1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: used
Price: 699 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

Eccentric press ex Center Press Press 15 to pressure power punch Eccentric press with 15 to pressure performance more data: see data plate (last image) The clamped tool is not. A pneumatic control unit must be installed (not present), or again Dismantling the pneumatics on tripping over linkage. Was to test the compressed air cylinder pressurized. the mechanism is triggered and the machine stamped perfectly! State and execution: see images more

New in: 2000
Price: used machinery auction RESALE 6.000 €
Location: Land-de DE Germany, 75397 Simmozheim
Seller: Surplex GmbH

Weight approx.: 3000 kg x-travel: 350 mm y-travel: 250 mm control: ASTROMATIC Dimensions (l x w x h) approx.: 2500 x 1400 x 2500 mm z-travel: 350 mm Description: AGIE AGIETRON COMPACT 2 CNC Die Sinking EDM - total connected load: 6 kVA - max. table load: 400 kg - with tool changer ASTRO, 56 places - workpiece dimensions: max. diameter of 130 mm, height 179 mm (incl. pallet) - workpiece weight incl. pallet: 120 kg - travels of tool changer X/Z: 1050/110 mm - pneumatic connection: 6-7 bar - dimensions of tool changer: 1650 x 1700 x 2250 mm - weight of tool changer: approx. 950 kg - with documentation more

New in: 2008
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: Blade dimensions - vertically 550 x 4.4 x 50 mm positive -horizontal 500 x 4.4 x 40 mm positive -Notching range 90 ° in approx. H 210 x H 190 x W 180 mm -vertical saw blade 45 ° to the outside + 60 ° female swivel -horizontal blade 60 ° after top and 55 ° down swivel -Miter gauge of the profile support 60 ° to the left + right adjustable -sliding material support table -Pneumatic clamping thickness -pneumatic coolant spray -2 blades -Air Connection 6 bar -Drive 400 V / 2 x 3 kW / 2800 RPM -Space requirement approx. B 1600 x H 1500 x H 1100 mm -Weight approx. 1300 kg more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

ok for assembling with a silo system\r\ninput from the silo d 300 mm\r\ninput clap pneumatic controlled\r\n more

New in: used
Price: 2.450 €
Location: Land-nl NL Enschede
Seller: DutchMach

TUGRA ALU - COLD SAWS TYPE AC-400 -Zaagblad 400 mm -Verstek Dubbel -2 pneumatic clamp -Nevelsmeerssysteem -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border) more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

saw blade diameter: 400 x 50 mm turning speeds: 3000 U/min : 100 x 110 mm : 250 x 85 mm capacity 90 degrees: round: 130 mm : 110 x 110 mm Capacity 45° rectangular: 160 x 70 mm : 115 / mass. 90 mm work height max.: 970 mm total power requirement: 1,5 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 900 x 1000 x 1480 mm DESCRIPTION Automatic mitre cutting-off machine for Alumininium / pvc and light metals, with Ø400 TCT ascending blade saw. Easy clamping to 450 / 900 / -450 cutting degrees. CHARACTERISTICS THREE PHASE MOTOR 400Ø Tungsten Carbide TCT saw included / 45° / 90°/ -45° / -60° Lockable degrees and intermediate angles Two Pneumatic vertical and horizontal  ... more

New in: 2018
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

Through the use of a fast-rotating turbine mill allows the processing of cables of all kinds. The turbine mill ensures a homogeneous shredding of the cable material and provides the "supply recorded" fine strands. Processed are aluminum/copper cable eg. budget cable, wires and fine stranded cable, hard cable... To eliminate cables with following ingredients are: Oils, bituminous substances, soft rubber and gel-containing cables. As a result, the combined supplies pure end granules. System components: (1) granulator for pre-cutting (2) turbine mill for fine crushing and processing recorded (3) pneumatic transport system (4) separator for separating materia ... more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with CNC spindles ... Technical data summary (possibly additionally included accessories please inquire) ... Cut saw ... Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pcs. Spindle speed: 3000-6000 rpm Spindle diameter: 40 mm Tool diameter max .: 400 mm Motor power: 3 kW Adjustment radial pneumatically controlled 8 positions e.g. for edge rounding from above Laser straightening light for detecting the sawing section rounding unit ... Position: horizontally below Motor power: 1.5 kW Spindle diameter: 20 mm Spindle speed: 9000 rpm Tool circle max .: 130 mm  ... more

