We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Used Spiralkneter PIETRO BERTO, type: easy120 - for 120kg of dough - 2 speeds - 1 boiler speed -Schüsselvolumen-203 litres -Bowl diameter: 800 mm -Course mixing arm: 101 / 202 RPM. -Boiler speed: 11 RPM. -El. Connection: 3 x 400 V, 50 Hz, 6.8 kW, 16A -Weight: 568 kg The dough tool is located in a very good condition of the bakery. Inspection and test run are possible by arrangement like. Last machine in stock!
used
Used spiral mixer PIETRO BERTO, type: easy 120 E -in bakery condition- - with extendable boilers - for 120kg dough - 2 speeds - 1 boiler speed - Incl. 3 tank wagons - Bowl volume: 203 litres - Bowl diameter: 800 mm - Gears kneading arm: 101 / 202 rpm. - Boiler speed: 11 rpm.
used
Used Stikken ovens PIETRO BERTO, Type: PBR H5/E-18 -In bakery condition - with gas burner - 3 ovens available - Sheets for baguette and 3-edge perforated sheets also available Visit and test run on request.
used
Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton
used
WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle Paper band filtration unit Good condition High accuracies Under power for inspection Available immediately WE CAN ORGANIZE FOR CLIENTS AS WELL TRANSPORT OF MACHINE TO THEIR LO ...
new
CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.
new
CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.
used
Schutte SD50 multi spindle lathe loader. Machine purchased used by bankruptcy and never used by us. Perfect because he worked only a few years. Purchase in the state in which it is located as we know nothing for any problems never having it turned on. Visibly it is perfect and almost new.
used
faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
for Schütte SF 32, Country of origin: Italy, Number of spindles: 6
used
faceplate diameter: 1250 mm swing diameter: 1600 mm turning height: 1000 mm faceplate diameter: 1250 mm grinding diameter: 00 mm grinding height: 1000 mm control: Siemens 840 C total power requirement: 60 kW weight of the machine ca.: 47 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Wickman 5/8 + Barloader Pietro Cucchi PB20 The machine is located in Spain.
used
Single-spindle bar feeder. control panel ePalm10 max. material length: 3,300 mm max. material diameter: 52 mm feeder width 830 mm feeder length 4,650 mm weight 1,500 kg Centering inserts can be purchased for the feeder: 28.5 mm 35 mm 38.1 mm 48 mm and clamping mandrels for diameters: 38 mm 31.9 mm 25.7 mm
used
with 12 closing heads for top caps (Piccolo plastic caps) running direction: left - right
used
Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw capping machine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work
used
• Corker BERTOLASO DELTA 809 R/S: • Year: 2012 • Producer: BERTOLASO • Speed (BPH): 15.000 bph • Direction: Clockwise • Used corker BERTOLASO composed of: • Model: DELTA 809 R/S. • 9 capping heads: o Natural straight cork. o Mushroom cork. • Safety protections. • Code X 242
used
• Corker BERTOLASO single head • Year: 1994 • Producer: BERTOLASO • Speed (BPH): 3.000 bph • Direction: Clockwise • Cap: - Natural straight cork - Mushroom cork. • Pre-evacuation before capping. • Safety protections. • Code X 105
used
• Corker BERTOLASO mod. SUPER GLORIA 110, single head – natural straight cork: • Year: 1992 • Producer: BERTOLASO • Speed (BPH): 2.500 bph • Direction: Counterclockwise • Complete with some cylindrical bottle formats. • Dimensions: 1100mm x 1000mm x H 2400. • Weight 500 kg • Code X 97
used
• Corker BERTOLASO mod. DELTA 406: • Year: 1993 • Producer: BERTOLASO • Speed (BPH): 9.000 bph • Direction: Clockwise • Natural straight cork. • Vacuum device before closing. • Variable height head • Stainless steel basement. • Safety protections. • Variable production speed. • Code X 82
used
• Corker BERTOLASO mod. VA for screw cap: • Producer: BERTOLASO • Speed (BPH): 8.000 bph • Direction: Clockwise • Screw aluminum cap • Cap: 31,5 x 18. • Capper 4 heads • Code X 73
used
• Corker BERTOLASO mod. DELTA 404 – 7.000 bph: • Year: 1986 • Producer: BERTOLASO • Speed (BPH): 7.000 bph • Direction: Clockwise • 4 capping Heads. • Suitable for naturla straight cork. • Safety protections. • Code X5
used
• Corker BERTOLASO 4T: • Year: 1982 • Producer: BERTOLASO • Speed (BPH): 7.000 bph • Direction: Clockwise • Used corker BERTOLASO composed of: • Model: DELTA 404. • 4 corking heads for flat cork. • Coclea for input bottle. • Many format available. • Safety protections. • Code X 1
used
Screw cappers Bertolaso / Ítalien Type Sigma 603/3 6,000 bph Shutter MCA 28 Ali 3 Head Bottles: 0,33 + 0,50 glass Year of construction 1994
used
1 x 6 Naturkorker Bertolaso, type: Delta 506R, 1994, li-re, performance: approx. 8,000 bottles / h, format parts: 1.0 ltr.,. Price: 7.900,-plus VAT from stock Dolgesheim
used
Manufacturer: Bertolaso Model: Olimpia 32 Year: 1985 Speed = 3500 bottles/h Equipment in Working Conditions Safety Systems: Yes Technical Documentation: Available