to its lower position, which corresponds to the nominal pressure-sweeps: 5.0 mm -table dimensions: 950 x 630 mm -the maximum distance between the table and the slider in the bottom position at maximum stroke: 400 mm -the distance between the uprights of the body (clearance): 400 mm -the size of the adjustment of the distance between the table and the slider: 100 mm -main engine power: 9 kW -dimensions: 2660 x 2380 x 970 mm -weight: 9500 kg

Refrigeration Dryer DONALDSON Ultrafilter SD 1175 AP


Volume flow: 19.58m³/min, pressure drop: 0.29bar, cooling output: 2600m³ air/h, length: 800mm, width: 900mm, height: 1230mm, weight: 180kg.

Compressor WITTIG ROL 65


Discharge pressure: 9bar, suction pressure: 1000nbar, volume flow: 315m³/h, shaft power: 35kW, motor power: 37kW, rotational speed: 1475/min, number of available compressors: 2.

CNC Punching Machines AMADA PEGA 357


OVERVIEW: Brand: AMADA Model: PEGA 357 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1993 Production hours: 48600 Location: India Origin country: Japan GENERAL DATA: Measurements width: 3770 mm Measurements depth: 4931 mm Measurements height: 2315 mm Machine weight: 11600 kg MAIN DRIVE: Punching force: 300 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: AMADAN Model: 04PC Interface: RS232 MOVEMENT: X-AXIS: Movement: 1830 mm Y-AXIS: Movement: 1270 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 45 Max. tool diameter: 114,3 mm No. of index: 4 MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 18 kVA Air pressure: 6 bar Lubrication tank: 1 L Oil tank: 80 L ADDITIONAL EQUIPMENT: 1 - 30x tools 2 - Stabilizer

Injection Moulding Machine ARBURG ALLROUNDER SELECTA 270 S 250-1


Max. injection pressure: 2210bar, screw diameter: 30mm, max. injection weight: 71g, closing force: 273kN, distance between tie bars: 2700x270mm, daylight: 200mm, max. plate distance: 475mm, control: MIRONIC PLUS, operational hours: ca. 90000h.

Injection Moulding Machine KRAUSS MAFFEI 1000-8100 MC


Max. injection pressure: 1778bar, screw diameter: 105mm, max. injection weight: 4137g, closing force: 10000kN, distance between tie bars: 1400x1120mm, daylight: 700-1200mm, max. plate distance: 2400mm, centering diameter: 2500mm, control: MC-4, operational hours: ca. 80000h, including Robot WITTMANN W643-0216: x-travel: 1200mm, y-travel: 2400mm, z-travel: 3500mm, control: CNC6, weight: 740kg.

Vacuum Stuffer FREY F-LINE F220


Hopper content: 250l, output: 4.8t/h, filling pressure: 55bar, filling chamber capacity: 76g, weight: 1.02t.

Work Clock 600 MCM 14 pallets FMS Centers MCM Clock 600 14 pallet in FMS


Year 2001 2 Horizontal machining centers in the FMS FMS consists of 2 MCM CLOCK 600 MP14 pallet changer 14 positions Features of each machine: 500x500 pallet 600x600x700 races rapid 75 m / min Axis continuous B (4th axis) 360,000 pos. HSK63A chuck 15000 rpm Spindle motor 22 Kw torque 214 Nm electro OMLAT CNC Fanuc 16IM 200 tools each machine High adjustable pressure Renishaw tool setting Optical lines pressurized Supervisor jFMX (Windows) manual loading station for robot load point (robot not supplied)
Get the latest machine offers by email: order newsletter