New in: used
Price: request quote
Location: Land-de DE
Seller: MPS Frank Müller

Circular saw with vise Manufacturer: Berg & Schmidt Type: VKS, 315 Roller 7 m,. Length measuring system, MITRE 60° Li, 45° re; Digital measuring system, Coolmatic spraying system, pneumatic exciting vise Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 7500x2000x4120 mm weight: 5000 kg S + S frame press - fully automatic model Super -------------------------------------------------- -------------- CE version The only self-transforming high performance frame press fully automatic, where the woods no longer need to be pre-plugged. The width and height adjustment is achieved by inserting the workpieces directly in the pressing area, without loss of time, accomplished. The frame press machine of the superclass. Basic machine in strongest frame welded construction, from oversized, thick wall special profiles. Guideways for pressure beams and sliding sl ... more

New in: 1985
Price: request quote
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

material width 160 - 870 mm material thickness 0,20 - 3,00 mm daylight width 900 mm tensile strength 450 N/mm² strip width min. 8,00 mm coil weight max. 8,00 t coil inside diameter 400 - 508 - 750 mm coil outside diameter 1.500 mm knife shaft diameter 160 mm blade diameter 300 mm cutting speed 120 m / min working direction left - right line consisting of: coil car construction l - type over floor decoiler with press roll capacity max. 8,0 t coil inside diameter 508 mm coil outside diameter 1.500 mm infeed table infeed unit with press roll infeed and centering unit to the slitting shear slitting shear scrap winder roll saddle with separator rolls pad / felt brake uni ... more

New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. total power requirement: kw Dimensions (L/W/H): mm weight of the machine ca.: kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool  ... more

New in: 2008
Price: 21.000 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Positioning range X-axis: 2500 mm Positioning range y axis: 350 mm Positioning range Z axis: 280 mm Max machining length 2500 mm Spindle speed: 1 RPM 18000 Light barrier 4 horizontal pneumatic material clamps spraying device Only 252 spindle hours more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180 2x120 mm Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Dir ... more

New in: used
Price: 2.150 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Pneumatic corner connection press with various cutting blades more

New in: 2003
Price: used machinery auction RESALE 11.000 €
Location: Land-no NO Norway, 4360 Varhaug
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 2500 x 2500 mm setting measure approx (l x w x h): 8000 x 2500 x 2500 mm Description: -BIESSE Rover XL CNC Machining Center with 2 Operating Units / Spindles- machine configuration: - XL2 - Rover 24 ATS ATS PANEL SUPPORTS: Belt conveyor for chips removal, Digital display on panel support, Vacuum module for ATS work table. Dimensions 132 x 146 x 29 mm, Prearrangement for pneumatic locking devices on the sliding supports of the ATS work table, Uniclamp module. For piece thickness from 40 to 98 mm. OPERATING UNITS: -1. Spindle 7.5 kW (10.2 Hp)/12000 Rpm electrospindle with long flange - HSK F63 -2. Spindle 7,5 kW (10,2 Hp)/1 ... more

New in: 1996
Price: 13.500 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Maximum cutting length: 6,000 mm Maximum blade diameter: 550 mm Auto. Positioning via E 255 control Digital angle display (2 x pan, tilt 2 x) Roller conveyor travelling with Pneumatically collapsible material support arms more

New in: 2008
Price: used machinery auction RESALE 47.000 €
Location: Land-no NO Norway, 4360 Varhaug
Seller: Surplex GmbH

serial number: 57430 Weight approx.: 7200 kg Dimensions (l x w x h) approx.: 8000 x 2500 x 2500 mm setting measure approx (l x w x h): 8000 x 2500 x 2500 mm working length x-axis: 6200 mm working width y-axis: 1535 mm working height y-axis: ca. 250 mm total power approx: 35,7 KW Description: BIESSE Rover C6.65 CNC-Machining Center with EPS table and 2 electrospidels -5 axis Electrospindle 12 kW (16.1 HP) with HSK F63 adaptor -3 axis Electrospindle 12 kW (16.1 HP) with HSK F63 adaptor, air cooled -HSK F63 Aggregate for sawblade unit with max. dia. 270 mm - Working fields -configuration 2: X = 6200 mm, Y = 1535 mm, Z = 250 mm -CE Safety devices -Multizone - 10 panel supports and 40 bas ... more

New in: used
Price: request quote
Location: Land-de DE 58119 Hagen, Obernahmerstr. 74
Seller: Reinhold Schmitt GmbH

construction: support segment - system year of construction 1980/2018 material width 280 mm coil weight 2,00 t coil inner diameter 420-520 mm machine weight approx. 0,80 t space requirement approx. 1,50 x 1,70 x 2,00 m mandrel NEW (2018) construction 4-segment system segment length 280 (300) mm expanding range 420-520 mm circular blank NEW (2018) circrular blank - ø 1.700 mm height floor - middle mandrel shaft approx. 850 mm brake system: disk brake - pneumatically hydraulic unit not available more

New in: 2005
Price: used machinery auction RESALE 16.000 €
Location: Land-no NO Norway, 4360 Varhaug
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 2500 x 2500 mm setting measure approx (l x w x h): 8000 x 2500 x 2500 mm Description: -BIESSE Rover XL CNC Machining Center with 2 Operating Units / Spindles- BASIC MACHINES - ROVER SERIES -Rover 24 XL, Numerically controlled machining center, Working fields: Configuration 1-2: X = 6170 mm, Y = 1395 mm, Z = 180 mm Automatic lubrication system. ATS PANEL SUPPORTS FOR ROVER 24 -10 ATS panel supports - 30 sliding supports for vacuum modules - 10 stops - 2 side stops PIECE REFERENCES -Additional work station at 750 mm (655 mm for EPS panel supports) from the back stops, for a machine with 10 panel supports. -2 Additional ... more

New in: 2001
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Punch laser combination machine Make: Trump card Type: TRUMATIC 6000L-1600 Year of construction: 2001 Hours of operation: 54.341 h / 12 h 015 Control: Siemens Sinumerik 840 d Laser power: 3200 Watts Punching power: to 22. Work area: 3085 x 1650 mm Maximum sheet thickness: 8 mm Maximum workpiece weight: 230 kg Maximum punching diameter: 76.2 mm Dimensions: Lxwxh = 9100 x 7900 x 2400 mm Weight: 22,500 kg Accuracy: +/-0.10 mm Standard equipment Sturdy C frame Coordinate management with integrated linear magazine Tool places: 17 Clamps: 3 Drives: Maintenance-free three-phase servomotors Programmable presser to set up Sensor-controlled part slides 500 x 500 mm for punch ... more

New in: 2005
Price: used machinery auction RESALE 18.000 €
Location: Land-it IT Italy, 04019 Terracina
Seller: Surplex GmbH

Weight approx.: 15 kg Dimensions (l x w x h) approx.: 400 x 360 x 300 mm Description: Electric machining center for the production of windows and shutters elements. Compositioon Tenoning side End cutting unit with shaft whose Ø is 50 mm and length 620 mm, vertical movement with continuous axis, engine power 9.25 kW at 3200 RPM, tool max Ø 330 mm Anti-splintering system type Jolly zbr>, Head squaring, with shutter automatic inserting Tilting tenon +/-60° Drilling unit Module feeding system with wheels Ø 150 mm, interaxis 109 mm, shaftdrive transmission, engine power 1,1 kW, speed between 2 and 17 Motorized profiling counterguidance with 2 axis, vertical and horizontal concealed. 3 shaft ... more

New in: used
Price: 3.000 €
Location: Land-de DE 91785 Pleinfeld / Ramsberg, Untere Dorfstr. 2
Seller: Lebensmitteltechnik Mayer

Double Clipper tipper tie DCKV 220 90, pneumatic Clipper, with mobile base unit to swivel. Dimensions Lxwxh approx. 75x60x165cm, weight 60kg,. Device as the customer back, very good condition, works perfectly. more

New in: 2001
Price: used machinery auction RESALE 600 €
Location: Land-de DE Germany, 88630 Pfullendorf
Seller: Surplex GmbH

Weight approx.: 159 kg Dimensions (l x w x h) approx.: 610 x 880 x 1300 mm Description: BERG & SCHMID VELOX 350 Precision Aluminium Chop Saw - serial no.: 014199005 - saw blades up to a diameter of: 350 mm - mitre left- and right sided: 45° - with pneumatic double clamping device: 2 - 6 bar cutting range angle 90°/saw blade diameter 350 mm: - round: 120 mm - square: 105 x 105 mm - rectangle: 200 x 80 mm cutting range angle 45°/saw blade diameter 350 mm: - round: 115 mm - square: 100 x 100 mm - rectangle: 150 x 80 mm cutting range angle 45° vertical/saw blade diameter 350 mm: - round: 65 mm - square: 60 x 60 mm - rectangle: 180 x 50 mm - with COOLMATIC micro spraying system 24 V/AC inc ... more

New in: 2003
Price: request quote
Location: Land-at AT 3241 Kirnberg an der Mank, Am Holzweg 9
Seller: HZB-Maschinenhandel Maschinenteufel

) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window more

New in: 2001
Price: used machinery auction RESALE 1.200 €
Location: Land-de DE Germany, 88630 Pfullendorf
Seller: Surplex GmbH

Weight approx.: 159 kg Dimensions (l x w x h) approx.: 880 x 610 x 1300 mm Description: BERG & SCHMID VELOX 350 Precision Aluminium Chop Saw - saw blades up to a diameter of: 350 mm - mitre left- and right sided: 45° - with pneumatic double clamping device: 2 - 6 bar cutting range angle 90°/saw blade diameter 350 mm: - round: 120 mm - square: 105 x 105 mm - rectangle: 200 x 80 mm cutting range angle 45°/saw blade diameter 350 mm: - round: 115 mm - square: 100 x 100 mm - rectangle: 150 x 80 mm cutting range angle 45° vertical/saw blade diameter 350 mm: - round: 65 mm - square: 60 x 60 mm - rectangle: 180 x 50 mm - with COOLMATIC micro spraying system 24 V/AC incl. spraying head and hol ... more

New in: 1990
Price: request quote
Location: Land-uk UK Thornton, Hillhouse Business Park
Seller: Euro Rubber Lines

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injec ... more

New in: 1997
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: IMA \r\nType: COMPACT/PC/F/DV/6220\r\nYear: 1997\r\nLeft hand version\r\n\r\nWith liftback-return for the single-man-operation\r\n\r\nTechnical data:\r\n\r\nEdge material:\r\n- Veneer-, coil- and strip ware\r\n- Plastic-, coil- and strip ware\r\n- Massive wood slats\r\n\r\nEdge height: min. approx. 14mm, max. approx. 55mm\r\nEdge thickness: min. approx. 0,4mm, max approx. 20mm\r\n\r\nPanel thickness: min. approx. 10mm, max. approx. 50mm\r\nPanel width: min. approx. 85mm (60mm)\r\nPanel length: min. approx. 150mm\r\nSlats: max. approx. 20x55mm\r\n\r\nPanel overhang out of the chain track: approx. 35mm\r\n\r\nDrive for throughfeed speed of approx. 8- ... more

New in: 1999
Price: request quote
Location: Land-pl PL
Seller: TDMW.PL Igor Kaliniec

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available more

New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

pneumatic Bench table Capping Machine. Working pressure: 3 - 6MPa. Weight about 15kg ID5350 more

New in: 1990
Price: request quote
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Procedures: X = 190 mm, Z = 225 mm Turning diameter: 190 mm Turning length: 180 mm Tip height: 130 mm Speed range: 50-6000 RPM Procedures: X = 190 mm, Z = 225 mm WZ record: VDI 20 WZ-revolver: 8-speed Bar passage: 24 mm Tailstock: pneumatic Weight: 1600 kg Dimensions: L x W x H = 1750 x 1700 x 1650 mm Year of construction: 1990 Function is not tested! more

