british flag
Resale Logo

PLC used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Industrierat GmbH  http://www.industrierat.de 
banner logo
start page > keywords PLC > results
776 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
10 11 12 13 14 15 16 17 <  page 18  > 19 20 21 22 23 24 25 26
25606703 1604

STUCKE, HAMBURG Symap for sale
Power Protection, Management, Monitoring System


Available is one complete Power Management, Protection system for Operating of 7 Alternators with young breakers Merlin Gerin Masterpack MW 20 H 1 and Micrologica 6.0 & Terasaki breaker Type Tem Power AT 32. SYMAP®  ...
used machine
 
Available is one complete Power Management, Protection system for Operating of 7 Alternators with young breakers Merlin Gerin Masterpack MW 20 H 1 and Micrologica 6.0 &
Terasaki breaker Type Tem Power AT 32.

SYMAP® Product Overview
SYMAP® is a flexible microprocessor-based digital protection and control device for use in low, medium, and high-voltage power systems. Because of its integrated protection functions and human-machine interface capabilities, it is an efficient and cost-effective solution for all types of switchgears.With three powerful microprocessors, SYMAP® offers complete protection and control functions for generators, motors (synchronous and asynchronous), transformers, power lines, and distributions. All protection functions can be activated simultaneously, and there are no limits in using all of them at the same time.


With SYMAP® , five main breaker controls can be activated with all the necessary functions, such as display, control, and blocking, for optimal breaker management. A small integrated PLC allows individual interlocks of control commands . For flexibility in commissioning and during use, both digital and analog outputs can be used to connect the SYMAP® control unit to main switchboard controls. Additionally, a variety of serial interfaces with different kinds of data protocols can be used for communication between SYMAP® units and the central control system.


For diagnostics and monitoring, SYMAP® has three microprocessors which supervise each other, and providing a watchdog system. Important functions are laid out in a double redundancy combination, operating independently with the second processor. Connected separately, an optional unit for short circuit protection operates parallel to the SYMAP® device and will do so even if the power supply fails.

For contact please contact:
Markus Nehlsen: markus@smedegaarden.net Mob: +45 30701888
or
Morten Smedegaard: m@smedegaarden.net Mob: +45 30701885
2008
Price  
  DK   request
25606619 104

ESTARTA 327 for sale
Centreless Grinding Machines


General Characteristics Ø max. to rectifying 200 mm Dressing Velocidad 255 r.p.m. Maximum length to grinding 500 mm (en plongée) No. speed drive wheel Infinitas Speed 10/255 r.p.m. Width drive wh ...

 
General Characteristics
Ø max. to rectifying 200 mm
Dressing Velocidad 255 r.p.m.
Maximum length to grinding 500 mm (en plongée)
No. speed drive wheel Infinitas
Speed 10/255 r.p.m.
Width drive wheel 500 mm
Width of the grinding wheel 500 mm.
Ø mín.a grinding 3 mm
Ø Muela trawl 355 mm
Ø Work Wheel 650 mm
Electrical Characteristics
Power hydraulic motor 0.37 kW
Total Power 65 kW
Voltage 220/380V
Dimensions and Weights
High 2.100mm
Long 2.300mm
Weight 15.000 kg
Width 2.800mm
Other Features
Included Accessories Portarreglas de pasante, Alimentador automático con PLC Allen Bradley, Equipo MARPOSS de medida del proceso / Automatic feeder with Allen Bradley PLC, Team process measurement MARPOSS,Portarreglas intern
No. Manufacturing 175105
URL Youtube abc://youtu.be/T2SUSkXYlhM
Year 1982
 
Price  
  ES   request
25605619 706

Hormes GmbH & Co. KG Typ 7000 for sale
Degassing and Carbonation Unit


- 2-stage CO2 pressure degassing and carbonation - stainless steel pumps - consolidated design with minimum space requirements, mounted on SST rack - CIP able - SST switch cabinet mounted directly on framework - P ...
used machine
 
- 2-stage CO2 pressure degassing and carbonation
- stainless steel pumps
- consolidated design with minimum space requirements, mounted on SST rack
- CIP able
- SST switch cabinet mounted directly on framework
- PLC Siemens S7/300 controller, Siemens touch panel in the front door of the
control cabinet
- electrical connection value: 230/400V, 50 Hz, control voltage 24V DC.
- base frame dimensions: 2,000 x 1,800 mm.
- digitized documentation included
2013
Price  
  DE   request
25585773 104

ESTARTA 301 for sale
Centreless Grinding Machines


General Characteristics Ø max. to rectifying 50 mm Dimension tooth 300 x 175 x 125 mm Plongée Auto 125 mm max. Width drive wheel 220 x 125 x 125 mm Width of the grinding wheel 125 mm Ø mín.a gr ...

 
General Characteristics
Ø max. to rectifying 50 mm
Dimension tooth 300 x 175 x 125 mm
Plongée Auto 125 mm max.
Width drive wheel 220 x 125 x 125 mm
Width of the grinding wheel 125 mm
Ø mín.a grinding 1,5 mm
Ø Work Wheel 300 mm
Electrical Characteristics
Total Power 7,5 Kw
Dimensions and Weights
High 1.260 mm
Long 1.520 mm
Weight 1.600 Kg.
Width 1.020 mm
Other Features
Included Accessories Cargador para piezas plongee, Plongee hidráulico, Compensador de diamantado, PLC SIEMENS, Engrase centralizado automatico,/ Plongee charger parts, hydraulic Plongee, diamond compensator, SIEMENS PLC, automatic lubrication system,
No. Manufacturing 801858
Year 1992
 
Price  
  ES   request
25585667 104  

MVM FX20 for sale
Round Table Flat Grinding Machines


General Characteristics Advances wheelhead 1 / 30 m/minutos Height to rectify 155 mm Maximum length to grinding 2100 mm Ø Tool 200 mm Electrical Characteristics Motor power wheelhead 15 Kv Dime ...

 
General Characteristics
Advances wheelhead 1 / 30 m/minutos
Height to rectify 155 mm
Maximum length to grinding 2100 mm
Ø Tool 200 mm
Electrical Characteristics
Motor power wheelhead 15 Kv
Dimensions and Weights
High 1900 mm
Long 4750 mm
Weight 3500 kg
Width 1300 mm
Other Features
Included Accessories Engrase centralizado, Equipo de refrigeración con filtro de papel, Panel de control y PLC SIEMENS /Central Lubrication, cooling equipment with filter paper, Control Panel and PLC SIEMENS
No. Manufacturing ID 3254.8
 
Price  
  ES   request
24099336 1300  

ZHUOSHEN, FOSHAN, JINAN 4-HI NON-REV. ROLL MILL for sale
ALUMINIUM STRIP PRODUCTION LINE


No. Item Make Qty. 1 Second-hand LPG / Furnace oil fired top charging 25 ton Melting furnace Built: 2012 Zhuoshen 4 Nos. 2 Second-hand LPG / Furnace oil fired 16 ton Holding furnace Built: 2012  ...
used machine
 
No. Item Make Qty.
1 Second-hand LPG / Furnace oil fired top charging 25 ton
Melting furnace Built: 2012 Zhuoshen 4 Nos.
2 Second-hand LPG / Furnace oil fired 16 ton Holding
furnace Built: 2012 Zhuoshen 4 Nos.
3 Second-hand Tilting twin rolled continuous strip casting
machines Built: 2012 Zhuoshen 4 sets
4 Second-hand 4 â Hi non reversing cold rolling mill with
Achenbach Optiroll i2 system (AGC / AFC) Built: 2012 Zhuoshen 1 No.
5 Second-hand Inert Gas radiant tube Annealing furnaces for
coils with common charging car. Built: 2012 Shengmao 4 Nos.
6 Second-hand slitter Strip width: 1750 mm
Thickness: 0.2 â 2.0 mm Speed: 590 m/min. Stamco 1 No.
Revamped in 2013 â PLC, Hydraulic by ABB
7 Second-hand Cut-to-length line with flying shear, double stacker
suitable for 1650 mm width. Built: 2012 Foshan 1 set
8 Second-hand circle punching machine Strip width: 1650 mm
Built: 2013 Type: CNC-Circle punching machine Jinan Songsheng 1 No.
Thickness: 0.5 â 4.0 mm
2012
Price  
  DE   request
22649697 708

BITZER OSKB 7061/5361 for sale
Screw compressor plant


BITZER OSKB 7061/5361 Product number:M15-6047 Cooling capacity:44 kW Refrigerant:R22 Refrigerant Content:140 kg Voltage:400 Volt Power consumption:40 kW Motor power:18,5 / 26 kW Weight:4000 kg Year:1994 Numbe ...
used machine
Quantity: 2
 
BITZER OSKB 7061/5361

Product number:M15-6047
Cooling capacity:44 kW
Refrigerant:R22
Refrigerant Content:140 kg
Voltage:400 Volt
Power consumption:40 kW
Motor power:18,5 / 26 kW
Weight:4000 kg
Year:1994
Number in stock:2 piece(s)

Two complete Bitzer two-stage compressor installation, built in a weather proof containerized housing, existing out of two Bitzer compressor type OSKB7061 en OSKB5361, working on refrigerant R22. This installation is equipped with : 2x oil separator(HP and LP), liquid receiver, pressure gauges, safety switches, control panel with PLC and a fitting condenser. This is a perfect installation for a blast freezer or spiral freezer!


Please visit also our website: used-refrigeration
1994
Price  
  NL   request
22649547 708

BITZER OSKB 7051(2x) / OSK 5361 for sale
Compressors


BITZER OSKB 7051(2x) / OSK 5361 Product number:M15-1105 Cooling capacity:66 kW Refrigerant:R22 Refrigerant Content:175 kg Voltage:400 Volt Motor power:18,5 (2x) / 26 kW Weight:4200 kg Year:1994 Number in stock ...
used machine
Quantity: 2
 
BITZER OSKB 7051(2x) / OSK 5361

Product number:M15-1105
Cooling capacity:66 kW
Refrigerant:R22
Refrigerant Content:175 kg
Voltage:400 Volt
Motor power:18,5 (2x) / 26 kW
Weight:4200 kg
Year:1994
Number in stock:2 piece(s)

Two complete Bitzer two-stage compressor installation, built in a weather proof containerized housing, existing out of two Bitzer compressor type OSKB7051 and one type OSK5361, working on refrigerant R22. This installation is equipped with : 2x oil separator(HP and LP), liquid receiver, pressure gauges, safety switches, control panel with PLC and a fitting condenser. This is a perfect installation for a blast freezer or spiral freezer!


Please visit also our website: used-refrigeration
1994
Price  
  NL   request
22304811 109

VEI-ENGINEERING VEI_HO_GB for sale
Drying Ovens


Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: appr ...

 
Gas-heated bogie hearth drying oven
(not for flammable paint)

temperature max.: 420°C
burners heating power:300 kW divided on 2 burners / zones
circulation fans: 2 x 5,5 kW = 11 kW
el. total connected load: approx. 15 kVA
control zones: 2
PLC: Siemens S7
approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm
length with extended bogie hearth: 11.000 mm
internal dimensions (without bogie hearth)
width: 4000 mm
hight: 2900 mm (2500 mm usable with bogie hearth)
lenght: 4000 mm
max. charging weight:20.000 kg net
 
Price  
  DE   request
22091019 304

ILLIG RDM 42/ 3 for sale
Thermo forming machines


Used ILLIG RDM 42/3 Lid/Shallow parts Thermoformer. Reconditioned in September-2015 (In stock at our Warehouse in Billund, Denmark) Double Unwind Stand Trio Motion Technology Servomotor Indexing Photo Cell System fo ...
used machine
 
Used ILLIG RDM 42/3 Lid/Shallow parts Thermoformer.
Reconditioned in September-2015
(In stock at our Warehouse in Billund, Denmark)
Double Unwind Stand
Trio Motion Technology Servomotor Indexing
Photo Cell System for running pre-printed film
Double Heater, updated OMRON PLC Temperature Controls.
AC inverter Main drive with Encoder
ABB PLC Controls
470 mm Max Feed Width
450mm x 160mm Max Forming Area
30 mm Max Draw
165mm Max feed length
Dry Cycle Speed Circa 58 cycles/ min
Counter/ Stacker Unit with Arm to bring Counted/ Stacked Products automatically
down to the Stainless Steel Delivery Table
 
Price  
  DK   request
21918910 708

FRIGOSCANDIA GCM 9/3-10-35-32-NN-CR for sale
Spiral freezers


FRIGOSCANDIA GCM 9/3-10-35-32-NN-CR Product number:M15-5006 Cooling capacity:400 kW Number of fans:3 Refrigerant:NH3/CO2/Freon Voltage:400 Volt Motor power:75 kW Year:2004 Number in stock:1 piece(s) A very n ...
used machine
 
FRIGOSCANDIA GCM 9/3-10-35-32-NN-CR

Product number:M15-5006
Cooling capacity:400 kW
Number of fans:3
Refrigerant:NH3/CO2/Freon
Voltage:400 Volt
Motor power:75 kW
Year:2004
Number in stock:1 piece(s)

A very nice Frigoscandia spiral freezer. Model GCM 93-10-35-32-NN-CR with a product capacity of +/- 4.000 kg/h (depending on type of product and inlet temperature). In/outfeed configuration is North/North. Infeed height= 980 mm, outfeed height= 4756 mm. Belt rotation is clock wise, belt width gross = 920 mm, belt width net = 875 mm, max product height = 80 mm, numbers of tiers = 35 tiers. This Frigoscandia spiral freezer from 2004 has only been used for 4 years and during this 4 years, only one day a week. The freezer is executed with a S.S. control box with Siemens PLC. The most complete CIP cleaning system, large evaporator coil (1800 m2), 3 ventilators (18 kW each), water defrost and the freezer will be delivered with stainless steel floor. Insulating panels are not included, but can be offered by VRT on request.


Please visit also our website: used-refrigeration
2004
Price  
  NL   request
21807553 1001  

SCHLOSSER SP 3000 for sale
Concrete block machine


2nd hand Blockmakingplant SCHLOSSER SP 3000 Capacity: up to 1500 m² pavers/interlocks or up to 15.000 blocks 400 x 200 x200 mm per 8 hours production shift year of construction 2000, pallet size 1250 x 950 x 50 mm. ...
used machine
 
2nd hand Blockmakingplant SCHLOSSER SP 3000
Capacity: up to 1500 m² pavers/interlocks or up to
15.000 blocks 400 x 200 x200 mm per 8 hours production shift
year of construction 2000, pallet size 1250 x 950 x 50 mm.

Stationary blockmachine SP 3000 with facemix unit, make Schlosser,
For the manufacture of pavers with and without facemix,
Including:2nd feeding device
Variable electronic Vibration system
Electric control; Siemens S7 PLC

Fully automatic circular plant:
2.1 Chain conveyor wetside
2.2 Rotating brush for fresh products
2.3 Chain elevator 10 stages, 300 mm stage distance, 2 pallets per stage
2.4 Finger car 10 stages, 300 mm stage distance, 2 pallets per stage
2.5 Collecting frame 10 stages, 300 mm stage distance, 2 pallets per stage
2.6 Chain lowerator 10 stages, 300 mm stage distance, 2 pallets per stage
2.7 Pallet advance device dryside.
2.8 Block precompacting and doubling device
2.9 Cubing plant, 4-sided clamp
2.10 Stillage magazine
2.11 Slat conveyor 25 meters
2.12 Signode vertical strapping device
2.13 Signode horizontal strapping device
2.14 Film dispenser
2.15 Pallet brush
2.16 Pallet turning device
2.17 Pallet stacking device
2.18 Pallet cross conveyor trolley with pallet buffer
2.19 Approx. 2000 wooden pallets 1250x950x50 mm
2000
Price  
  DE   request
21480006 404

PESTER Pewo-form UVP3 for sale
Case packer


Automatic case packaging machine. Machine comes with input-/output conveyor belt incl. kipping station, PLC Lenze and other accessories.
used machine
 
Automatic case packaging machine. Machine comes with input-/output conveyor belt incl. kipping station, PLC Lenze and other accessories.
2004
Price  
  CH   request
21480000 401

OPTIMA FRA 1D / SDM20 for sale
Filling equipment for powder


Intermittent powder filling and closing machine with powder dosing unit and a screwing unit of the dosed bottles with corresponding screw alimentation from vibrator. Incl. format parts for 60, 100, 150 and 250 ml (ca. Ø ...
used machine
 
Intermittent powder filling and closing machine with powder dosing unit and a screwing unit of the dosed bottles with corresponding screw alimentation from vibrator. Incl. format parts for 60, 100, 150 and 250 ml (ca. Ø 50-60 mm) bottles, alimentation infeed conveyor, outfeed conveyor, PLC Siemens type S5 etc. Output: up to 70 units/min.
1999
Price  
  CH   request
21131891 1300  

SISTEM TEKNIK, YSS, MINGG INGOT: 1000 x 1000 x 500 for sale
ALUMINIUM INGOT CASTER PLANT


Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging mater ...

 
Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElectrical vibration system for dirt removalQty. 1 Melting furnaceMfc.:Sistem TeknikType:SAMHF-6 Stationary Alu melting/holding furnaceNatural gas 6 ton melting furnaceMade in Europe CE standard of quality and pollution controlCasting capacity of 20 ton of aluminium per dayPLC automatic control unit including HMI system †Siemens?Qty. 2 proportional control gas burnersHydraulic unit for door lifting include pneumatic door clampWide charging door for easy material loadPressure controlled Chimney, to reduce energy waistFume hood and suction chimney automatic operatedRefractory of furnace manufactured by CALDERYS Casting systemMfc.:Sistem TeknikType: Manual rotationCapacity:5 -6 ton per cast10 units of PYROTEK sow/ingots moldsQty. 2 spare molds2 furnace molten aluminium exit control by auto pneumatic systemReplaceable cones for each cast for easy and clean material flowMaterial flow can be controlled electrical/ pneumatic5 meter long launder in axis system and manual drivenHeating torches for molds and launder preheatingFast casting system, 15-20 minutes of full load castingDe-coater machineMfc.:MinggongType: ADEX STYLECapacity:1 ton/ hour decoating machineDecoating temperature up to 800 °C in burner chamber, 600 °C in drumPLC automatic control unit including HMI systemHeating by natural gas burner systemDesign of system IDEX style, utilize and burn the gases before exhausting to chimney, this way gaining energy and reduce pollutionDrum speed can be adjusted by speed controllerHeat ramp and air control is automatically adjusted by speed controllerChimney opening is pressure controlled to reduce energy waistMaterial in feed via conveyorsHydraulic balerMfc.:YSSType: Manual operation hydraulic valvesCapacity:1 ton/ hour Qty. 1 hydraulic main pumpHydraulic valves with manual control systemEasy and simple to useARUN Mass spectrometerMfc.:Polyspek ARUN mass spectrometerComing with operation system build in with touch screenCompact size, fit on deskStandard factory calibrated programsNo vacuum pump neededHigh-resolution argon flushed optical systemHigh-resolution CCD with 100,000 I PixelsSolid-state spark sourceNATURAL GAS GENERATORMfc.:BS PowerPower:320 kVA Type:natural gas generatorClean and cheap means of energyCan be manual operated or controlled by nepa holdCummins motor
 
Price  
  DE   request
21088898 109

VEI-ENGINEERING VEI DLO_GB for sale
Continuous hardening furnace


Continuous hardening furnace external dimensions (w x h x l): approx. 2170 x 2320 x 7700 mm heated length: 4100 mm belt width: 470 mm electrical power consumption: 45 kVA total heating power: 150 kW (through 3 rec ...
new machine
 
Continuous hardening furnace

external dimensions (w x h x l): approx. 2170 x 2320 x 7700 mm
heated length: 4100 mm
belt width: 470 mm
electrical power consumption: 45 kVA
total heating power: 150 kW (through 3 recuperative burners)
temperature: max. 950°C
temperature control zones: 3
belt speed: 12 min. – 360 min.
through output: approx. 250 kg/h
protective gas consumption: approx. 8 Nm3/h
PLC: Siemens S7
new
Price  
  DE   request
21054969 1300  

SCHLOEMANN - SMS 4000 MT - 8 - 12 for sale
EXTRUSION PRESS LINE - 4000 MT


Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application i ...
used machine
 
Qty. 1 Second-hand extrusion press line
Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT
The press was used in the brass and copper application. The press has been reconstructed and
changed to aluminium application in 2005.
Before the production has been stopped was the press in excellent condition.
The plant has been stopped in 2010 due to ecenomical situation.
Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm
Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head)
Exit sıze of and plate: 500 mm
Scope of supply:
Feeding system Billet furnace Extrusion press
Run aut table 45 mt long Cooling table (belt type )
Strecher force: 200-300 ton Die oven
Finsihing table and saw
Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER
Hot saw Operation desk PLC type (need sone maintenance) SÄ°EMENS
2 pieces steam dumany block Containers dia.: 203 †228 †245 †254 mm
Various spare parts and tools
1980
Price  
  DE   request
20918371 109

VEI-ENGINEERING VEI DLO_EB for sale
Furnaces


electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temp ...

 
electrical heated tempering continuous furnace

external dimensions:
lenght: 3900 mm
width: 1320 mm
height: 1090 mm (above base frame)
muffle lenght: 3960 mm
max. furnace area temperature: 750°C
max. temperature inside the muffle: 700°C
water cooled ventilators : 3

electrical connected loads:

three-phase: 3 x 400 V, 50 Hz
power consumption: 75 kVA
heating power, 3 zones each: 24 kW = 72 kW

PLC : Siemens S7
 
Price  
  DE   request
20857638 709

STORK midi Sterideal for sale
UHT plant


Complete multifunctional Stork Sterideal UHT plant. capacity variable, max 1500 lt/hr. suitable for sterilising both high and low viscous products. Suitable for both indirect heating with tubular heatexchanger and dir ...

 
Complete multifunctional Stork Sterideal UHT plant.
capacity variable, max 1500 lt/hr.
suitable for sterilising both high and low viscous products.
Suitable for both indirect heating with tubular heatexchanger and direct heating by means of direct steam injection.
Including homogenizer, 300 bar, 2 stages.
including built-in 300 litres sterile tank.
year of manufacture 2000.
Allan Bradley PLC control,
Danfoss frequency converters.
Samson control valves.
Fristam pumps.
E+H flowmeters.
Includes full documentation
plant comes from an R&D laboratory, very good condition.
 
Price  
  NL   request
20257117 1004

PROMETAL Batching plants for sale
Concrete mixing systems


From small through medium to big concrete batching plants Prometal presents most efficient ways of production of concrete with great results of high quality concrete. Our customers can choose between 15 cubic meters  ...
new machine
 
From small through medium to big concrete batching
plants Prometal presents most efficient ways
of production of concrete with great results of high
quality concrete. Our customers can choose between
15 cubic meters per hour to 120 cubic meters
per hour concrete batching plants. Long lasting
structures and stable design provides our customers
long term profitable investment with no regrets.

Aggregate bunker is designed and manufactured
to operate under heavy working conditions for a
long time. There are 2 electro-pneumatically controlled
discharge gates, which provide easiness
and choice in the discharge together with suitable
elevation. Aggregates are weighed by 4 units of
load cells.

Electric installation of concrete batching plant
includes all electrical connections of voltage,
controlling and part for measuring of the plant. All
installations and safety devices are made by EC
regulations, protection IP 67, both way of work,
manual or automatic. Controlling of whole plant
is done by PLC Siemens controller which gives
returning connections of the system which are part
of safety demands.

The cement silo is an integral piece of equipment
of any concrete batching plant. Large variety of
cement silo sizes provides to our customers right
equipment that can suit small to big production of
concrete. Cement screw conveyors are manufactured
by WAM Italy as well as other cement silo
equipment.

Equipment which composes concrete batching plant:
• Concrete mixer (turbine, planetary or twin-shaft)
• Platform steel structure (made and designed by customer needs)
• Mixer feeding conveyor
• Aggregate bunkers with weighing belt conveyor adapted to size of concrete batching plant
• Cement weighing hopper
• Water weighing hopper
• Additive system for dosing additives
• Cement silos with silo-top filter and cement screw conveyors
• Electric installations and controlling of batching plant with PLC Siemens controller
• Insulated control room
• Insulation construction from sandwich panels with sub construction for winter execution
• Many more equipment per customers demand.
new
Price  
  RS   request
<  page 18  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter