used PAUL MÜLLER Eccentric Presses

Eccentric press #5449 Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Weight: 2550 kg

Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min.

Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table top weight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm

Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidt weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc.......

SPECIFICATIONS: Electric hot operation Work table size mm: 2500 x 1300 with intermediate plate 4 pistons, diameter mm: 90 Vertical stroke mm: 450

Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Very nice good working sawmilling for sale !! Very nice well maintained sawmill line for sale !! Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor ..... grinders Very well-kept LINE! READY TO WORK !!

Very nice good working sawmilling for sale !! Very nice well maintained sawmill line for sale !! Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor ..... grinders Very well-kept LINE! READY TO WORK !!

Very nice good working sawmilling for sale !! Very nice well maintained sawmill line for sale !! Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor ..... grinders Very well-kept LINE! READY TO WORK !!

Very nice good working sawmilling for sale !! Very nice well maintained sawmill line for sale !! Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor ..... grinders Very well-kept LINE! READY TO WORK !!

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Electronics / Board CNC cross-cutting system Paul 14E Y/O'A 1998

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

PAUL K30U/800

Multi-blade saw Paul Type K 34 G – OU/1200 Specifications: • Working width (mm): 1200 • Total power (kW): 47.6 • Saw shaft top: 1 • Saw shaft bottom: 1 • 5 saw shafts: included • 1 wave car: included • various spacer rings • Top rollers: with PU rubber coating • Bottom rollers: corded • Machine was technically overhauled about 1 year ago by the company Paul

– German production –DTR – optimization of cutting width – dripping cross saw – automatic blade spacing – year of production 1989 TECHNICAL PARAMETERS: .max. element width 920 mm .max. element height 90 mm .max. element length 6000 mm main engine power 37 kW disc diameter max. 300 mm spindle diameter 60 mm sleeve diameter 70 mm fixed sleeve with a length of 60 mm floating sleeve for 1 disc floating sleeve with spindle length of 100 mm number of measuring heads 15 measuring head spacing 350 mm distance between measuring heads total input power 10 kW cross-cut saw for cutting material for a length of 2630 mm saw leveling the material cascade for transporting the board hydraulic feed in smooth speed control hydraulic material pressure hydraulic material height adjustment

PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes

Shaft diameter 40 mm Cutting height 125 mm Cutting width 750 mm Clearance height 130 mm Distance between upper rollers 600 mm Rotation speed of saw shaft 3300 rpm Power 55 kW Weight 1350 kg Dimention W*L*H 2000х2000х1500 mm

Transformer, control transformer PAUL PRENGEL (PREDÜ) PDT 0.1 ( PDT0.1 ) Ve: 400 V Va: 17 V 0.1 kVA Dimensions: 130 x 70 x 140 mm