New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Halbautomatischer Schraubverschlieáer mit Druckluft ID5081 more

New in: used
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Saw blade diameter 420 mm -See diagram below cutting area -Tilt range pneumatic, with digital display 90 - 45 ° - Swivel range on both sides manually with digital display 22.5 ° -Blade speed 2250 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air connection 4 bar -Space requirement approx. B 1500 x H 1900 X 1600 mm -Weight approx. 700 kg -Evacuation roller conveyor with stop via Handwheel + digital display 6000 mm -Feed roller 5000 mm more

New in: 2014
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Capacity: -22.000 cph based on 500 ml and 330 ml beer -11.000 cph based on 950 ml beer 1. Can rinser 2. Can filler 3. Can seamer 4. Lid supply 5. Tunnel pasteurizer 6. Shrinkwrapping machine 7. Can conveyors 1. CAN RINSER No. of lines 3 No. of rinsing zones 1-channel version 2. CAN FILLER Capacity 22.000 cph based on 500 ml and 330 ml 11.000 cph based on 950 ml Container can No. Of filling valves 45 pcs Pitch 150,8 mm Filling valves version electro-pneumatically controlled valves Filling system volumetric 3. CAN SEAMER Mechanicall speed 24.000 cph No. of seaming heads 4 pcs Pitch 150,8 mm 4. LID SUPPLY Technical specification can rinser, type: Lids 202 (for 330 ml and 500 ml) 300 (fo ... more

New in: 1999
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Saw blade diameter 420 mm -See diagram below cutting area -Tilt range pneumatic, with digital display 90 - 45 ° - Swivel range on both sides manually with digital display 22.5 ° -Blade speed 2250 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air connection 4 bar -Space requirement approx. B 1500 x H 1900 X 1600 mm -Weight approx. 700 kg -Evacuation roller conveyor with stop via Handwheel + digital display 6000 mm -Feed roller 4000 mm more

New in: 2015
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Was used for line performance about 12,000 bph. Higher performance is possible. Various 0.7 - 1.0 liter glass bottles for sparkling wine and wine with natural cork, polystop, longcap Closure and aluminum screw cap Control unit PRO -Color display 21 as a touch screen -Industrial PC, INTEL Multicore 3.8 GHz -Form-fitting stainless steel housing IP 65 -Working speed 12.000 bottles / hour. More then 20.000 bph is possible. -Easy to use menu navigation Remote maintenance connectable Level measuring bridge X-ray -under-filling -shapely stainless steel housing -Protection class IP 65 -Height adjustment via handwheel -Closure control optical or inductive Level measuring bridge X-ray -over-filling ... more

New in: used
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

ROTO T 2/96 THE ROTARY AUTOMATIC MOLDING MACHINE ON 96 STATIONS FOR CASTING OF POLYMERIC TRAFFIC JAMS OF THE MADE FOAM STRUCTURE (FOR WINES AND FOR HARD ALCOHOLIC BEVERAGES), CAPABLE TO WORK AT THE SAME TIME WITH 2 VARIOUS MATERIALS / COLORS Eqb8ve2 Main technical characteristics â?¢ A rotary table with 48 workstations in two levels, everyone with a double holder â?¢ holders with linear + rotary pneumatic opening / closing, calculated on 96 single compression Arnold from stainless steel, with a possibility of easy replacement. â?¢ Electric drives of rotation of screws with inverter; â?¢ 2 independent knots of injection, transfer system; &ac ... more

New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Halbautomatischer Schraubverschlieáer mit Druckluft ID5295 more

New in: used
Price: 110 €
Location: Land-de DE 92331 Parsberg, Dr.-Nardini-Str. 11
Seller: Wensauer-Edelstahl-Vertrieb-UG

Double-acting pneumatic cylinder more

New in: 2006
Price: used machinery auction RESALE 2.490 €
Location: Land-bg BG Bulgaria, 3000 Vratsa
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1350 x 700 x 1220 mm Description: PRESSTA EISELE Aluma NOVA 4 M3P Glazing Bead Saw serial number: 130/06 year of manufacture: 2006 type: NOVA 4 M3P techincal details: - rotation speed: 7800 U/min - hacksaw blade diameter approx.: 200 mm - measurement via digital display max.: 2650 mm - possible to memorize 10 diffrent measurements - work area min.: 150 mm - work area max.: 3000 mm - connection pressure: 6 - 8 bar - connection: 230 V - frequency: 50 Hz - bar dimension max.: 60 x 39 mm discription: - safe machine control - frequency controlled motor speed - independent milling spindle - easy adjustment of milling depth at cutter ... more

New in: used
Price: 180 €
Location: Land-de DE 92331 Parsberg, Dr.-Nardini-Str. 11
Seller: Wensauer-Edelstahl-Vertrieb-UG

Pneumatic hinge clamp 8 bar, 24 volt, mint more

New in: used
Price: used machinery auction RESALE 150 €
Location: Land-ch CH Switzerland, 1800 Bex
Seller: Surplex GmbH

Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 3500 x 800 x 1200 mm Description: suitable for lot 114, with 3 support trestles at one time horizontally movable approx. 850 mm, the 3 blocks vertical pneumatically adjustable approx. 200 mm, rollers support surface approx. each 445 mm, distance between rollers approx. 500 x 240 mm more

New in: 2008
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Go 2017 5 axes Control system: Fanuc Series 18i-TB Number of spindles: 2 X: 70 mm Maximum workpiece diameter: 38 mm Spindle speed: 8000 rpm Machine dimensions: 2711 x 1468 x 1793 mm Machine weight: 4050 kg Accessories: 4 driven tools Tools Collet (pneumatic) Bar Feeder IEMCA Transformer Without internal cooling Without suction No emulsion Availability: 01.02. 2019 more

New in: 2001
Price: used machinery auction RESALE 8.000 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 8000 kg control: NC21 Dimensions (l x w x h) approx.: 13500 x 2500 x 2700 mm feed: 10 - 40 m/min edge thickness: 0,4 - 1,5 mm workpiece thickness: 8 - 40 mm gluing unit: QE34 snipping unit: WK35 fine trimming unit: ja / yes edge buffing unit: ja / yes refeed system: ja / yes edge magazine with: 2 -fold roller workpiece overhang: 40 mm Description: Special HOMAG PROFI KFL 10/20/QE/S folding edge banding machine e.g. for drawer front parts.<,/ b>, - Machine number 0-202-21-4655 - Small parts magazine - Standard trimming unit pneumatic control 4.5 KW - Standard trimming unit pneumatic control 4.5 KW - Standard trimming unit pneumatic control 4.5 KW - Standard trimming unit  ... more

New in: 2007
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Go 2017 5 axes Control system: Fanuc series 18i-TB Maximum workpiece diameter: 32 mm Maximum workpiece length: 320 mm Bar feeder length: 3000 mm Spindle speed: 8000 rpm Machine dimensions: 3750 x 2370 mm Machine weight: 4050 kg Accessories: 4 driven tools Tools Collet (pneumatic) Bar Feeder IEMCA Transformer Without internal cooling Without suction No emulsion Availability: 01.02. 2019 more

New in: used
Price: 35 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: used
Price: 14.100 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Maximum cutting length: 6,000 mm Maximum blade diameter: 550 mm Car. Positioning of E 500 5 axes control (Pan, tilt and position) Roller conveyor travelling with Pneumatically collapsible material support arms Location close to Stuttgart more

New in: used
Price: 55 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
New in: used
Price: request quote
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0460 Brand: VALENTINI MACCHINE Model: C 1 P - CE Standard Vertical clamp press for drawers, wooden elements , strip panels - CE Standard Technical data: Table dimensions mm 2000 x 1200 N° 4 Pneumatic pistons with position adjustment Squaring device Working pressure 6-8 atm Power of each cylinder 6-8 Atm Kg 586-790 Overall dimensions: mm 2000 x 1100 x 1800 h Weight kg 500 more

New in: used
Price: 145 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: