847 offers

New in: used
Price: 35.000 €
Location: Land-at AT
Seller: Mr Winter

Atomatische hem saw with EWD DK90 - DendroMaskin feed table Board length 1-6m Board width of min. 45 mm of to 550 mm (bore 800 mm) Cutting height up to 160 mm feed from the right + Splinters separator with 2 blades + Pull-out roles for page items PLC SIMATIC S5 full modular Performance: Approx. 11 boards per minute selection:-NG 4-55 cm -Fixed widths of all kinds -Lattenschitt -Fixed widths + slats -Cut can be retrofitted more

New in: 2005
Price: request quote
Location: Land-at AT Zwettl
Seller: Mr Winter

Discharge stack, measurement, Sprtier, crosscut and stacking machine SPRINGER modular design in a small sawmill little used, almost as good as new as a result of the small envelope amount (approx. 600 h) Wood length: 3-5m increments (fixed modules) 500 mm or infinitely adjustable Stack dimensions: task: stack width up to 1900 x 1300 mm loss: "Single stack" stack height 1300 mm / easy stack 1200 mm Maximum weight of wet goods 5000 kg 5000 kg Board dimensions: Board widths of at least 80 mm up to 450 mm Board thickness of at least 18 mm up to 120 mm Small ester wood cross section 18 x 80 mm Largest wooden cross section 60 x 300 mm Capping: The maximum cutting height of crosscut saws ... more

New in: 1997
Price: request quote
Location: Land-nl NL
Seller: Van Zutphen BV

Used and in very good condition, Kaak Twin spiral freezer with a producing capacity depending on the product data (based upon 1000 pcs of cream cakes of 2500 grams each) approximately 2500 kg/h. Spiral freezer is largely made of stainless steel/aluminium with the exception of the drums (which are hot-dip galvanized). Infeed/outfeed North/South configuration. Infeed/outfeed height 800 mm, stainless steel Ashworth belt B26-12-17 with integrated metal side conduction, belt width gross 762 mm, net 648 mm, effective belt length 648 meters, number of tiers per drum 21, 42 in total, inside diameter of drum 3353 mm, outside diameter 4877 mm, maximum height 5255 mm, maximum product height 125 mm  ... more

New in: 1989
Price: request quote
Location: Land-de DE Kleinostheim
Seller: WEMA SERV

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch scre ... more

New in: 2012
Price: request quote
Location: Land-no NO Myre
Seller: Normar Trading

Man.year: 2012 Condition: Excellent MSC horizontal slicer The MSC 650-45 is the fastest and most advanced horizontal slicer on the market offering automatic in-line and continuous production. The machine is operated by one person, and it is simple, fast and safe to operate with automatic clamping of the fillet, and automatic in-feed and out-feed conveyors for the fillets. This feature means it can easily be integrated in to a production line, with a trimming station before and a packing line after slicing. The capacity is approx. up to 120 kg/hour by 1 kg fillets with a slice thickness of 2.4 mm. The slicer is solely electrical driven. The slicer has been built according to the design  ... more

New in: 2010
Price: request quote
Location: Land-de DE
Seller: USED GERMAN MACHINES

Krones Checkmat 731S with reject Capacity: 320 cans/min (99 mm), 165 cans/min (127 mm) Format: diameter: 99 x 123 mm, diameter: 127 x 165 mm Make: Krones Model: Checkmat 731S with reject Condition: very good used condition Year of make: 2010 Type: single Frequency: 50 Hz - 1 kW Control unit: Felx I/O, PLC: Guardlogix L61S Remarks: Compressed air requirement Felx I/O, PLC: Guardlogix L61S. Equipment is complete, with manual, electrical diagrams and CE declaration (hardcopy and CD) in German language more

New in: 1989
Price: request quote
Location: Land-de DE
Seller: USED GERMAN MACHINES

Alfa Laval® Steritube UHT plant This machine is in full working condition and was previously used for UHT milk and UHT cream. Capacity: 6.500 to 13.000 lph Model: Steritube M10-MFMC Make: Alfa Laval® Suitable for: UHT milk, UHT cream Year of make: 1989 PLC: Siemens S5, S7 conversion available on demand Total no. of tubes: 70 Total pressure drop for product (bar): 11 Steam consuption (KG/1000 L product): ~ 45 Maximum temperature: 137°C Location: UGM stock Germany Optional services: - Packaging, shipping - Installation, commissioning and start-up at buyer's site - Staff training more

