british flag
Resale Logo

POWER PLANT used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and new packaging machinery  1&1 Pulspack e. K.  http://www.pulspack.com 
banner logo
start page > keywords POWER PLANT > results
915 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125339237 309

PALLMANN PS 4-5 F2/g3 for sale
Granulating mills


Crushing plant with Crusher Type PS 4-5 F2/G3 BJ. 2005 Task opening 702 x 500 mm Cutting width 500 mm Rotor speed 660 RPM Number of rotor mass 3 piece Engine 55 kW with translation 2.24 Printing execution 10-15 h ...
used machine
 
Crushing plant with Crusher
Type PS 4-5 F2/G3
BJ. 2005
Task opening 702 x 500 mm
Cutting width 500 mm
Rotor speed 660 RPM
Number of rotor mass 3 piece
Engine 55 kW with translation 2.24
Printing execution 10-15 hydraulic power unit:
Operating pressure max 150 bar
Capacity 18L / min
Motor 5,5 kW
2005
Price  
    request
125401270 1300

PFEIFFER BALZERS GROUP MOV 441 for sale
Soldering Furnace


temperature max.: ° internal length of the oven: mm internal width of the oven: mm total power requirement: 115 kVA weight of the machine ca.: 3,0 t dimensions electric cabinet: 850 x 650 x 2050 mm dimension machine [. ...
used machine
 
temperature max.: °
internal length of the oven: mm
internal width of the oven: mm
total power requirement: 115 kVA
weight of the machine ca.: 3,0 t
dimensions electric cabinet: 850 x 650 x 2050 mm
dimension machine [...]: 4,2 x 4,0 x 3,1 m
VACUUM HEAT TREATMENT OVEN - HIGH VACUUM OVEN
Plant consists of:

Vacuum soldering oven: Boiler type MOV 441, size Ø 850 x 1400mm, working space Ø 500 x 500mm with 100 liter volume, operating temperature max. 1,400 ° C, heating capacity 90 kVA, compressed air min./max .: 5/7 bar,
Refrigerant Cooling gas = rapid cooling Run approx. 60 l / min, temperature max. 27 ° C

2 pieces of suction devices:
  Suction unit type WKP 2000, pumping speed 2,150 m³ / h, drive power 5,5 kW, speed 2,886 rpm, size: L: 1300xW: 600xH: 1400mm
  -Sauggerät TypDUO 250A, pumping speed 250 m³ / h, drive power 7,5 kW, speed 960 U / min, size: L: 1300xW: 500xH: 1200mm

4 pieces of vacuum pumps:
  Pre-vacuum pump: DUO 250A rotary pump
  -Fine vacuum pump: Roots pump WKP 2000
  -High vacuum pump: DIF 400 oil diffusion pump
  -Fast cooling = Roots pump WKP 1000 SP

Transformer type DFBC 100/1, built in 1987, rated power 90 kVA, size L: 980xB: 980xH: 1150mm
including documentation

Plant is not connected!
1987
Price  
    request
125338858 101

DECKEL MAHO DMG DMC 60 H 60H for sale
Numerically Controlled Machining Centres


CNC machining center Deckel Maho DMG DMC 60 H At the time new price approx. 500.000 DM (â?¬250.000,-) Important technical data: Control: Siemens 840 C. Spindle speed: 15,000 1/min Year of constructio ...
used machine
 
CNC machining center Deckel Maho DMG DMC 60 H

At the time new price approx. 500.000 DM (â?¬250.000,-)

Important technical data:

Control: Siemens 840 C.
Spindle speed: 15,000 1/min
Year of construction: 1995
Pallet number: 2
Tool holder: SK 40
Tool capacity: 40
Procedures: (x/Y/Z/W) 600/560/660/360 °

She has traces of use, corresponding to their age.

The machine is sold with chip conveyor and cooling plant and is used currently still in production, but only up to the 23.05.2018, then the machine from the power supply will be taken and stored. Holder, tools or towers are not supplied.

The machine is fully functional and can be visited at any time.

We love to hear from you.
1995
Price  
    request
125364850 107

A&N PLANT SAR 2400 for sale
Mot.Behaelter-, boiler turning device


Technical data: -Total Traglast 120,000 kg -Powered capacity + revolving unit 60,000 kg -Container diameter approx. 450-5200 mm -self-centering joint roller stands - roll diameter approx. 500 mm -Roller bearing su ...
used machine
 
Technical data:

-Total Traglast 120,000 kg
-Powered capacity + revolving unit 60,000 kg
-Container diameter approx. 450-5200 mm
-self-centering joint roller stands - roll diameter approx. 500 mm
-Roller bearing surface of the castors 360 mm
-powered unit + revolving unit with rubber-coated rollers
-Roller bearing surfaces without significant wear and tear
-infinitely variable rotation speed 75-1500 mm / min
-Remote control for re - and Li-powered race - 400 V
-Space angetr. Unit B approx. 3600 x H 1500 X 1600 mm
-Motoryacht. with running unit B approx. 2600 x H 1500 x D 1300 mm
-Weight angetr. Unit weight approx. 7300 kg - CA. 4500 kg with running unit
2007
Price  
    request
125299808 1200

STEINECKER Complete brewery for sale
Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equip ...
used machine
 
Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year

The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs

This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment.

Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling.

Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left.

For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled

Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

1984
Price  
  FI   request
125290083 205

WEEKE, BARGSTEDT diverse for sale
Drilling line


Drilling line\r\nBrand: Weeke, Bargstedt\r\nType: BST 100\r\nYear: 2001\r\n\r\nData of the plant:\r\n\r\nMaterial\r\nWorkpiece dimensions\r\nLength: min. 240mm, max. 2500mm\r\nWidth: min. 210mm, max. 1050mm\r\nThickness: ...
used machine
 
Drilling line\r\nBrand: Weeke, Bargstedt\r\nType: BST 100\r\nYear: 2001\r\n\r\nData of the plant:\r\n\r\nMaterial\r\nWorkpiece dimensions\r\nLength: min. 240mm, max. 2500mm\r\nWidth: min. 210mm, max. 1050mm\r\nThickness: min. 8mm, max. 40mm\r\nWeight: max. 100kg\r\n\r\nWorkpiece surface: laminated, coated, smooth, separable and absorbend\r\n\r\nOrder:\r\nMax. 4 parts in a row\r\nMax. 4 parts next to each other\r\n\r\nTBH/EQ/25/12/A/S\r\nBargstedt loading station single sided crosswise\r\nPitless for continous loading of processing lines (fix edge left hand side)\r\nup to 50kg weight and basic power max 12 cycles/min.\r\n\r\n1 Driven stack roller conveyor, positioned in front of the stacking station\r\n1 Lifting platform with driven stack roller conveyor and protective board disposal for single panels or palettes\r\n1 Vacuum suction vehicle for minimal workpiece dimensions 300 x 280 mm\r\n1 Stripping wall\r\n1 Liftable and lowerable single panel roller conveyor\r\n1 Cross-conveyor belt with 2 belt outriggers\r\n\r\nEntering unit NC 21 complete\r\n\r\nTHR80/L/40/28/12\r\nBargstedt driven stack roller conveyor\r\nFix side on the left\r\n\r\nTFZ10/15/25/S\r\nBargstedt tooth belt conveyor\r\n\r\nBST 100/25\r\nDowel hole drilling machine BST 100\r\n\r\nVertiale drillings\r\nHorizontal drillings min. 250mm (x), max. 2500mm (x)\r\nWorkpiece width min. 150mm (y), max. 1050mm (y)\r\nWorkpiece strength min 12mm (z) (8mm without horizontal drillings), max. 45mm (z)\r\nDistance between supports min. 250mm (x)\r\nWorking height 1000mm\r\n\r\nMachine is equipped for sectional setup of 3 stations:\r\n\r\nStation 1\r\n1 Horizontal guidance unit (movable side) (on the right hand side seen in throughfeed direction)\r\n1 Horizontal guidance unit (fix side) (on the left hand side seen in throughfeed direction)\r\n2 Horizontal drilling supports with high dynamic height adjustment\r\n2 Horizontal drilling units with motorical drilling feed via servo motor\r\n2 Motorical movements of horizontal drillig units\r\n2 Pneumatical workpiece stops\r\n1 Workpiece transport in front of the machine consisting of 2 transport belts\r\n1 Workpiece transport device in the machine\r\n\r\nStation 2 - 2500mm\r\n1 Horizontal guidance units (movable side) (on the right hand side seen in throughfeed direction)\r\n1 Horizontal guidance units (fix side) (on the left hand side seen in throughfeed direction)\r\n2 Horizontal clamping slats\r\n2 Pneumatical workpiece stops\r\n2 Pneumatical cylinders\r\nHighly dynamic adjustable axis X\r\n4 Pieces verticale drilling support\r\n8 Pieces verticale drilling feed unit\r\n8 Pieces motorical spindle adjustment\r\n4 Pieces clamping bridges with parallel guidance\r\nDrilling gear like shown in the setup plan\r\n2 pieces horizontal drilling gear:\r\n- 50mm separation\r\n- Drilling spindle is via program single selectable, incl. the pneumatical switching device\r\n8 pieces verticale drilling gear:\r\n- 50mm separation\r\n- Drilling spindle is via program single selectable, incl. the pneumatical switching devices\r\n\r\nStation 3\r\n1 Horizontal guidance unit (movable side) (on the right hand side seen in throughfeed direction)\r\n1 Horizontale Führungseinheit (fix side) (on the left hand side seen in throughfeed direction)\r\n2 Horizontal dowel inserting supports, grid rail 25mm separation\r\n2 Pneumatical workpiece stops\r\nHigh dynamic adjustable axis W\r\nWorkpiece transport device\r\n12 pieces dowel inserting tools, 25mm dowel separation, dowel length 8x40mm (6 pieces on each side)\r\n2 vibrational conveyors 6-tracks\r\nGlue supply monitoring system control\r\nIndus.-Multiprozessor-control IPC and Simatic S7\r\nCentral computer\r\n\r\nTSH/EQ/25/12/A/S\r\nBargstedt stacking station single sided crosswise\r\nPitless, for drilling lines (fix edge on the left hand side) up to 50kg weight and basic power max. 12 cycles/min.\r\n1 Cross-conveyor belt with 2 belt outriggers\r\n1 liftable and lowerable single palette roller conveyor\r\n1 Vacuum suction vehicle for minimal workpiece dimensions 300x280mmm\r\n1 Lifting platform with driven stack roller conveyor\r\n1 driven stack roller conveyor, positioned behind the stacking station\r\n\r\nTHR80/L/40/28/12\r\nBargstedt driven stack roller conveyor\r\nFix side on the left hand side\r\n\r\nNote:\r\nThe specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.\r\n\r\n
2001
Price  
    request
125284474 1300

OERTZEN Minipower for sale
Hot water high pressure cleaner


High pressure cleaners hot water, O'Neill mini power, demo rental unit, 130 bar, 540 L / h, gun, Lance, flat spray nozzle, 10 m high pressure hose, burner operating with oil or diesel, 220 volt,
used machine
 
High pressure cleaners hot water, O'Neill mini power, demo rental unit, 130 bar, 540 L / h, gun, Lance, flat spray nozzle, 10 m high pressure hose, burner operating with oil or diesel, 220 volt,
2017
1,420 €  
    request
125203577 702

HAAS SOW 100G for sale
Belgian Waffles Plant


Manufacturer: HAASType: SOW 100GYear of manufacture: 2007Line consists of:- Thermo-Soft Waffle Baking Oven SOW 100G - 1pcs.- Mesh belt transporter GTB-60 (with knife edge, 600mm belt width and length 5m.) - 1pcs.- Pipe e ...
used machine
 
Manufacturer: HAAS
Type: SOW 100G
Year of manufacture: 2007
Line consists of:
- Thermo-Soft Waffle Baking Oven SOW 100G - 1pcs.
- Mesh belt transporter GTB-60 (with knife edge, 600mm belt width and length 5m.) - 1pcs.
- Pipe exhaust VE40 - 1pcs.
- Pipe exhaust VE50 - 1pcs.
Dough mixer - ATM300, 300l
Cream-line including, \"sandwich\" function
Power Output: 500kg/h for a baking time of 3.5 min, a product weight of 20 g and a jaw speed of 6 BP/min
2x packaging machine Carrera 500PC can be offered on extra charge
Gas: 52 m3/h
Electricity: 32 kW/h
Very good condition!
incl. Packaging
Dismantling and new comissioning on request.; Very good condition
2007
695,000 €  
    request
125242431 1002

PEGSON POWERSCREEN XH 320 for sale


with side discharge conveyor and magnetic separator, 4.618 operating hours
used machine
 
with side discharge conveyor and magnetic separator, 4.618 operating hours
2012
used machinery auction RESALE 100,000 €  
    request
125158852 1300

MAFAC Palma for sale
Degreasing Plant


Project No: 904658 Quantity: 1 pc. Manufacturer: MAFAC Type: Palma Control: Siemens Year of Manufacture: 2006 Condition: Used Machine PARTS CLEANING Cleaning solvent and machine type Cleaning solvent: water  ...
used machine
 
Project No: 904658
Quantity: 1 pc.
Manufacturer: MAFAC
Type: Palma
Control: Siemens
Year of Manufacture: 2006
Condition: Used Machine

PARTS CLEANING

Cleaning solvent and machine type
Cleaning solvent: water based
Front Loader
No. of chambers 1 pc.

Drying
Drying by heated and filtered air with air blower
Rotary blowing system
Power air heater 4,5 kW

Parts feeding
Rotary unit
Rotation (fixed, rotary, luffing)
Speed control for rotation of basket stepless and selectable

Spraying unit
Fix spraying system

Flushing unit

Ultrasonic unit
Power 2×1,5 kW
Frequency 25000 Hz

Loading/unloading
Conveyor for feed-in of parts baskets
Length of the conveyor 5000 mm

ACCESSORIES
12 pc. Baskets with intermediate- and top covers

GENERAL TECHNICAL DATA
Operating voltage 400/50 V/Hz
Mains fuse 120 A
Total power requirement 56-72 kVA
Machine dimensions (LxWxH) approx. 2300x2300x2400 mm
Space requirement of the whole equipement (LxWxH) approx. 5000x3300x2400 mm

REMARKS
Well maintained water-based degreasing plant for mass parts provided in baskets. Up to 5 baskets in the infeed resp. outfeed area. Cleaning, rinsing, drying in one chamber acc. to different selectable resp. programmable cycles.

We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection.
2006
Price  
    request
125242369 1300

MAHLE SFK-09 009 016X16 S1S S3 for sale
Dust extraction plant


Aspirator collector dust Extractor manufacturer: MAHLE Type: SRP 09 009 016 X 16 S1S S3 year: 2016 New and unused! Filter area: 108 m² Filter material: Polyester Fleece with PTFE membrane, Ti07/1 filter ...
used machine
 
Aspirator collector dust Extractor manufacturer: MAHLE
Type: SRP 09 009 016 X 16 S1S S3 year: 2016
New and unused!

Filter area: 108 m²
Filter material: Polyester Fleece with PTFE membrane, Ti07/1 filter cartridges: 9 x 852 032 Ti07/1-12 end plates of the cartridges: St., galvanized filter resistance: approx. 3-4 mbar in mint condition, maximum 15 mbar residual dust content: below 0.5 mg / m3 housing material: mild steel surface nschutz go.: powder coating in RAL 9006 permissible operating pressure: +-50mbar allowable operating temperature: 60 ° C.
Cleaning system: Mahle rotating air nozzles pressure: 4 bar, Abreinigungsssteuerung oil-water - and dirt:
MFS 05delta-p (adjustable for time-dependent
or differential pressure-dependent cleaning system, with delta-p display) input voltage control: 230V, 50 Hz fan: type: TR 561, 2-pole, 1500U/min flow rate: 8000 m 3/h pressure: 3800Pa, you are about 2000Pa for your raw and pure gas side pipe strand on the site g sound levels (noise of beam from the housing): approx. 78dB(A) in 1, 5 m fan housing: steel sheet, painted motor output 15KW power type: 400/690V, 50 Hz on site is a frequency inverter to provide!

The fan is a special version for the higher
Temperature range has been selected, by way of derogation
the previous version of the series

The required operating point (8000 m 3/h at 4800Pa) requires
in this VR use of a FU with setting 52Hz.

including setting silencer
2016
Price  
    request
125017469 1900

KATRES KAD 2 x 15 PA for sale
Double Drying Chamber


Weight approx.: 15000 kgDimensions (l x w x h) approx.: 32640 x 11070 x 6150 mmDescription: Exterior dimensions of drying plant 32.64 x 11.07 x 6.15 m, inside chamber dimensions 15 x 10.64 x 4.6 m, heating medium: water, ...

 
Weight approx.: 15000 kg
Dimensions (l x w x h) approx.: 32640 x 11070 x 6150 mm
Description: Exterior dimensions of drying plant 32.64 x 11.07 x 6.15 m, inside chamber dimensions 15 x 10.64 x 4.6 m, heating medium: water, electrical power consumption 2 x 45 kW, number of fans: 2 x 15, diameter 800 mm, 3 kW, max. 120°/85°, volume of saw wood transported 2 x 292 m³ (thickness 50 mm), A-1 insulation glass fibre, sliding door, 2 inspection doors, required heating capacity 2 x 800 kW, heating system is not included, control placement: rear wall of the chamber
 
used machinery auction RESALE 15,000 €  
  DE   request
125242352 101

HWACHEON Vesta 1000 10K for sale


CNC control FANUC 0i-MD Procedures x axis 1000 mm Y-axis 550 mm Z-axis 500 mm --------------------------------------------------------------------- Work table 1100 x 500 mm maximum work-piece weight of 700 kg - ...
used machine
 
CNC control FANUC 0i-MD

Procedures
x axis 1000 mm
Y-axis 550 mm
Z-axis 500 mm
---------------------------------------------------------------------
Work table 1100 x 500 mm
maximum work-piece weight of 700 kg
---------------------------------------------------------------------
Spindle speeds up to 10,000 1/min
Power 15/11 KW
BT 40 tool holder
---------------------------------------------------------------------
Rapid traverse x/y/z 36/36/30 m / min
Feed range 1-24.000 mm / min
---------------------------------------------------------------------
Tool magazine 24 x
Max tool diameter 80/150 mm
maximum tool length 300 mm
maximum tool weight 8 kg
---------------------------------------------------------------------
Machine surface Lxwxh 3,270 x 2.180 x 2.670 mm
Machine weight approx. 6,500 kg
---------------------------------------------------------------------
-Conveyors
-Cooling plant
-Internal coolant through the spindle
-Signal lamp
-Spindle chiller
-Hwacheon effecient Contur control system
-Hwacheon tool load detect system
-Hwacheon Al Nano contour
-Cutting feed optimization system
-Manual Guide i
-Transformers (30kVA)
2011
Price  
    request
125001858 109

WAGNER for sale
Powder coating / powder cabin


For sale is due to transition a product line 1 x Wagner movable plastic powder booth / powder coating plant with cyclone, extraction and powder preparation used, very good condition - can be seen currently still un ...

 
For sale is due to transition a product line

1 x Wagner movable plastic powder booth / powder coating plant with cyclone, extraction and powder preparation

used, very good condition - can be seen currently still under power.

consisting of:
1 piece Wagner plastic powder cabin
2 piece cyclones
4 piece horizontal lifting devices (two units per cabin page)
each lifting appliance 4 piece Wagner C4 automatic powder spray guns
1 piece Wagner C4 rigid powder spray gun
1 piece Wagner C4 manual powder spray gun
2 piece Wagner powder promotion centres
Central control
Fire detection system of total Walter
Light curtain height and gap control
2 PCs access for hand before or after coating

Workpiece dimensions:
L: approx. 3000 mm
B: approx. 600 mm
H: 2000 mm

Conveyor system: Linear ceiling overhead conveyor
Transport speed: up to 9 m / min, depending on the height of parts and part geometry (plant is currently at 5 m / min operated).
Powder concentration: at 20 guns per 250 g / min, and 28000 m3/h approx. 12 g / m2
Type of cab: plastic Mono-cyclone cabin
Number of gun slots: 9 left / right 9
Suction capacity of the cabin: 2 x 14,000 m3/h = 28,000 m3/h
Number of hand openings: 1 left / right 1
Size: B: 750 mm x H: 2100 mm stroke type: electromechanical lifting equipment with remote adjustment of Umkehrpunke and speed of the Cabinet of
Number of lifting devices: 2
Working stroke: Max 2400 mm
Type of Verschiebeeinric
 
Price  
    request
125242338 101

HELLER MC16 for sale
Machining Centres


CNC control Siemens 840D Travel x axis 630 mm y axis 630 mm z axis 630 mm B-axis 360,000 x 0.001° ------------------------------------------------------------- Number of pallets 2 Pallet size 500 x 400 mm ...
used machine
 
CNC control Siemens 840D

Travel
x axis 630 mm
y axis 630 mm
z axis 630 mm
B-axis 360,000 x 0.001°
-------------------------------------------------------------
Number of pallets 2
Pallet size 500 x 400 mm
maximum Aufspannen weight 500 kg
------------------------------------------------------------
Speed range HS spindle up to 24,000 1/min
Spindle drive power of 30 kW speed 60 m / min
------------------------------------------------------------
Rack tool magazine with 252 tool places
Tool holder HSK 63
Max tool diameter is 72 mm all places
Max tool diameter with free space 150 mm
Maximum tool length 320 mm
Maximum tool weight 12 kg
-------------------------------------------------------------
Power supply 400V/50 Hz
Machine weight approx. 8.5 t
-------------------------------------------------------------

-Internal coolant supply 50 bar / 1500 l
-Cooling plant with paper band filter Knoll
-CFC free coolant radiator
-Dynamic package 1
-Feed power display
-Evasion
-Conveyors
-Drill bit breakage detection
-Working space irrigation
-Shelf magazine 252-fach HSK63 tool planning SINTDI
-Tool pick up system of the range
Infrared receiver for measuring probe Renishaw

Note:
The machine is currently built at a Fastems rack magazine
and is sold as a single machine.
For stand alone operation without Fastems system, a sliding door must be attached on the front pallet places.

2002
Price  
    request
124964655 109

DROOP & REIN FS 130 gKE for sale
Milling head 22 kW


second-hand from plant dismantling a DROOP & REIN FS 130 gKE CNC vertical milling machine model 1966 1 x Head 22 kW with iso50 tool capturing Milling spindle diameter: 130 mm Tool holder: SK 50 Diameter of ...
used machine
 
second-hand from plant dismantling a DROOP & REIN FS 130 gKE CNC vertical milling machine model 1966



1 x Head 22 kW with iso50 tool capturing



Milling spindle diameter: 130 mm

Tool holder: SK 50

Diameter of the milling spindle sleeve: 210 mm

Axial displacement of the milling spindle: 200 mm

Spindle speeds: 18 PCs / 31.5-1600 U/min

Engine power: 22 kW / 1455 RPM



The engine has had little run has been disassembled only for lack of space.
1966
Price  
    request
125242325 101

HONSBERG Mach 1-HSC500 for sale
Machining Centres - Double Spindle


CNC control Siemens 840D Verfarwege x / y / z = 1030/630/500 mm B-axis 360.000 x 0,001° ------------------------------------------------------------------- 2-position pallet changer Pallet size 500 x 500 mm Max  ...
used machine
 
CNC control Siemens 840D

Verfarwege x / y / z = 1030/630/500 mm
B-axis 360.000 x 0,001°
-------------------------------------------------------------------
2-position pallet changer
Pallet size 500 x 500 mm
Max pallet load 300 kg
-------------------------------------------------------------------
Number of spindle 2
Spindle power
Spindle 1 = 24 KW
Spindle 2 = 38 KW
Spindle speeds up to 16,000 1/min
--------------------------------------------------------------------
Tool magazine 60-fach
Tool holder HSK 63
--------------------------------------------------------------------
Rapid traverse 45 m/min

-Air filter system
-Cooling plant
1999
Price  
    request
124735822 206

BÜRKLE BTF 1528-1400 for sale
Vakuumpresse


Vacuum press\r\nBrand: Bürkle \r\nType: BTF 1528-1400\r\nYear: 2003\r\n\r\nTechnical data:\r\nInstalled power:\r\nHeating: Electro heating plate 31,0 kW\r\nHydraulic unit 2,5 kW\r\nVacuum pump I 1,5 kW \r\nDrive of the  ...
used machine
 
Vacuum press\r\nBrand: Bürkle \r\nType: BTF 1528-1400\r\nYear: 2003\r\n\r\nTechnical data:\r\nInstalled power:\r\nHeating: Electro heating plate 31,0 kW\r\nHydraulic unit 2,5 kW\r\nVacuum pump I 1,5 kW \r\nDrive of the plant 0,75 kW\r\nThermal oil circulation pump 1,5 kW\r\nTransport to loading and unloading 3,75 kW\r\nTransport under the press 0,75 kW\r\nMulti-Turning 7,0 kW\r\nBelt (cut Station), movable 1,0 kW\r\nPaternoster inclusive foil feed 1,75 kW\r\nPin-system 1,5 kW\r\n\r\nCompressed air supply maximal 6,0 bar\r\n\r\nSurface material:\r\nfrom coil or cut\r\nPVC-Folie 0,30 - 1,0 mm\r\nHochglanz-Folie 0,5 - 1,0 mm\r\nPET-Folie 0,35 - 0,6 mm\r\n\r\nCarrying material:\r\nMDF-plate with smooth or profiled surface.\r\nThickness tolerance +/- 0,15 mm\r\nPlate temperature: approx. + 18° C\r\nPlate moisture: approx. 6 - 8%\r\n\r\nThermoform-coat, without membrane, 1400 mm foil\r\nNeeded space 1330 x 2630 mm\r\nMax. part size 1250 x 2550 mm\r\nMin. foil width 1400 mm\r\nPart thickness 18-28 mm\r\nChamber height 45 mm\r\nLower parts, automatical PIN-System 13 mm\r\n\r\nFeed and loading Station\r\n- Reversible driven transport, mounted on lifting table\r\n- Working height like BTF, variable in height adjustable.\r\n- Drive power approx. 1 kW, drive frequency controlled.\r\n\r\n1 Bürkle-Multifoiler type BTF 1528\r\nHeating plate dimensions 1500 x 2800 mm\r\nLoading side 1500 mm\r\nSteel plate thickness 100 mm \r\nHeating plate thickness, incl. isolation 66 mm \r\nMax. heating plate temperature 140° C\r\nCompressed air supply max. 6 bar\r\nHeating power upper heating plate, installed 31 kW\r\nThermal oil circulation pump 1,5 kW\r\nOperation side on the right\r\n\r\n1 Chain transport driven, reversible, frequency controlled, in the press\r\n\r\n1 Chain transport driven, under the press, frequency controlled\r\n\r\n3 Lay-up tray\r\nFoil width 1400 mm\r\nFrame height 30 mm\r\nSuitbale for heating platen size 1500 x 2800 mm\r\n\r\n1 Bürkle Multi-Pinsystem\r\nFull automatic lower part system for the membraneless coat of milled MDF-parts. \r\n\r\nScope of supply:\r\n1 Pin-block within the BTF incl. all pins\r\n- Pin height: 13 mm\r\n- Pin-Ø: 26 mm\r\n- Pin grid: 35 x 35 mm\r\n2 Matrix-cameras\r\n1 PC incl. Software\r\n1 Switch cabinet wit SPS-control\r\n\r\n1 used Bürkle-Multi-Turning\r\nAutomatical turnin station for foil coated part batches\r\nWith integrated lifting device. Unloading to the length side on the right.\r\n\r\n1 used belt transport (cut station)\r\nExtendible on side for unloading the pressed batch of the Multi-Turning and to cut the parts.\r\nSmooth transport belt.\r\nOvertake of the parts of Multi-Turning: right hand\r\n\r\nElectrical equipment:\r\nTotal supply value: approx. 53 kW\r\nOperation voltage: 400 Volt, 50 Hz, 3 Phasen,\r\n\r\n\r\nNote:\r\nThe specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.\r\n\r\n
2003
Price  
    request
125211194 1001  

HAMBI KSE 602 V for sale
Mat bending machines


1 gebr. Mat bending machines FAbr. HAMBI KSE 602 V = Reinforced version Power: single rod up to 12 mm Width: 6 m =

 

1 gebr. Mat bending machines

FAbr. HAMBI KSE 602 V
=
Reinforced version

Power: single rod up to 12 mm

Width: 6 m
=

 
Price  
    request
125252822 101

HONSBERG Mach 1-HSC500 for sale
Horiz. Double spindle machining center


CNC control Siemens 840 d Verfarwege x / y / z = 1030/ 630 / 500 mm B-axis 360,000 x 0.001 ° ------------------------------------------------------------------- 2-position pallet changer Pallet size 500 x 500 mm  ...
used machine
 
CNC control Siemens 840 d

Verfarwege x / y / z = 1030/ 630 / 500 mm
B-axis 360,000 x 0.001 °
-------------------------------------------------------------------
2-position pallet changer
Pallet size 500 x 500 mm
Max pallet load 300 kg
-------------------------------------------------------------------
Spindle power
Spindle 1 = 24 KW
Spindle 2 = 38 KW
Spindle speeds up to 16,000 1/min
--------------------------------------------------------------------
Tool magazine 60-fach
Tool holder HSK 63
--------------------------------------------------------------------
Rapid 45 m / min

-Exhaust system
-Cooling plant
1999
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Horizontal Machining Center SCHARMANN Ecocut 1.3


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.

Horizontal Milling Machine BURKHARDT WEBER MC 80


X-travel: 1600mm, y-travel: 1000mm, z-travel: 800mm, B-travel: 360°, max. table load: 3t, drive power: 20kW, clamping surface: 2x 800x800mm, with pallet changer.

WIDE BELT SANDER SCM SANDYA UNO CS SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Jig Boring Machine SIP HAUSER MP-54


X-travel: 650mm, y-travel: 450mm, z-travel: 500mm, clamping surface: 770x630mm, max. table load: 500kg, drilling spindle stroke: 160mm, drive power: 5kW.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Cylindrical Grinding Machine TSCHUDIN HTG 430


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.

Grinding Machine DELAPENA SPEEDHONE EM


Working diameter: 1.143-79.375mm, spindle speed: 200-2500/min, motor power: 1.5kW, stroke length: 0-150mm, stroke speed: 60-350double strokes/min, stroke motor power: 0.37kW, length: 1210mm, width: 1210mm, height: 1680mm, weight: 225kg.

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Turning Machines (Lathes) NAKAMURA-TOME TW-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1997 Production hours: 35200 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18-T MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Kamsan Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool

Turning Machines (Lathes) NAKAMURA-TOME W-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1995 Production hours: 1637 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: NAKAMURA-TOME Model: LUCK-BEI MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - IEMCA Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool 4 - Loading Robot

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Turning Machines (Lathes) DMG MORI NLX 2500/500


OVERVIEW: Brand: DMG MORI Model: NLX 2500/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 3171 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2200 mm Measurements depth: 1900 mm Measurements height: 1826 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: DMG MORI ERGOLINE Model: CELOS MAIN DRIVE: X-AXIS movement: 260 mm Z-AXIS movement: 500 mm TURRET: Number of turrets: 1 ADDITIONAL EQUIPMENT: 1 - Power transformer 2 - Tool setter

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Double screw-type extruding machine FANGTAI FT 500-2


Twin-screw FANGTAI FT 500-2 produced in 1998 year. The machine has one screw diameter fi 50 mm and one snail with a diameter of 65 mm. Technical parameters of the machine screw diameter fi 50 mm: -screw diameter: fi 50 mm -L/D ratio of length to diameter of the cochlea: 28:1 -screw speed: 10-120 RPM -foil width: 200-550 mm -film thickness: 0.015-0.04 mm -main engine power: 7.5 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 2.8 t -dimensions (l x w x h): 5600 x 2600 x 1800 mm3 Technical parameters of the machine screw diameter fi 65 mm: -screw diameter: fi 65 mm -L/D ratio of length to diameter of the cochlea: 30:1 -screw speed: 10-120 RPM -foil width: 200-650 mm -film thickness: 0.015-0.04 mm -main engine power: 15 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 3 t -dimensions (l x w x h): 6000 x 1500 x 2500 mm3

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

CNC Bending Machines AMADA RG1030EV3


OVERVIEW: Brand: AMADA Model: RG1030EV3 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 23000 Location: India Country of origin: Japan GENERAL DATA: Measurements width: 2210 mm Measurements depth: 4030 mm Measurements height: 2470 mm Machine weight: 6400 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3100 mm Crowning available: CNC Daylight: 100 mm Throat: 400 mm Main motor power: 7.5 HP CONTROL UNIT: Brand: AMADA Model: NC9 Release: AMNCEv3 MOVEMENT: Backgauge-Z: 450 mm MEDIA: Main electronic connection: 400 V Power consumption: 10 kVA Air pressure: 5 bar Oil tank: 65 L

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Milling machine MICROCUT HBM 4


CNC FANUC 32i MB 2008 power 17.9 Kw table 1200 x 1500 mm Table rotation 360 capacity 5000 kg stroke x 2200 mm stroke y 1600 mm stroke z 1600 mm stroke w 550 mm spindle taper ISO 50 diam. Spindle 110 mm spindle speed 35/3000 rpm Warehouse 60 tools

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

gabion mesh production line HEBEI FAKTORY 60X80 / 4300


Line for manufacturing of grid gabionowej HEBEI ANPING WIRE MESH MACHINE FACTORY 60 x 80/4300 was built in the year 2013. Machine for manufacturing of grid gabionowej, hexagonalnej with the following parameters: -manufacturer: Hebei Anping Wire Mesh Machine Factory (China)-the size of the meshes: 60 x 80 mm -maximum width of mesh produced: 4300 mm -wire diameter: 2.0-2.8 mm -capacity: up to 2.5 mb/min. -weight: 18 tons -engine power: 22 kW

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

BYSTRONIC bystar


Bystronic Bystar 4025 12 meter 6kw Manufacture: Bystronic Type: Bystronic Bystar 4025 12 meter 6kw YOM 2007 Laser on Hours 30,540 Laser working hours 15,809 Sheet Size XYZ 4000mm x 2500 x 150 mm Thickness of Cutting Material Mild Steel - 25MM Stainless Steel -25MM Aluminium - 15MM Power Output 6000 Watts Cutting Heads 7.5” & 5” Comes with Auto change tables, extractor and chiller. Price: Machine Price Ex Works 200.000 euros EX WORKS GERMANY

MILLING MACHINE FIL FIL FSM 300


MILLING MACHINE FIL FSM 300 Category: Milling Machine Type: mobile upright Brand: FIL Model: FSM 300 Capacity: 3500x1000x1250 mm Year built: 2008 FIELD WORK: Longitudinal (x): 3000 mm, vertical (y): 1250 mm Transverse ram (z): 1000 mm CNC CNC: Heidenhain TNC430 SPINDLE Spindle power: 30 kW Rotation speed: 10-3000 Rpm Taper: ISO50 FEEDS: Rapid x: 25 m / min, Rapid y: 25 m / min, Rapid z: 25 m / min ATC Locations: 24 Position: on mast PLAN OF ANCHORAGE Size (lxwxh): 3500x1000 mm Capacity: 15,000 Kg / m HEAD 1 Type: OVER Spindle taper: ISO50 Axle: 180 ° Max speed: 3000 rpm Machine weight: 24700 kg Fridge: yes

Boring Mills STANKOIMPORT 2L614


Boring machine STANKOIMPORT 2L614 produced in 1978. The machine is equipped with measuring, and has upgraded partly electronic. Technical data of boring STANKOIMPORT 2 l 614: -spindle diameter: 80 mm -table dimensions: 800 x 1000 mm -the maximum workpiece weight: 1000 kg -spindle speed: 20-1600 min -engine power: 4.5/6.7 kW -dimensions of the machine: ok. 4300 x 2200 x 2800 mm -weight: 7000 kg

Guillotine Shears STROJARNE PIESOK NTC 2500/4


Guillotine STROJARNE PIESOK NTC 2500/4 produced in 1986 year in Czechoslovakia. The data characteristic guillotine Strojarne Piesok NTC 4 x 2500: -the minimum thickness of cut metal plate: 0.6 mm-maximum thickness of cut metal plate (Rm = 450 MPa): 4 mm-maximum width of cut metal plate: 2500 mm -cutting angle: 1 ' 33 Grad-cutting angle: adjustable -outreach-stand: 200 mm -adjustment range rear bumper: 4-750 mm-main drive motor power: 4 kW -engine power rear bumper: 0.25 kW -infeed bumpers:-dimensions (l x w x h): 3100 x 1600 x 1500 mm-weight: 3800 kg

Eccentric Presses FPA PMS 63 CP


Eccentric press FPA PMS 63 CP produced in 1983 by the Warsaw Factory Machines. FPA press parameters PMS 63 CP: -maximum load: 63 tons -size disc table: 800 x 560 mm -outreach, the table height: 280 mm -adjustable pitch slider: 8-110 mm -diving slider: 65, 85, 110 strokes/min. -maximum number of inclusions in the clutch to intermittent traffic: 20 on/min. -the largest distance slider from the table: 315 mm -the diameter of the hole in the table: 250/280 mm -the self-alignment capacity of slider in the direction of the axis: 90 mm -thickness: 90 mm -hole diameter: 140 mm -slider surface dimensions: 350 x 315 mm -the diameter of the hole in the slider: 40 mm -the ground clearance between the walls of the body: 380 mm -the width of the t-slots: 22 mm -air pressure: 4.5 at -the engine speed: 1500 rpm. -engine power: 5.5 kW -dimensions (l x w x h): 1550 x 1400 x 2650 mm-weight: ok. 6200 kg -an intermediate table -foot pedal -DTR-technical-functional

Fresalesatrice FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Bed milling machine floor type FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Tube Bending Machines TELHOO CNC DW63NC


Pipe Bender TELHOO CNC DW63NC was produced in 2010 year. Complete tooling for bending 15 mm diameter and with different bending radii. The machine is suitable for the spindle (actuator to the introduction and pulling). Characteristic parameters of CNC bending machine TELHOO DW63NC: -diameters of bent tubes: up to 63 mm -the thickness of the wall of bent tubes: up to 4 mm -the maximum bending angle: 190 degrees -bending radius: up to 350 mm -power: 5.5 kW -overall dimensions: 3500 x 750 x 1100 mm -weight: 1500 kg

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

Radial Drilling Machines WRS 25/08


Radial drilling machine WRS 25 produced in 1992. WRS drills specific data 25/08: -the size of the work surface: 660 x 360 mm -the size of the work surface: 860 x 560 mm -dimensions: 1400 x 700 mm -drilling capacity in steel: 25 mm -drilling in cast iron: 30 mm -spindle speed: 65-2880 RPM -the largest travel: 160 mm -the number of feed motor spindle: 6 -distance between the spindle from the table: 10-500 mm -distance between the spindle from the Base: 780-940 mm -radial drilling range: 315-815 mm -motor power: 3 KW -Cone Morsea: MK3 -dimensions (l x w x h): 1460 x 700 x 2300 mm -weight: 1100 kg

PRESSA PER PRESSOFUSIONE IDRA


PRESSES for DIE CASTING HYDRA Hydra BRAND MODEL OL 220 PRP YEAR 1995 DESCRIPTION Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection central extraction Power 180 285 KN KN Max height 550 mm minimum height 180 mm moulds molds 500 mm Race racing mobile plan measures Central ejection stroke 100 mm Dimension 765x765 mm Distance plans within the columns 500x500mm Engine power: 22 Kw total weight 10.2 press Ton 1592x5320x2293 h overall dimensions mm for more details and vision of machinery call us at + 39 030 725026 Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

Die-Sinking Spark Erosion Machine Tools BAOMA DK 7732


An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes. Technical parameters of EDM BAOMA DK7732 E: -working table range: 320 x 400 mm -maximum cutting height: 500 mm -the maximum taper angle: 60 degrees/100 mm -the diameter of the electrode a: 0.14 – 0.22 mm -maximum capacity: 100 mm/min. -the smallest jump interplolacji: 0.001 mm -luz reversible screws of working table: 0.002 mm -positioning accuracy: 0.03 mm over a length of 500 mm -maximum weight of workpiece: 600 kg -power consumption: 2 KVA -external dimensions: 1340 x 1870 x 1670 mm -machine weight: 1800 kg -power supply: 3 x 380V 50 HZ

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.
Get the latest machine offers by email: order newsletter