We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manual Pipe Bender Fabr. PERTHEL, Gerafor pipe diameter: 18/20/22/28 mmOutside dimensions (without lever): 550 x 470 x 700 mmLever length: 1050 mmWeight approx: 100 kgWith- Bending tools:xa0xa0 Diameter 18 mm R 60, R 100, R 140, R 180xa0xa0 Diameter 20 mm R 75, R 115, R 155, R 195xa0xa0 Diameter 22 mm R 90, R 130, R 170, R 210xa0xa0 Diameter 28 mm R 120 mm- two adjustable counterpartsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: pipe size 16 - 76 mm/3/8 to 3 1/4 -Dimensions: 1020/310/H170 mm -Weight: 28 kg
used
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Hole circle: Ø 148 mm -Through hole: Ø 56 mm -Weight: 10.5 kg
used
Description: Three-jaw chuck Ø 250 mm Four-jaw chuck Ø 250 mm Face plate Ø 480 mm Camlock adapter Ø 230 mm Camlock D1-6 recording weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 400 mm
used
Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm
Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100
used
Description: Consisting of 5 pieces Diameter: 250 mm, 240 mm, 160 mm, 160 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 100 kg
used
Description: Consisting of 3 pieces Diameter: 200 mm, 250 mm and 250 mm Also various clamping jaws Approx. Onsite Dimension. (l x w x h): 800 x 600 x 150 mm, weight approx.: 90 kg
used
Description: 14 set of jaw chucks, top jaws on jaws, no manufacturer fits Forkartd chuck 250, see pictures but chuck not included weight approx.: 45 kg, Approx. Onsite Dimension. (l x w x h): 500 x 600 x 400 mm
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 34 mm -Dimensions: see photo techn. drawing -Total dimensions: 130/136/H80 mm -Total weight: 7,0 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 125/130/H70 mm -Total weight: 5.4 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg
used
Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.
new
CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable )
used
2 pcs. Three-jaw chuck φ 230 with inner jaws 100,- each 1 pc Three-jaw lining φ 230 with outer jaws, Emco 100,- 1 pc Three-jaw lining φ 190, inner jaws and soft jaws Recording 6 DIN 55022 100,- 1 pc Three-jaw lining φ 315, inside and outside jaws, sgt . 360,- 1 pc Three-jaw chuck, Tos, φ 100, outer jaws, 5 Din 55022, 100,- 1 pc V-bar chuck Forkardt, KL160, φ. 160, without jaw H- 75mm, Holder: 6 DIN 55022 250,- Prices: ex works !
used
Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm
used
Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm -Number: 1x feed available -Price: per piece -Weight: 16 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: clamping aid -clamping plate -Chuck size: Ø 255 mm -Weight: 20 kg
used
Three-jaw chuck, three-jaw lathe chuck -Handover/sale: in the current condition as seen -Damage: see photos -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 190 mm -Throughput: Ø 57 mm, lining Ø 75 mm -Bolt circle: Ø 168/14 mm -Weight: 16.4 kg
used
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Roto Record, three-jaw chuck recording SK50 -Chuck size: Ø 160 mm -Passage: Ø 42 mm -Weight: 12 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size diameter 195 mm -Passage: Ø 60 mm -Accessories: incl. clamping tool -Weight: 18 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 80mm -Passage: Ø 16 mm -Bolt circle: Ø 66 mm / M6 -Accessories: incl. 2nd set of hard jaws and clamping tool -Weight: 1.7 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Three-jaw chuck: Chuck size Ø 370 mm -Passage: Ø 130 mm -Bolt circle: Ø 235 mm -Intake: short taper 11 with bayonet attachment -Accessories: incl. 2nd set of hard interchangeable jaws -Weight: 77 kg