We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Abs. system, extraction system Fabr. Hump Polytechnic YOC 2015 Type Multistar SH-18/6 Air volume approx. 120,000m³ Filter Area 864.8 m² Underpressure with 6 fans each 36 Kw approx. 20,000m³ with frequency converter Discharge with Schneke and Zerladeschleuse with warm air channels with control
used
Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation.
used
specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...
used
Extraction unit, manufacturer: HÖCKER POLYTECHNIK, year of manufacture: 2010, consisting of: 2 purge air filter systems, type Multistar SL18/6, air flow rate 100,000 m³/h, filter area 816.8 m², rotary valve, clean air fan, pipes, purge air filter system, type Multistar SQ 10/5, air flow rate 30,000 m³/h, filter area 288.8 m², rotary valve, clean air fan, piping to outer skin property, without pictured rotary lobe blower KAESER
used
Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm
used
Fan Polytechnik L 300 Masch. No. 82261 Speed 1400 RPM Performance 7200 m3 / h Motor 380, 50 V, 7.5 kW Pressing 215 mm / WS Connection ø 300 mm H x W x d: 1080 x 950 / 1350 x 950 cm Weight 170 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Fan Polytechnik L 200 Connection of 200 mm H x W x D: 650/1150 x 960 x 700 mm Built in 1982 Weight approx. 150 kg Masch. No. 82261 Speed 1400 rpm Leistutng 3410 m3 / h Engine 4 kW Pressing 238 mm / WS The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Description Höcker Polytechnik TSV Chip Extraction
used
There are two identical suction units available, volume flow: 7310m³/h, pipe diameter: 300mm, pressure increase: 2700Pa, rotational speed: 3000/min, length: 2000mm, width: 1300mm, height: 4500mm.
used
Filtration area: 60m², with three collection containers, without material separator.
used
Blower power: 6x 37kW, total volume flow: 120,000m³/h, length: 3970mm, width: 2880mm, height: 8760mm, with documentation, has been regularly serviced, on-site inspection is possible.
used
Used briquetting press Manufacturer: Höcker Polytechnik Type: C30-12 Year of construction: 02/2003 specifications: Pressing capacity: up to approx. 30 kg/h (depending on material) Hydraulic motor power: 3.0 kW VBriquette diameter: 65 mm Residual moisture: max. 18 % Operating time (without cooler) max. 6-7 h Operating pressure: max. 180 bar Operating temperature hydraulic oil max. 60°C Working environment +5°C to +35 °C Machine weight: approx. 760 kg Container capacity: approx. 0.8 m³ Gearbox agitator: 0.37 kW Space requirement: 1,350 x 1,510 x 1,300 mm (L x W x H) -without pedestal Platform dimensions: 2,350 x 2,550 mm
used
Diameter: 250 mm Total length: 2500 mm : Nadelfilz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985
used
HÖCKER POLYTECHNIK PHSS 1500 single shaft EPS grinding machine Styrofoam grinding machine WITH EXTRACTOR VACUUM SYSTEM HÖCKER POLYTECHNIK second-hand German-made 7.5 kW EPS grinder. Functional machine in good technical condition. Manufacturer: HÖCKER POLYTECHNIK Model: PHSS 1500 Year: 2001/05 Condition: used machine in working condition; Electric motor power: 7.5 kW Number of axles: 1 Shaft length: 1500 mm Hopper loading: yes Sieve: none Control Panel: yes Emergency button: yes Dimensions: 3100 x 900 x 2200 mm Weight: approx. 1000 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.
used
Hump shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Material: Punching Waste, Cardboard Punching Mesh, Corrugated Cardboard
used
Key data: 160 mm, 3 kW, 2050 m³/h
Brand: Höcker Polytechnik Type: VacuMobil EA 160A Intake manifolds: ø160 mm Length: 1,300 mm Width: 900 mm Height: 1,900 mm Capacity: 2050 m³/h Pressure: 2,580 Pa Motor: 3kW Cleaning: included Filter area: 9.2m2
used
Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used
new
The IQ control keeps the set air flow the same during runtime. MA-201030 Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 850 m³/h - the dimensions are 1197 mm x 600 mm x 790mm (HxLxW) - Weight 140 kg - Noise level less than 61 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes
new
Suction AD-Oracle IQ from Bofa - New : The IQ control keeps the set air flow the same during runtime. Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) - Weight 68 kg - Noise level less than 60 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes
new
Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke
used
Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust air connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - pocket filter- Maintenance flap for filter change - Centrifugal fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg very good condition; used
used
Filter system - extraction system, central extraction cartridges - pulse filter VALCO type Pidclean 4N Central welding fume extraction series. No.: 15003 Year of construction: 2003 Flow rate max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Extraction connection at the filter inlet 250 mm Exhaust air connection at the filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz - Filter control AUTEL, type Eco S6 - pneumatic filter cleaning, automatic via control- 4 pieces cartridge filter 350 x 660 mm- Maintenance flap for filter change - Centrifugal fan on top of the system - Attachable dirt collection container approx. 40 liters - Silencer for fan outlet, 250 mm- Electrical diagram and operating instructions for the control available Space requirements L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg good c ...
new
Tischgroess: 940 x 640 mm height: 800 mm flow rate maximum: 2500 m³/h power: 0.35 kW (0.5 HP) voltage: 230 V / 50 Hz weight: 95 kg
new
Air power: 2520 m ³/h filter surface: 1,45 m² maximum vacuum: 1800 PA suction connection Ø: 1 x 130 / 2 x 100 mm chip bag contents: 300 l Leerlaufdrehzah: 2950 RPM sound pressure: 87.1 dB S1 motor power output 100%: 1.5 kW (2.0 HP) engine power S6 40%: 2.1 (2.8 kW) voltage: 400 V / 50 Hz machine dimensions (W x D x H): 860 x 670 x 2330 mm weight approx.: 40 kg