New in: 1987
Price: request quote
Location: Land-at AT
Seller: NOWOTECMA GmbH

2 x 4.000 n/m - 1.500 rpm - incl. new brushes We intend to make the following upgrades. 1) new electrical control (incl. PLC) 2) pneumat. needleboard clamping (currently the machine has manual eccentric clamp ) 3) new drives for take-off roll. 4) one new set of brushes. 5) repaint (color request of the buyer) 6) electrical rewire. 7) test run before delivery. ready to start work, delivery time approx. 3 months after order confirmation. Photo shows a machine on which we did a complete refurbishing last year. more

New in: new
Price: 29.900 €
Location: Land-de DE Nordrhein-Westfalen
Seller: In.Ha.TEC Vertrieb & Service UG

Brand new horizontal flow wrapper ILAPAK, type: Smart for various purposes. -Machinengeschwindigkeit: up to 100 beats / minute -Single sealing: up to 200 beats / minute -Double sealing JAWS: 150 mm -All data are product dependant Roll weight: 40 kg (88 lbs) Panel: industry PLC El. Connection: 220/480V, 3ph, 50/60 Hz, 5kVA Air pressure: 6 bar, 1 l / min Machine weight: 850 kg Standard execution of the machine: -PLC-controlled form, fill and seal machine (HFFS) with rotating seal plates -Multi-Ah-motor with 3 independent drive units -AC motor controlled by a frequency converter for the product inlet, seal rollers and the rotating sealing JAWS -Control Panel with TFT touchsc ... more

New in: 1987
Price: request quote
Location: Land-de DE Plettenberg
Seller: turn-tec Produktion & Service GmbH

Schütte SF 26 DNT multi spindle automatic lathe 6 spindles built in 1987 in DNT execution = adjustable stepless speed and cycle time by servo motor Facilities: -Thread cutting gear (on request) -PLC control -Magnetic tape conveyors -Drive to the polygon attachement -independent feed on layer 1 more

New in: 1991
Price: request quote
Location: Land-de DE Meinerzhagen
Seller: turn-tec Produktion & Service GmbH

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more. more

New in: 1989
Price: request quote
Location: Land-de DE Plettenberg
Seller: turn-tec Produktion & Service GmbH

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc. more

New in: 2011
Price: 30.500 €
Location: Europa - Italien
Seller: MISCHI KURT

WOOD BRIQUETTING PRESS COMPLETE WITH CLOSED REFRIGERATING SYSTEM FOR THE OIL AND FOR THE EXTRUSION PIPE The machine can press dry chips, sawdust and powders (min. 8/ max. 17% moisture). MACHINE APT TO PRODUCE VERY HIGH QUALITY BRIQUETTES. STANDARD ACCESSORIES: Machine with manual and automatic cycle. Production 200÷350 Kg./H. This details is unbinding and depends on the specific weight and consistency of the material. 2 Motor pumps (KW 11X 2/HP 15 X 2 380V 50HZ) Briquette Ø 75 mm. Electrical control board with electronic PLC and amplified connectors. Material level feeler. No. 14 cycles/min. Gear motor KW 1,5/HP 2. Chips\' container ø 1200. Press power rate abou ... more

New in: 1993
Price: request quote
Location: Land-de DE
Seller: Bautex Handels GmbH

New scanner and PLC in 2012 In the year 2012, new scanner, new PC system, new PLC was incorporated control SIEMENS S 7. Maximum Board length up to 5 m The system consists of: 1. stock cross conveyor for side boards and battens and rind 2. separation of Board 3. cross conveyors with compound miter saw, zero line 4. transfer table in front of the scanner - system with centering alignment for cheat sheets boards 5. scanner - system for measuring control at the entrance, year 2012, with PC control 6 conveyor belt between scanner and be Mule 7 be hemmer CATECH 6000 Feed up to 150 m / min Main engine 90 KW Automatic blade adjustment for measurement of PLC 8 Spreiselabscheider with conveyor belt ... more

New in: new
Price: request quote
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

We offer: new hydraulic and PLC controlled automatic filter - presses, for the separation of solid and liquid substances in different areas of performance. Filter surface from 30 to 1000 m2, with Chamber volume of 460 to 20 000 litres, pressure 0.6 mpa. Please let us know which materials are to be pressed more

New in: new
Price: request quote
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

We offer: new hydraulic and PLC controlled automatic filter - presses, for the separation of solid and liquid substances in different areas of performance. Filter surface from 30 to 1000 m2, with Chamber volume of 460 to 20 000 litres, pressure 0.6 mpa. Please let us know which materials are to be pressed more

New in: new
Price: request quote
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

We offer: new hydraulic and PLC controlled automatic filter - presses, for the separation of solid and liquid substances in different areas of performance. Filter surface from 30 to 1000 m2, with Chamber volume of 460 to 20 000 litres, pressure 0.6 mpa. Please let us know which materials are to be pressed more

New in: new
Price: request quote
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

We offer: new hydraulic and PLC controlled automatic filter - presses, for the separation of solid and liquid substances in different areas of performance. Filter surface from 30 to 1000 m2, with Chamber volume of 460 to 20 000 litres, pressure 0.6 mpa. Please let us know which materials are to be pressed more

New in: new
Price: request quote
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

We offer: new hydraulic and PLC controlled automatic filter - presses, for the separation of solid and liquid substances in different areas of performance. Filter surface from 30 to 1000 m2, with Chamber volume of 460 to 20 000 litres, pressure 0.6 mpa. Please let us know which materials are to be pressed more

New in: used
Price: 39.000 €
Location: Land-at AT
Seller: Haba Verpackung GmbH

Absolutely mint condition virtually unused Previous application: PRODUCT: fresh not together hanging bread BAG/quantity: 10 PCs / bag FILM: Heißsiegelfähige PP flat foil from the roll perforated and unperforated BAG shape: tube bag on the back of middle of longitudinal seam FORMATS: F 300 (bag width) 300 mm flat slide 630 CAPACITY: up to 30 bags per minute Shell fabric: flat sheet from the roll in hot-sealing design Shell fabric role: Max outer diameter 350-400 mm Core diameter: Standard 70-76 mm Base machine: Working range: 100 to 300 mm bag width 0 to 500 mm bag length Normal steel, painted RAL 1013 All wetted parts made of stainless steel or food-resistant plas ... more

New in: 2014
Price: 39.500 €
Location: Land-de DE
Seller: ABS Schwabe Germany

Decoiler double reel double lab winding reel model AHMD2.0H Manufacturer: ABS Schwabe Germany. It's a demonstration machine: Bandwidth at 1.5 t = 600 mm Bandwidth at 2.0 T = 400 mm The reel with the corresponding coil weight may be charged depending on the bandwidth. -Stable base frame in welded bolt steel - shooting wreath storage with pneumatic locking - procedures establishment with crank spindle for band-middle-centering -Hydraulic spread with hand pump, can be converted to electric hydraulic -Spreader range 350-600 mm -Thornless version for free loading with ABS-Patent-Expansion vertically from behind about 3 hydraulic cylinders with mechanical forced centering -Drive gear ... more

New in: used
Price: request quote
Location: Land-pl PL Bielsko-Biala
Seller: inter-wiba Sp. J.

Producer: GSP Type: 65 ST RBB The GSP 65 TR-E is an industrial machine dedicated to packing products by flushing gas or spraying on preserving aromas.It is specifically indicated for large, high or in chain products, also using poleyethylene / polyolefin film. The transversal, box motion, electronically controlled sealing unit guarantees fast changeover and, on demand, gusseted and square shaped packages. The long-time sealing system combined with a low inertia leverage guarantees airtight sealing, putting high pressure on film. This system is ideally applie in the technical product sector, to welding film like polyolefin and polyethylene. On demand, package can have bead seals. The  ... more

New in: 2000
Price: request quote
Location: Land-nl NL
Seller: ERMI HOLLAND B.V.

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane. more

New in: 2000
Price: request quote
Location: Land-nl NL
Seller: ERMI HOLLAND B.V.

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane. more

New in: 2012
Price: request quote
Location: Land-de DE Dortmund
Seller: VEI-Engineering GmbH

useable dimensions (bogie hearth): depth: 3.200 mm width: 2.700 mm height: approx. 1.100 mm max. temperature: 1200 °C heating groups: 6 heating power: 810 kW drive systems bogie hearth: 2 number of control groups: 3 PLC: Siemens S7 more

New in: 2001
Price: request quote
Location: Land-uk UK
Seller: IPR-PETMachinery

Trine 4700 Roll Fed Labeller, year 2001 Currently used to label 2? composite cans Features : Quick change roll feed labeler 240 v ac Plc controlled Output Capacity : 250 to 300 bpm Downstream and upstream sensors Touch pad operator’s control Includes full manual and parts list The labeller is in good condition, well maintained. it can be inspected in running condition. more

New in: new
Price: request quote
Location: Land-no NO
Seller: Normar Trading

Tank capacity: 1000 L Fish size range: dead fish up to 6 kg Max. Suction height: 9 m Max. Pressure height: 18 m Compressor: Samson KL350 15 kW- 50 Hz Power Supply: 3 x 400 V 50 Hz Water Supply: 15 l/min at 2 bar Capacity : 95 m3 /hour max (depending on pumping factors) Commentary: Vacuum tank in stainless steel with 10'' (250 mm) in- and outlet with non-return valve. The in- and outlet is designed with "easy change of flapper system" for quick inspection/ changing of the flapper valves. The tank has lower and upper level sensor for automatic control of filling and emptying. Flow-watch for controlling supply water with automatic shut down by cooling supply w ... more

New in: 2016
Price: request quote
Location: Land-no NO
Seller: Normar Trading

Tank capacity: 250 L Fish size range: dead fish up to 2 kg Max. Suction height: 9 m Max. Pressure height: 18 m Compressor: Samson KE180 7,5 kW- 50 Hz Power Supply: 3 x 400 V 50 Hz Water Supply: 10 l/min at 2 bar Capacity: 40 m3/ hour max (depending on pumping factors) Commentary: Vacuum tank in stainless steel with 6'' (150 mm) in- and outlet with non-return valve. The in- and outlet is designed with "easy change of flapper system" for quick inspection/ changing of the flapper valves. The tank has lower and upper level sensor for automatic control of filling and emptying. Flow-watch for controlling supply water with automatic shut down by cooling supply water ... more

New in: 1988
Price: request quote
Location: Land-de DE
Seller: Bach Machines

Control: PLC wheel width Max: 120 mm wheel diameter - Max: 500 mm module - maximum: 8 table diameter: 500 mm Helix angle max.: 41 degrees distance table Stosspindel: 0-355 mm table bore: 120 mm Stpindelhub - Max: 110 mm space requirement approx.: 2510 x 1470 x 1995 mm speed: 20-200 power: 15 kVa completely overhaul 11/2014, completely rebuilt new plc, new motors, cables fixed to the Cabinet on HARTING connectors , Change gears. more

New in: 1999
Price: request quote
Location: Land-de DE Bayern
Seller: WEMA SERV

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up more

New in: 2016
Price: request quote
Location: Land-tr TR
Seller: Patrol Makina

MWZ 1620Q Lead Edge Feeder Automatic Die Cutting Model MWZ1620Q Max. paper size 1650×1210 mm Min. paper size 650×550 mm Max. cutting size 1620×1190mm Max. cutting pressure 300 ton Corrugated Board Thickness ?9mm Cutting pression ±0.8mm Maxmechanical speed 3600s/h Cutting rule height 23.8mm Pressure adjusting range 0-3mm Min. front margin 10mm Inner chase size 1646×1220mm Tower power 34.7kw Machine dimension 8895x5241x2295 mm Total weight 27t Control system PLC control system Power 400V±5%, triphase, 50Hz Working environment temperature -10?~40? Humidity Less than 50%@40°C or 90%@20°C Altitude up to 1000 m above mean sea level Air compressor d ... more

New in: 1992
Price: request quote
Location: Land-PK Pakistan, 0 Gujranwala
Seller: Used Sweden Machines

Tetra Pak TBA 9 200ml Slim Filling Line For Sale Technical Specification: 1-TBA 9 200ml Slim Filler Year of Manufacturing 1992 Working Hours Approx. 25000 Version: 130V PLC: TPMC 2-Tetra Pak Straw Applicator Two Unit Model: TSA 36 Year of Manufacturing: 1994 3-20m Conveyors Condition: The machine is in good condition. Dismantled and Packed in Wooden Box Ready to Ship more

New in: 2000
Price: request quote
Location: Land-PK Pakistan, 0 Gujranwala
Seller: Used Sweden Machines

1-GEA UHT Plant 6500 LPH & 12000 LPH (Two Speed) Year of Manufacturing 2000 Suitable for Milk and Juice Type: IND.UHT/120 PLC: Simens S7 2-Balance Tank 500 Liter Water Circulation; 2 Power Vessels/Expansions Four Pumps: 2 x Production + 2 x Water Circulation High/Low 3-HOMOGENISER Plant 6500 LPH & 12000 LPH (Two Speed) 4-Deaerator With Aroma System and Vacuum Pumps more

New in: 2000
Price: 45.000 €
Location: Land-ua UA
Seller: CC

Tetra Therm Aseptic Drink juice sterilizer for all type of juices includes tomato, plate type, model WAD8000, 8 tons per hour,manuf. in 2000, completed by degazer and CIP. PLC controller Alan Bredley. Excellent condition. more

New in: 2013
Price: 295.000 €
Location: Land-de DE
Seller: MVRG UG (haftungsbeschränkt) & Co. KG.

fluidized-bed dryer for seeds with upstream washing plant washing, drying, roasting Availability: as of now Item condition: like new Viewing: By appointment dismantling: by buyer technical documents: on request Description Allgaier fluid bed dryer - Machine was in operation only for testing a half year - Machine was used for poppy drying Process Description: General / dryer: The system is designed for continuous drying of max. 500 kg / h poppy, with an initial moisture content of about 40% H²O and a water evaporation capacity of max. 166kg/h. The drying is realized in one process step. The plant is not suitable for the treatment of hazardous or fire-prone materials.  ... more

New in: used
Price: request quote
Location: Land-de DE Hüttisheim
Seller: Knoll Vpa

Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump more

New in: 2011
Price: 8.000 €
Location: Land-ro RO Oradea
Seller: Kuhn & Partner Romania SRL

GRILLI IMPIANTI Water cleaning treatment unit - OSMOSIS Type of installation: self-supporting single structure with three sections (A, B, C) Type of treatment: A: Neutralizing, B: Flocculation- coagulation, C: Reverse osmosis Treatment cycle: Continuous Osmosis membrane washing: automatic Counter flow washing through activated carbon filter: automatic Operation: automatic PLC control Installation flow rate: 350 l / h for sections A and B, 200 l/h fort section C Material of the installation: PP (polypropylene) Dimensions: 1300x2700x2000 mm Electrical panel equipped with PLC control Storage tank with a capacity of 1000 liters for section C Overall dimensions: 1300x3400x2000 mm  ... more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Wide Range Gear Max 150 mm Year 2000 Ø max. gear 250 mm Ø min. gear 30 mm Electrical Characteristics Total Power 2,2Kw Dimensions and Weights Higth 1800 mm Long 1500 mm Weight 1800 kg width 1800 mm Other Features Included Accessories Norma CE, Equipo de refrigeración, PLC SIEMENS S7-300, Panel de mando SIEMENS / CE standard, Refrigeration equipment, SIEMENS S7-300 PLC, operator panel SIEMENS more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Distance between spindle axis and axis table 150 mm Exterior Ø Max. acknowledged 430 mm Max. Cutter's race 70 mm Max. stroke 50 mm Maxi. stroke 42 mm Maximum height between table and cutter 185 mm + posibilidad de elevación Module 0,5 - 3 No min / max of teeth to carve 200 Number of strokes / min Cutter 12 Range advances to tooth depth 0,9 a 90 mm/min Range of rotation advances 1,7 a 5.100 mm/min Strokes / min, min / max cutter 265 - 1250 golpes/min Ø max. external carving 150 mm Ø max. inside Aprox 285 mm Ø Spindle 85 mm Table Features Ø Hole table 100 mm Ø Table 250 mm Dimensions and Weights High 2.200 mm Long 2.900 m ... more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Ø Max. gear 320 mm Module 6 Hobbing length 210 mm Minimum number milling teeth 9 Table Features Ø Table 225 mm Electrical Characteristics Total Power 15,4 Kw Voltage 220/380 V Dimensions and Weights High 2400 mm Long 2400 mm Weight 7200 Kg Width 1800 mm Other Features Included Accessories Cargador automático por 24 piezas Norma CE, transportador de virutas magnético, Ciclo dos pases Unitronics PLC, variador de velocidad para la herramienta, accionamiento de velocidad variable para el avance /Autoloader for 24 pieces Standard CE, magnetic chip conveyor, Cycle two passes UNITRONICS PLC, speed variator for tool, Variable speed drive fo ... more

New in: 2008
Price: request quote
Location: Land-dk DK Esbjerg
Seller: Smedegaarden AS

Available is one complete Power Management, Protection system for Operating of 7 Alternators with young breakers Merlin Gerin Masterpack MW 20 H 1 and Micrologica 6.0 & Terasaki breaker Type Tem Power AT 32. SYMAP® Product Overview SYMAP® is a flexible microprocessor-based digital protection and control device for use in low, medium, and high-voltage power systems. Because of its integrated protection functions and human-machine interface capabilities, it is an efficient and cost-effective solution for all types of switchgears.With three powerful microprocessors, SYMAP® offers complete protection and control functions for generators, motors (synchronous and asynchronous), transformer ... more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Ø max. to rectifying 200 mm Dressing Velocidad 255 r.p.m. Maximum length to grinding 500 mm (en plongée) No. speed drive wheel Infinitas Speed 10/255 r.p.m. Width drive wheel 500 mm Width of the grinding wheel 500 mm. Ø mín.a grinding 3 mm Ø Muela trawl 355 mm Ø Work Wheel 650 mm Electrical Characteristics Power hydraulic motor 0.37 kW Total Power 65 kW Voltage 220/380V Dimensions and Weights High 2.100mm Long 2.300mm Weight 15.000 kg Width 2.800mm Other Features Included Accessories Portarreglas de pasante, Alimentador automático con PLC Allen Bradley, Equipo MARPOSS de medida del proceso / Automatic feeder with Allen  ... more

New in: 2013
Price: request quote
Location: Land-de DE
Seller: Ohrter Getränkemaschinen Handel

- 2-stage CO2 pressure degassing and carbonation - stainless steel pumps - consolidated design with minimum space requirements, mounted on SST rack - CIP able - SST switch cabinet mounted directly on framework - PLC Siemens S7/300 controller, Siemens touch panel in the front door of the control cabinet - electrical connection value: 230/400V, 50 Hz, control voltage 24V DC. - base frame dimensions: 2,000 x 1,800 mm. - digitized documentation included more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Ø max. to rectifying 50 mm Dimension tooth 300 x 175 x 125 mm Plongée Auto 125 mm max. Width drive wheel 220 x 125 x 125 mm Width of the grinding wheel 125 mm Ø mín.a grinding 1,5 mm Ø Work Wheel 300 mm Electrical Characteristics Total Power 7,5 Kw Dimensions and Weights High 1.260 mm Long 1.520 mm Weight 1.600 Kg. Width 1.020 mm Other Features Included Accessories Cargador para piezas plongee, Plongee hidráulico, Compensador de diamantado, PLC SIEMENS, Engrase centralizado automatico,/ Plongee charger parts, hydraulic Plongee, diamond compensator, SIEMENS PLC, automatic lubrication system, No. Manufacturing 801858 Year 1992  ... more

New in: used
Price: request quote
Location: Land-es ES
Seller: MAQUINAS TALLERES LUIS ALONSO S L

General Characteristics Advances wheelhead 1 / 30 m/minutos Height to rectify 155 mm Maximum length to grinding 2100 mm Ø Tool 200 mm Electrical Characteristics Motor power wheelhead 15 Kv Dimensions and Weights High 1900 mm Long 4750 mm Weight 3500 kg Width 1300 mm Other Features Included Accessories Engrase centralizado, Equipo de refrigeración con filtro de papel, Panel de control y PLC SIEMENS /Central Lubrication, cooling equipment with filter paper, Control Panel and PLC SIEMENS No. Manufacturing ID 3254.8 more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

No. Item Make Qty. 1 Second-hand LPG / Furnace oil fired top charging 25 ton Melting furnace Built: 2012 Zhuoshen 4 Nos. 2 Second-hand LPG / Furnace oil fired 16 ton Holding furnace Built: 2012 Zhuoshen 4 Nos. 3 Second-hand Tilting twin rolled continuous strip casting machines Built: 2012 Zhuoshen 4 sets 4 Second-hand 4 â Hi non reversing cold rolling mill with Achenbach Optiroll i2 system (AGC / AFC) Built: 2012 Zhuoshen 1 No. 5 Second-hand Inert Gas radiant tube Annealing furnaces for coils with common charging car. Built: 2012 Shengmao 4 Nos. 6 Second-hand slitter Strip width: 1750 mm Thickness: 0.2 â 2.0 mm Speed: ... more

New in: 1994
Price: request quote
Location: Land-nl NL Mijdrecht
Seller: VRT International B.V.

BITZER OSKB 7061/5361 Product number:M15-6047 Cooling capacity:44 kW Refrigerant:R22 Refrigerant Content:140 kg Voltage:400 Volt Power consumption:40 kW Motor power:18,5 / 26 kW Weight:4000 kg Year:1994 Number in stock:2 piece(s) Two complete Bitzer two-stage compressor installation, built in a weather proof containerized housing, existing out of two Bitzer compressor type OSKB7061 en OSKB5361, working on refrigerant R22. This installation is equipped with : 2x oil separator(HP and LP), liquid receiver, pressure gauges, safety switches, control panel with PLC and a fitting condenser. This is a perfect installation for a blast freezer or spiral freezer! Please visit also  ... more

New in: 1994
Price: request quote
Location: Land-nl NL Mijdrecht
Seller: VRT International B.V.

BITZER OSKB 7051(2x) / OSK 5361 Product number:M15-1105 Cooling capacity:66 kW Refrigerant:R22 Refrigerant Content:175 kg Voltage:400 Volt Motor power:18,5 (2x) / 26 kW Weight:4200 kg Year:1994 Number in stock:2 piece(s) Two complete Bitzer two-stage compressor installation, built in a weather proof containerized housing, existing out of two Bitzer compressor type OSKB7051 and one type OSK5361, working on refrigerant R22. This installation is equipped with : 2x oil separator(HP and LP), liquid receiver, pressure gauges, safety switches, control panel with PLC and a fitting condenser. This is a perfect installation for a blast freezer or spiral freezer! Please visit also o ... more

New in: used
Price: request quote
Location: Land-de DE Dortmund
Seller: VEI-Engineering GmbH

Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net more

New in: 2004
Price: request quote
Location: Land-nl NL Mijdrecht, The Netherlands
Seller: VRT International B.V.

FRIGOSCANDIA GCM 9/3-10-35-32-NN-CR Product number:M15-5006 Cooling capacity:400 kW Number of fans:3 Refrigerant:NH3/CO2/Freon Voltage:400 Volt Motor power:75 kW Year:2004 Number in stock:1 piece(s) A very nice Frigoscandia spiral freezer. Model GCM 93-10-35-32-NN-CR with a product capacity of +/- 4.000 kg/h (depending on type of product and inlet temperature). In/outfeed configuration is North/North. Infeed height= 980 mm, outfeed height= 4756 mm. Belt rotation is clock wise, belt width gross = 920 mm, belt width net = 875 mm, max product height = 80 mm, numbers of tiers = 35 tiers. This Frigoscandia spiral freezer from 2004 has only been used for 4 years and during this 4 year ... more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: