We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
No. 5197: 1 Gebr. Cycles Lathe Fabr. PINACHO, type Mustang 200, Bauj. 2001
used
Ref. No. 00789 Description of the system: Cycle-controlled lathe Manufacturer: Pinacho (Metosa) Model MUSTANG 225 Year of construction 2000 Technical data CNC control FAGOR 8055 TC Center height 225mm Center width 1000mm 8-speed turret VDI 30 Accessories Fixed bezel Three-jaw chuck Soft CNC 3.06 Energized condition Stainless steel parts are currently being machined Axles ok Rotate fits on it Small drawback: Revolver swivels like on the video In this case, counterclockwise, which is also the direction that still works, which is also accurate to change – in the other direction, the turret has an offset, from the technician it was said that it would not be worth repairing it But it can be replaced or repaired. Machine is running and is currently in operation. A viewing can be arranged at any time. Submission date: Immediately after arrangement ...
used
Key data: 450 mm, 1500 mm
Machine Details Stock-No. 1105-03977 Type of machine Lathe - cycle-controlled Make PINACHO Type Smart turn 8 225 Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Spain Delivery time immediately Freight basis ex works Technical details turning diameter 450 mm turning length 1500 mm control FAGOR TC 8055 total power requirement 15 kW weight of the machine approx. 3 t dimensions of the machine approx. 2.29X1 X 1.2 m Additional information TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make ...
used
Description: Center height: 260 mm Distance between centers: 1500 mm Turning diameter over bed: 530 mm Diameter over longitudinal slide: 475 mm Turning diameter over cross slide: 315 mm Bed width: 350 mm Main spindle bore STD = 80 mm Spindle holder: DIN55027 N.8 Morse taper of the main spindle: MK5 Constant cutting speed diameter 80 mm: Stage 1: 0 - 564 rpm Speed 2: 564 - 2500 rpm Feed rates: Z, X: 0 - 10000 mm/min Rapid traverse Z, X: 10 m/min Quill diameter: 82 mm Quill travel: 235 mm Morse taper in the quill: MK5 Power of the main motor: 11 kW With technical documentation as shown in the pictures Control: GE FANUC Series 0i Mate-TC Approx. Onsite Dimension. (l x w x h): 3,300 x 1,450 x 1,850 mm, weight approx.: 3,300 kg
used
Key data: 530 mm, 3000 mm
Turning length: 3000 mm Rotation diameter: 530 mm above bed / 315 mm over cross slide Control: Fagor 8055 Spindle speed: 2,000 rpm min. max. Spindle bore: 105 mm Tool turret: 8 positions Equipped with: - 2 fixed bezels - 1 moving bezel Country of origin: Spain Engine power: 11 kW Machine weight: 4000 kg Machine LxWxH: 4000 x 1700 x 1800 mm
new
turning diameter:402 mm turning length:750 mm control:FAGOR 8037 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2000x1115x1670 (LxBxH) mm turret:8 fach CNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents
new
turning diameter:402 mm turning length:1000 mm control: 8055 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2250x1115x1670 (LxBxH) mm turret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents
used
turning diameter:620 mm turning length:2.000 mm turret (x-stations):8 tool taper:VDI 40 turning diameter over bed slide:415 mm control:8055 TC FAGOR spindle bore:80 mm rapid power traverse in X-and Z direction:10 m/min speeds:0-650 / 650-2.500 1/min total power requirement:28 kVA weight of the machine ca.:3,6 t dimensions of the machine ca.:4,6 x 2 x 1,8 m teach-in lathe with tailstock MT 5, 8-hole turret, 3 jaw-chuck
used
Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...
Type: Smart Turn 5/260 Swing over bed: 560 mm Swing over cross-slide: 315 mm Distance centre tot centre: 3000 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm
used
Center height: 225 mm Center distance: 1150 mm Spindle bore: 65 mm CNC Brand: Fagor CNC Model: 8055 PINACHO - MUSTANG 225 Cycle Teach-In lathe 450 x 1150 mm MACH - ID 6349 Make: PINACHO Type: MUSTANG 225 Control: Fagor 8055 YOP: 2004 Swing over bed Ø 450 mm Swing over cross slide Ø 260 mm DBC Turning Length 1.150 mm Spindle bore 65 mm Spindle power 8 kW Bed width 300 mm Tailstock spindle Ø 58 Ø Stroke pinole 115 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 7.000 mm Feed rate Z-Axis 7.000 mm Dimensions Length 3.400 mm Width 1.800 ...
