We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1240 mm w-axis: 950 mm : CNC Radial face slide diameter: 700 mm turning speeds: 16-1250 U/min spindle drive: 30 kW table surface area: 1420x2000 mm workpiece weight: 12000 kg control: Siemens type: 840 C radial face slide travel: 170 mm spindle drive: 42 kW turning speeds: 16-1250 U/min faceplate speeds from - to: 4-315 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1400 mm y-travel: 900 mm z-travel: 1600 mm Table dimensions: 1200x900 mm spindle turning speed range: 25-1400 U/min total power requirement: 16 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 1780 mm y-travel: 1660 mm Control: Heidenhain 355 total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel:3000 mm y-travel:2000 mm z-travel:1750 mm table-size:1600 x 2000 mm max. table load:11000 kg speeds:4000 U/min numbers of tools in magazin:60 b-axis:360 ° Servo motors are Siemens 611 IKZ pump has a max. of 120 bar
used
Equipped with ELGO electronic digital linear position sensor
used
equipped with APS electronic digital position sensor
used
Includes wooden table and tool grinding machine
used
Includes wooden table and tool grinding machine
used
Equipped with feed and output roller conveyor, overhead radial arm saw, Holzmann ABS 2480 dust collector with insert.
used
Equipped with table (3800x830x900 LxWxH in mm), saw blade. Must be dismantled by the buyer.
used
equipped with HM-A roller table with MPS digital position measurement system, shortcut length max. 5050mm; Disconnect with flexible hose
used
Drilling capacity in steel (diameter): 60 mm projection: 2000 mm kl. / gr. Distance between Mounting surface and drill Quill: 525/1690 mm Quill stroke: 310 mm spindle mount MT: 5 table size: 1900 x 1100 mm speed: 30-1250 rpm feeds: 0.08-1.35 mm spindle drive: 5.5 kW weight: 5700 kg space requirement: 2975 x 1100 x 2950 mm
used
Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 300 MACH-id 5343 MAKE Reform Germany TYPE RB 16/50 YOP 2013 SPECIFICATIONS Arm Length 1600 mm Max. drill Ø steel 50 mm Max. drill Ø cast 60 mm Max. tap Ø M 60 M Stroke pinole 300 mm Floor / table area 1750 x 980 mm Speeds / ranges 2000 Rpm Spindle Taper ISO/Bt/MkMk 5 ISO/Bt/Mk Column sleeve 280 mm Quill Ø 70 mm Power 6.5 kW DIMENSIONS Length 2400 mm Width & ...
used
Drilling capacity: 100 mm Radius: 2200 mm Spindle taper: 110 MACH-id 5304 MAKE SAS Torino TYPE TM 1900 YOP 1981 SPECIFICATIONS Max. drill Ø steel 100 mm Max. drill Ø cast 100 mm Stroke pinole 550 mm Throat 2400 mm Column sleeve 500 mm Quill Ø 110 mm Spindle Taper ISO/Bt/Mk 6 ISO/Bt/Mk Speeds / ranges 1275 Rpm Table Length 2215 mm Table Width 1180 mm Power 11 kW Max. distance spindle - table &nbs ...
used
Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 0 MACH-id 3997 MAKE MAS Kovosvit TYPE VO 50 / 1600 YEAR 1995 SPECIFICATIONS Arm Length 1600 mm Drilling capacity 60 mm Drilling capacity steel Ø 50 mm Drilling capacity cast iron Ø 60 mm Tapping MM 50 Spindle taper Mk 5 Spindle diameter Ø 55 mm Spindle travel 310 mm Floor / table area 1470 x 986 mm Power 6 kW Spindle speeds / ranges 2500 Rpm DIMENSIONS Length 2900 mm Width 1500 mm Height 3200 mm
used
High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton
used
Radial drilling machine make MAS type VR 6 AMachine -No: 219 built in 1963Projection: 2000 mmgr. drilling capacity at 60/25 kg strength: 63/80 mmgr. boring capacity: 300 mmgr. thread cutting capacity: M 64 x 4 / M 85 x 4kl./gr. Distance spindle / base plate: 540/1865 mmvertical adjustment of the boom: 950 mmhorizontal adjustment of the boom: 1613 mmSwing possibility of the boom: 0 - 360 °Spindle mount: MK 5Spindle stroke: 380 mm16 spindle speeds: 11.2 - 2000 rpm.16 feeds: 0.035 - 2.8 mm / rev.Dimensions of the base plate: 3200 x 1100 mmClamping surface of the base plate: 2290 x 1080 mmHeight of the base plate: 235 mmDrive power: 5.5 kWTotal installed power: 12.6 kWDimensions approx: 3240 x 1300 x 3000/3900 mmWeight approx: 5800 kgWith- hydraulic clampingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: ...
used
Rapid radial drilling machine make DONAU type DR 13 GMasch. -No: 332-1 built in 1967Technical specifications:Drilling capacity ST 60 / GG 213 / 16 mmThread St 60 / GG 2 M 10 / M 12Throat: 800 mmTable size: 630 x 915 mmSpindle stroke: 100 mmSpindle size: MK 2Stepless speeds: 200 - 3400 rpm.Weight approx: 800 kgWith- threading device- machine lightused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine make VEB Schmölln type BR 40x1250Machine -No: 62/63, built in 1963Technical specifications:Drilling capacity in ST 60- 45 mmDrilling capacity in GGL 20: 60 mmSpindle mount: MK 5Extension of column jacket spindle axis: 300 - 1250 mmDrilling radius: 450 - 1400 mmDrilling depth: 355 mmClamping surface: 1450 x 920 mmDrilling spindle - base plate: 375 x 1375 mmHeight adjustment of the boom: 750 mmLateral displacement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range: 0.063 - 0.63 mm / revConnected load of the machine: 5.2 kWSpace requirement: 2050 x 930 x 3200 mmWeight approx: 3000 kgWith- Cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availa ...
used
Radial drilling machine make HELLER type RB 50/1250Serial -No: 29551 built in 1961Technical specifications:Drilling capacity in steel: 50 mmDrilling capacity in GG: 60 mm12 spindle speeds: 33 - 1500 rpm.Spindle mount: MK 512 automatic feeds: 0.08 - 1.5 mm/revQuill stroke: 301 mmProjection: 1250 mmColumn diameter: 380 mmDrive power: 4 kWDimensions approx.: 2200 x 2300 x 2780/3110 mmWeight approx.: 4250 kgused, in real good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine make CSEPEL type RFH 75/2000Year of construction 1982Technical specifications:Drilling capacity in solid/steel: 75 mmDrilling capacity in solid/cast: 90 mmBoring in steel: 125 mmBoring in cast: 140 mmTapping steel metric: 60 mmTapping cast iron metric: 70 mmsmall/large Projection: 440 / 2000 mmVertical boom height adjustment: 950 mmQuill stroke: 380 mmSpindle mount: MK 521 speeds: 19 - 1900 rpm.12 feeds: 0.047 - 22 /revColumn diameter: 450 mmBase Size: 2200 x 800mmDimensions: 3220 x 1130 x 3400mmWeight approx.: 7000 kgwith- Drill table 1000 x 800 x 750 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data Drilling capacity approx. 100 mm Spindle mount Mt 6 Reach 3000 mm 21 spindle speeds 18-1800 rpm 18 feeds 0,0375 - 2 mm / Rev Column diameter 600 mm Weight approx. 15000 kg max. distance plate - spindle 2100 mm Prepared for container loading