We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Complete regranulation plant OMP Prealpina Type:ES-130. Screw and cylinder were renewed in November 2021 A new groove bushing as a spare part Simple degassing with vacuum pump DC drive used for PE/PP. Throughput at PE approx. 500-600kg. at PP.450-500.kg. per.h. Consisting of foil silo with agitator and discharge screw. Regrind/granulate dosing screw. Masterbatch dosing screw Tamping plant Extruder 130 L/D Hot tee granulator( also water ring granulator) Centrifuge Classifying sieve Removal with pressure blower. Plant is tested and stored (immediately ready for use)
used
OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Constructed in 2002, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with 180 mm screw 35 L/D, vacuum degassing system, 415 kw drive, semi-automatic screen-changer with 300 mm diam. screens., water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Running until October 2023, Available RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request., See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), ask for video of the line running
used
PREALPINA 85 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, The line includes:, Buffer silo with agitators and feeding auger, forced feeding unit, extruder with 85 mm screw 35 L/D, vacuum degassing system, semi-automatic screen-changer, water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, nominal throughput rate 180.240 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 1995, The line is offered RECONDITIONED, Running until October 2023, Available AS IS or RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request.
used
for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS
used
Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned
used
materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration
used
The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens.*, **FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-)*** hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawing ...
used
EXTRUSIONE LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, n.4 next-to-new Maguire gravimetrical dosing units on supporting structure, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger, water ring pelletizer, drying centrifuge, vibro classifier, This line has been totally reconditioned in 2020 replacing many parts with original ones (cabinet/feeding piece/screw/barrel,....), Still connected and working with PE., Ready-to-go, THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP PC PS ABS, INSTALLED POWER: 435 KW, AVAILABILITY: immediate
used
Manufacturer: OFFICINA MECCANICA PREALPINA S.R.L Type/Model: T.60 L/D 35 with vent Year: 1995 Motor : 45 KW AC Condition: in good working condition Hours :20933 Screw diameter: 60 mm, recently refurbished Hour meter: 20933 Capacity of 70÷100 kg/h Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PC, ABS, ABS/PC Line composition: - Single extruder - rigid materials dosing unit - die head-spaghetti - filter Cresta Ø 90 mm - hydraulic screenchanger semi-automat without interrupting the extrusion - degassing pump - cooling water bath - Electrical equipment of control and command with cooling - Sheer pelletizing unit SGS 100
used
CDM PREALPINA EXTRUSION LINE 105 mm 35 LD for PE PP PS PC ABS PS, total installed power 311 kw ca, average throughput rate 400 kg/h depending on material and feeding rate, The line includes a granulator 44/80 55 kw, pneumatic transport (4 kw) to buffer silo, screw extraction, Crammed feeding unit, barrel with 105 mm screw diam. 35 L/D, Vacuum degassing pump, Ceramic heaters, 132 kw drive, Hydraulic screen changer 190 mm diam., Hydraulic pack, Water ring pelletizer TT20, Centrifugal dryer, 3-ways vibro-classifier
used
Description Regranulation line for polyolefins Screw diameter 85 Nr.1 Vent Spaghetti granulation head Hydraulic screen changer Cooling tank Pelettizer
used
Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.
used
Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26
new
New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand
used
see PDF attached
used
Key data: 130
Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982
used
Key data: 120
Extruder 1 spindle: 120 mm Ø, 35 L/D, for graining, brand: FBM Falzoni, with degasser. Vacuum pump: 5.5 Kw, Hydraulic filter changer: 160 Ø. Overhead cut to the water and centrifuge. Extruder motor: 180 Kw, with variable speed drive.
used
Key data: 125
Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.
used
Key data: 120
Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.
used
Key data: 120
Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.
used
Key data: 90
Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.
used
Key data: 60
Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.
used
Key data: 60
Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.
used
Key data: 120
Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.
used
Key data: 130
Granceado line (pelletized) Extruder 1 spindle, brand: Previero Sorema 130 Ø 35 L/D, motor: 250 Kw with variable speed drive. Degasser, hydraulic filter changer: 215 mm, overhead cutting to water, centrifuge, discharge cyclone, tromel: 1 m, rotary valve, solids transport vacuum cleaner. Forced feeding with silo: 11,000 l. with remover. Exit cyclone for dust.