used
Center height: 165 mm Center distance: 750 mm Spindle bore: 58 mm CNC Brand: Fanuc CNC Model: Oi Mate MACH-id 5214 MAKE Pinacho Spain TYPE SMART 6 YOP 2009 SPECIFICATIONS Max. turning diamter Ø 335 mm DBC Turning length 750 mm X-Axis 700 mm Y-Axis 250 mm Spindle bore 58 mm Main Spindle speed 4000 Rpm Control FANUC Oi MATE - TC Hours 700 H DIMENSIONS Length 2100 mm Width 1400 mm Height 1600 mm
used
Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Swing over cross-slide: 198 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 42 mm Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm Command: Heidenhain Length: 2870 mm Width: 1510 mm Height: 1550 mm Weight: 1,5 ton
used
Equipped with SK-kit: - auto toolchanger 8 positions - VDI-type - hydraulic chuck - hydraulic counter-point - hydraulic center Swing over bed: 620 mm Swing over cross-slide: 580 mm Distance centre tot centre: 2000 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm Command: Fanuc Toolchanger: yes Number of tools: 8 positions
used
Type: S90/285-155 double chuck lathe! Distance between centers: 2000 mm Swing over bed: 830 mm Swing over cross-slide: 525 mm Diametre of main spindle bore: 155 mm Power on main spindle: 7,5 kW Number of speeds: 12 > 750 rpm Digital screen: yes Length: 3100 mm Width : 1000 mm Height: 1800 mm Weight: 3 ton
used
Pinacho S90-310 lathe. Distance between centers: 1.625mm. Swing: 620mm. Swing over carriage: 425mm. Swing in gap: 880mm. Bore: 80mm. 12 speeds: 30-1500rpm. Motor power: 7,5cv. Equipped with chuck. Equipped with DRO Heidenhain. CE.
used
turning diameter: 520 mm turning length: 1625 mm control: FAGOR 800 TG greates pass round over bed: 530 mm swing diameter over slide rest: 475 mm centre height: 260 mm bed width: 350 mm main spindle bore: 68 mm turning speeds: 1500 U/min rapid traverse: 5 m/min Drive: 10 kW total power requirement: kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,8x1,4x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Distance between centers: 1650 mm Centers height: 225 mm Max swing over bed: 440 mm Swing over cross slide: 260 mm Swing over gap: 640 mm Spindle hole diameter: 52 mm Gap length: 160 mm Spindle speeds: 12, 32-1800 rpm Motor power: 5.5 CV Equipped with: 3-jaw universal chuck: Ø 250 mm Set of jaws: 1
used
Distance between centers: 1650 mm Centers height: 225 mm Max swing over bed: 440 mm Swing over cross slide: 260 mm Swing over gap: 640 mm Spindle hole diameter: 52 mm Gap length: 160 mm Spindle speeds: 12, 32-1800 rpm Motor power: 5.5 CV Equipped with: 3-jaw universal chuck: Ø 250 mm Set of jaws: 1
used
- First ownership: from own use and first hand - Center height: 180 mm - Center width: 1000 mm - Diameter over bed: 360 mm - Bed width: 250 mm - Diameter of the main spindle: 42 mm - Control: Fagor 8055 TC - Constant cutting speed: 100-4000 rpm - Working feed Z.X: 0-7000 mm/min - Rapid traverse Z.X: 10 m/min - Main engine 5.5 kW
used
Very good condition Control type Siemens Sinumerik workable length 1.500 mm Turning diameter on carriage Ø 500 mm Max bar passage Ø 78 mm Spindle diameter Ø 250 mm Spindle speed 2,000 rpm Spindle power 22 Kw Spindle type ASA 8 Duplomatic tool station 8 positions Chip Evacuator Accessories
used
Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm
used
turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 200 mm turning speeds: 30 - 2000 U/min spindle bore: 42 mm quill stroke: 150 mm tailstock quill taper MT: 3 total power requirement: 2,5 kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 2200 x 850 x 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
FAGOR 8055TM CNC Description: - Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. In 2021 a retrofitting was carried out. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts
used
- Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts