british flag
Resale Logo

PLC used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information service for engines 100-7000 KW all types  ONERGYS GmbH  http://www.onergys.de 
banner logo
start page > keywords PLC > results
794 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
2 3 4 5 6 7 8 9 <  page 10  > 11 12 13 14 15 16 17 18
121632609 401

KRONES VC 125-90 Angelus 121 L for sale
Can Filler-Seamer 63.000 cph


Can Filler-Seamer Krones VC 125-90 and Angelus 121 L, 63.000 cph This Krones VS 125-90 can filler with 125 volumetric filling valves is coupled with Angelus seamer with 12 seaming stations. The equipment is currently ...
used machine
 
Can Filler-Seamer Krones VC 125-90 and Angelus 121 L, 63.000 cph

This Krones VS 125-90 can filler with 125 volumetric filling valves is coupled with Angelus seamer with 12 seaming stations. The equipment is currently filling 12oz and 16oz cans with beer and carbonated mixed drinks. The filler has a capacity of 63.000 cph and Angelus seamer has capacity up to 96 000 cph. Both units has automatic lubrication system, they are very well maintained and in very good condition. Control system is based on Allen Bradley PLC with a touch screen and control system has been completely renewed in 2015 by Krones. The equipment becomes available in autumn 2017.

Filler type Krones VC 125-90
Number of filling valves 125
Filler capacity 63.000 can/h
Seamer type Angelus 121L
Number of seaming stations 12
Seamer capacity 15.000 – 96.000 can/h
Manufacturing year 1999
Running hours: approx 15.000 hrs
Container handling: 12oz + 16oz
Electricity: 380V/50 Hz and 460V/60 Hz
1999
Price  
  FI   request
119197799 207

BRANDT KD87/2-CF for sale
edge bander


Type: Optimat KD87/2-CFused machine edge thickness max. 8mm Workpiece thickness: 8 to 45mm Feed rate: 12m/min units - pre milling unit- quick heating - cutting knife - Double-End trimming unit - Buendigfraesstation- Fei ...
used machine
 
Type: Optimat KD87/2-CF
used machine
edge thickness max. 8mm
Workpiece thickness: 8 to 45mm
Feed rate: 12m/min
units
- pre milling unit
- quick heating
- cutting knife
- Double-End trimming unit
- Buendigfraesstation
- Feinfraesstation chamfer / radius with changing engines
- Radius scraper
- flat scraper
- swabbel
All units pneumatically adjustable by PLC
Year of construction: 1999
location: Warehouse / 82281 Herrnzell
1999
Price  
    request
121632606 402

KRONES AG Sleevematic M 2, 30.000 bph for sale
Automatic Sleeving Machine Krones Sleevematic M2


Automatic Sleeving Machine Krones Sleevematic M2, 30.000 bph, year 2008 This Krones Sleevematic is an inline machine for shrink sleeves, built in 2008. It has been running only approximately 600 hours and is excelle ...
used machine
 
Automatic Sleeving Machine Krones Sleevematic M2, 30.000 bph, year 2008

This Krones Sleevematic is an inline machine for shrink sleeves, built in 2008. It has been running only approximately 600 hours and is excellent condition. Last major maintenance has been done prior to the machines stop and regular cleanings, inspections and lubrications are still performed. It works on one way and returnable glass bottles. It is currently installed and connected – power up test can be performed. It is available immediately and due to the very low running hours and regular maintenance it is in excellent condition. The delivery includes a sleeving machine, shrink tunnel, bottle dryer and control cabinets with Siemens Simatic PLC

Make: Krones
Type: Sleevematic M 2
Manufacturing year 2008
Capacity: up to 30.000 bph
Bottle size used: 355 ml glass
Running hours: 600 hrs approx.
Shrink tunnel 9 sections
Type/Serial: K-795-144
Electricity: 400 V/ 50 Hz or 460 V / 60 Hz
2008
Price  
  FI   request
119197637 207

OTT Karibic for sale
edge bander


Type: Karibicused machine edge thickness max. 8mm Workpiece thickness: 8 to 42mm Feed rate: 12m/min units - quick heating - cutting knife - Double-End trimming unit - shaping unit- Radius scraperAll units pneumatically a ...
used machine
 
Type: Karibic
used machine
edge thickness max. 8mm
Workpiece thickness: 8 to 42mm
Feed rate: 12m/min
units
- quick heating
- cutting knife
- Double-End trimming unit
- shaping unit
- Radius scraper
All units pneumatically adjustable by PLC
Working hours: 198
Year of construction: 1994
location: Warehouse / 82281 Herrnzell
1994
Price  
    request
121632570 1200

LIMBURG - LATHAM 3.600 kg dry product / 24 h for sale
Dewatering Station with Membrane Filter Press


Dewatering Station with Membrane Filter Press for Kieselguhr Sludge This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is ...
used machine
 
Dewatering Station with Membrane Filter Press for Kieselguhr Sludge

This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is suitable also for dewatering other type of sludges. Actual dewatering is made with Latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content Filter press is equipped with an automatic cloth washing system and an automatic cake discharge. Shaker bars for discharge and plate opening and closing functions are hydraulically operated (Limburg Cake Release Control System). Cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. Process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with Siemens Simatic S 7-400 PLC and Siemens OP 7 display. Equipment was delivered in year 2000 and it is still installed and in good operational condition.

Technical data:
Made by Limburg – Latham
Made in year 2000
Inlet sludge dry content 10 – 20%
Capacity max 3600 kg dry product / 24 hours
Cake dry content > 50% by weight
Filtrate dry solid content < 2 % by weight
Latham filter press Side bar membrane 630
Total filter area 6.9 m2
Total chamber volume 99.8 dm3
Plate size 630 mm
Working pressure 7 barg
Number of chambers 12 (expandable to 15)
Plate transport Automatic, multiple cake discharge
Membrane filtration pump 159 litres / min
Sludge tank 6 m3, AISI 316L
Sludge tank agitator 0.75 kW, 80 rpm, blade 660 mm
Sludge pump capacity 511 litres / min
Filtrate tank 1.5 m3, AISI 316L
2000
Price  
  FI   request
118617762 502

BTS-MF550hd for sale
Waste baler, Cardboard baler, Film baler


Baler BTS-MF550hd Height: 3500mmWidth: 2115mmDepth: 1200mmWeight: 1935kgTransportation Ht: 2500mmPower Supply: 380-400V (three phase)Motor: 11kW 32 AmpPressing Force: up to 50 TonNoise Level: 75 decibelsTyre BaleHeight:  ...
used machine
 
Baler BTS-MF550hd

Height: 3500mm
Width: 2115mm
Depth: 1200mm
Weight: 1935kg
Transportation Ht: 2500mm
Power Supply: 380-400V (three phase)
Motor: 11kW 32 Amp
Pressing Force: up to 50 Ton
Noise Level: 75 decibels

Tyre Bale
Height: 1200mm
Width: 1500mm
Depth: 769mm
Weight: up to 650kg (depends on material)
Cycle Times: 50 seconds

Loading Aperture
Height: 880mm
Width: 1500mm
Depth: 769mm

Features
o Extended cylinders produce a more compact bale
o Can bale a variety of waste products including tyres, PET-bottles, textiles, computer screens and other heavy duty materials
o Fully automated bale ejector, simplifies removal of bale
o Retaining Claw system to reduce spring back
o CE-certified
o Made in Europe
o PLC controls (automatic bale cycle); ready for operation
2017
Price  
    request
121632569 706

SASIB BEVERAGES S.P.A. PAMA 6512 DR for sale
Tunnel Pasteurizer Double Deck 90.000 bph


Tunnel Pasteurizer Double Deck SASIB PAMA 6512 DR, 90.000 bph This is two deck design tunnel pasteurizer was made by SASIB (now Sidel) in 1998 and it was refurbished in 2012. This pasteurizer features the Walking Bea ...
used machine
 
Tunnel Pasteurizer Double Deck SASIB PAMA 6512 DR, 90.000 bph

This is two deck design tunnel pasteurizer was made by SASIB (now Sidel) in 1998 and it was refurbished in 2012. This pasteurizer features the Walking Beam conveyor system, which is very reliable when handling fragile bottles and when working in high temperatures. The pasteurizer has total of 7 zones and it is two deck design. In- and out-feed conveyors are included in the delivery.

Technical information
Manufacturer SASIB Beverage S.p.A.
Type PAMA 6512 DR
Manufacturing year 1998
Number of zones 7
Capacity 0.20 liters 2 x 47 000 bph
Capacity 0.66 liters 2 x 45 000 bph
Control PLC Siemens Simatic S7 with touch screen
Serial nr. PAF 194
1998
Price  
  FI   request
118617765 502

BTS-Fasspresse / Kunststofffaesser for sale
Drum Crusher, Drum Press


BTS-Drum Press for Metal drums / Plastic drumsYear of manufacture: 11/2016Height: 2587mmWidth: 1190mmDepth: 1000mmWeight: 690kgTransportation Ht: 1800mmPower Supply: 380-400V (three phase)Motor: 11 kW 32 AmpPressing Forc ...
used machine
 
BTS-Drum Press for Metal drums / Plastic drums

Year of manufacture: 11/2016
Height: 2587mm
Width: 1190mm
Depth: 1000mm
Weight: 690kg
Transportation Ht: 1800mm
Power Supply: 380-400V (three phase)
Motor: 11 kW 32 Amp
Pressing Force: up to 24 Ton
Noise Level: 75 decibels
Compaction Ratio: 6:1
Cycle Times: 40 seconds

Loading Aperture
Height: 1210mm
Width: 802mm
Depth: 816mm

The BTS-Drum Crusher is suitable for crushing metal and plastic drums up to 200Lt. in size. Drum Crusher resolves the problem of space and efficiency, Volume reduction is up to 90% helping users to savings in both, space and efficient handling of 30-200Lt. drums.

Features
o High compaction force ratio
o Totally enclosed chamber ensures high level of safety
o 30Lt. oil collection tray with tap connection
o CE-certified
o Made in Europe

Optional Extra
o Multi-head to compact smaller container inside a 200Lt. steel drum
o PLC control with automatic bale cycle; ready for operation
2017
Price  
    request
121632568 403

KRONES AG Multimodule II, Pressure Sens. for sale
Labeling Machine Fully Automatic 46.000 bph


Labeler KRONES Multimodule II PSL, 46.000 bph This labeling machine was manufactured in year 2010 by Krones and it has been operated very limited hours till year 2014. It has six plug-in type APS (Autarkic Pressure S ...
used machine
 
Labeler KRONES Multimodule II PSL, 46.000 bph

This labeling machine was manufactured in year 2010 by Krones and it has been operated very limited hours till year 2014. It has six plug-in type APS (Autarkic Pressure Sensitive) 4-Spender labeling stations for pressure sensitive self-adhesive film labels and tree plug-in type gold clue paper labeling stations. The capacity of this Multimodule labeler is 46 000 bph in 0.33 and 0.50 liter glass bottles. Paper labels to be placed on front-back-neck of a bottle. Each container plate on the container table is powered by a computer controlled actuator. The bottle rotations required for rolling on the labels are conducted according to a set program. When changing over to a new type label, no mechanical cam must be changed. Multimodule is operated from a touch screen which contains also a comprehensive diagnostic functions and detailed malfunctioning warnings. Currently machine is dismantled and in a warm warehouse.

Technical data

Manufacturer Krones AG
Type Multimodule II 2400-60-125.6
Manufacturing year 2010
Krones serial nr K 408-179
Capacity 46 000 bph
Number of stations 60
Carousel diameter 2400 mm
Pitch 125.6 mm
Stations 6 stations for plastic for self-adhesive PS labels
3 stations for paper labels, gold clue
Control PLC Siemens S7-300
2010
Price  
  FI   request
109402880 203

WINTER for sale
Vierseitenhobel- und Kehlautomat TIMBERM


- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. We ...
new machine
 
- Hobelbreite 50 - 400 mm
- Hobelhöhe 10 - 300 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
- Drehzahl 6000 U/min
- 6 Spindeln
- untere Welle min. / max. Werkzeug FI 160 /180 mm
- rechte Welle min. / max. Werkzeug FI 160 /230 mm
- linke Welle min. / max. Werkzeug FI 160 /230 mm
- obere Welle min. / max. Werkzeug FI 160 /230 mm
- 2. obere Welle min. / max. Werkzeug FI 160 /230 mm
- untere Welle min. / max. Werkzeug FI 160 /230 mm
-max. Sägeblattdurchmesser 2. obere Welle 300 mm
Motorleistung:
1. unten 15,0 kW
2. rechte 11,0 kW
3. linke 11,0 kW
4. oben 15,0 kW
5. oben 15,0 kW
6. unten 15,0 kW
- Motor Vorschub 11,0 kW
- Motor Höhenverstellung 1,5 kW
- Gesamtanschluss 94,5 kW
- Jointer obere Wellen und unter Welle
- horizontale Wellen mit Gegenlager / Hydrospannung
- obere Welle elektrisch verstellbar mit Vorschubsystem
mit Digitaler Anzeige
- linke Welle elektrisch verstellbar mit Digitaler Anzeige
- Bedienpult mit PLC touch screen
- Satz Vorschubwalzen FI 180 x 40 x 110 mm
- 5 Stück angetriebene Walzen im Tisch
- Aufgabetischlänge 2000 mm, gehärtete Ausführung HRC60
- Druckluftanschluss 8 bar
- Absaugstutzen 6 x 180 mm
- Spannung 400 V / 50 Hz
- Abmessungen L=5620, B=2200, H=2000 mm
- Gewicht 12.000 kg
Outstanding character
1, Special processing range, widely satisfy the needs of greatness workpieces. The Max. working widthis 400mm,and the Max. thickness is 250mm
2, Each spindle with the diameter of 50mm . The out bearing on the horizontal spindles can increase the carrying capacity . The Max. outer diameter of cutting circle reaches 230mm, this is good to improve the machining quality.
3, The feeding system is built up with 6 groups of bottom rollers and 12 groups of top feeding rollers which OD is 180mm, They are driven by pneumatic to ensure powerful feeding. Besides, the 1st bottom roller and infeed table can move up and down at the same time to simplify to adjustment
4, The feeding table is embeded with wearable alloy for the durability
5, The working table adopts special alloy steel and also treated by vulcanize treatment . The hardness more than HRC60 degrees for the durability.
6, The left and right spindles are designed to adopt double-desk working [...] axial adjustment range is 80mm. As it can hold two groups of cutter blocks, it is flexible for machining.
7, The working thickness of top spindle and the working width of left spindle are adopt electric setting. Higher precision and easier to operate.
8,Each feeding roller , side pressure wheels, front and rear preasure board of top spindle are pressed by pneumatic. The pressure can be adjusted and it is convenient to control.
9, Motion adjustment is widely adopted pneumatic-locking each spindle and the inter-lock with the electric system is for safety and simplify operations
10, For the 2nd bottom spindle, There is individual motor automaticly to lift the top pressure shoe, and the saw blade installed reaches the diameter of 300mm .The top pressure shoe which is controlled by pneumatic enlarged the working range as well.
11, To assure powerful cutting, the spindles are with high-power motor and driven by synchronous belt.
12, Inverter feed speed of 5-25m/min.
13, Electric oil pump lubricates the working table in timing and ration (which can be adjusted) , centralized lubrication to moving parts by manual oil pump.
14, Adopting PLC system to achieve the control of each spindle motor and location setting device.
15, Moveable PLC screen , convenient for using
16, Adopting electric components from international class with steady quality
17, Pneumatic blower to ease the cleanness
18, Sealed safety cover is for the protection against noise and dust, and it is helpful for safe operation
new
85,000 €  
    request
121615017 209

SICKO Typ CTM 95 K for sale
Stacking Automatic


Stack machine with 2 built lengths cross-cut saws Stacking automatic with 2 crosscut saws constructed on top Pater Noster stacking machine Pater Noster system Built in 2000 year of make 2000 Side stand 2 piece ...
used machine
 
Stack machine with 2 built lengths cross-cut saws
Stacking automatic with 2 crosscut saws constructed on top

Pater Noster stacking machine
Pater Noster system

Built in 2000
year of make 2000
Side stand 2 pieces
stacking walls 2 pieces
Mechanically movable sides stand
stacking walls movable

Staple length 500-6 000 mm
Stack width max. 1 200 mm
Stack height max. 1 200 mm
Performance 20 cycles/min.

stacking length 500-6 000 mm
stacking width of 1 200 mm
stacking height of 1 200 mm
capacity 20 pieces/min.

LIFTING and LOWERING unit attached to the side stand
Drive electric motor-driven, layers down driving
Lifting and Sekaggregat 2 PCs
Bar magazine on the lifting and lowering unit
Strip magazine 2 piece

Lifting table constructed at the side of the stacker walls
lifting table 2 pieces
driven with electro engine
Strip magazines 2 pieces

LENGTH cross-cut saws mounted above on the side stand
Saw Motors 2 x 4 kW

Cross-cut Akshay constructed on top of the stacker walls
electro motor 2 x 4 kW

FEEDER ROLLER
6 500 mm long
Roll width 250 mm
Feed adjustable max. 50 m / min.

ROLLER CONVEYOR
length 6 500 mm
roller width 250 mm
feed speed stepless max. 50 m / min.

Motor driven transport roller conveyor
Length x width 7 700 x 1 200 mm

ROLLER CONVEYOR for the stacket packages
driven by electric motor
length x width 7 700 x 1 200 mm control cabinet, control
like new condition, used little
control panel PLC
Stacker plans like new
2000
24,500 €  
    request
109403674 202

WINTER for sale
Doppelendprofiler Industry series 6025H


Technische Daten: - 6 Aggregate- Arbeitsbreite min./max. 300 - 2500 mm- Arbeitshöhe min./max. 10 - 120 mm- Vorschub stufenlos regelbar 6 - 36 m/min- Motor Vorschub 4,0 kW- Motor Breitenverstellung 0,75 kW- Gesamtanschlu ...
new machine
 
Technische Daten:

- 6 Aggregate
- Arbeitsbreite min./max. 300 - 2500 mm
- Arbeitshöhe min./max. 10 - 120 mm
- Vorschub stufenlos regelbar 6 - 36 m/min
- Motor Vorschub 4,0 kW
- Motor Breitenverstellung 0,75 kW
- Gesamtanschluss 41,0 kW
- Spannung 400 V / 50 Hz
- Absaugstutzen FI 6 x 120 mm
- PLC + touch screen Steuerung
- Transportkette mit Nocken, Abstand 500 mm
- Einlauflänge 1500 mm für Paneele / Dielung / Möbelplatten / Türen

Vorritzsäge:
- Motor 3,0 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 30 mm
- Sägeblatt FI min./max. 160 - 200 mm

Ablängsäge:(Zerspaner)
- Motor 7,5 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 30 mm
- Sägeblatt FI min./max. 200 - 300 mm

Frässpindel:
- Motor 7,5 kW
- Drehzahl 7500 Upm.
- Frässpindelaufnahme FI 40 mm
- Werkzeug FI min./max. 108 - 180 mm
- schwenkbar +60C bis -30C

- Abmessungen L=4850, B=4380, H=1820 mm
- Gewicht 5800 kg
new
41,000 €  
    request
121596517 1800

WATERS Micromass Quattro-Micro for sale


MS-MS Massenspektometer, Waters Micromass Quattro micro MS-MS Massenspektometer, used Maintenance book,. Control computer/software BOC Edwards pump, very well maintained, regularly serviced. 1 year warranty and 1 x ...
used machine
 
MS-MS Massenspektometer,
Waters Micromass Quattro micro MS-MS Massenspektometer, used
Maintenance book,.
Control computer/software
BOC Edwards pump,
very well maintained, regularly serviced.
1 year warranty and 1 x free maintenance.
A HPLC Waters Alliance HT 2790 with 2996 PDA detector,.
Maintenance book,
very well maintained, regularly serviced, 1 year warranty and 1 x free maintenance
Optional nitrogen generator, like new: 6500,-EUR
Purchase price of the system with installation and training on-site: 38,000,-EUR

The system is still in operation and can be visited at any time and tested.
 
38,000 €  
    request
109403676 202

WINTER for sale
Doppelendprofiler Industry series 8025H


Technische Daten: - 8 Aggregate- Arbeitsbreite min./max. 300 - 2500 mm- Arbeitshöhe min./max. 10 - 120 mm- Vorschub stufenlos regelbar 6 - 36 m/min- Motor Vorschub 4,0 kW- Motor Breitenverstellung 0,75 kW- Gesamtanschlu ...
new machine
 
Technische Daten:

- 8 Aggregate
- Arbeitsbreite min./max. 300 - 2500 mm
- Arbeitshöhe min./max. 10 - 120 mm
- Vorschub stufenlos regelbar 6 - 36 m/min
- Motor Vorschub 4,0 kW
- Motor Breitenverstellung 0,75 kW
- Gesamtanschluss 47,0 kW
- Spannung 400 V / 50 Hz
- Absaugstutzen FI 8 x 120 mm
- PLC + touch screen Steuerung
- Transportkette mit Nocken, Abstand 500 mm
- Einlauflänge 1500 mm für Paneele / Dielung / Möbelplatten / Türen

Vorritzsäge:
- Motor 2,2 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 30 mm
- Sägeblatt FI min./max. 160 - 200 mm

Ablängsäge:(Zerspaner)
- Motor 5,5 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 30 mm
- Sägeblatt FI min./max. 200 - 300 mm

1. Frässpindel:
- Motor 5,5 kW
- Drehzahl 7500 Upm.
- Frässpindelaufnahme FI 40 mm
- Werkzeug FI min./max. 108 - 180 mm
- jumping (pneumatisch gesteuertes Ein- und Austauchen)

2. Frässpindel:
- Motor 7,5 kW
- Drehzahl 7500 Upm.
- Frässpindelaufnahme FI 40 mm
- Werkzeug FI min./max. 108 - 180 mm
- schwenkbar +60C bis -30C

- Abmessungen L=4850, B=4650, H=1820 mm
- Gewicht 6500 kg
new
48,500 €  
    request
121596463 107

DURMA AD-S 30220 - PLC 2060 for sale


AD-S 30220 PRESS BRAKE 3 MT 220 TONS MOTORISED CROWNING - 4 AXES - CYBELEC MODEVA 15 T PL-C 2060 130 AMP. PLASMA CUTTING 2 MT 6 MT TABLE THE COMPANY CLOSED ITS BRANCH AND THE MACHINES MUST BE SOLD TOGETHER ...
used machine
 
AD-S 30220 PRESS BRAKE

3 MT 220 TONS

MOTORISED CROWNING - 4 AXES - CYBELEC MODEVA 15 T

PL-C 2060 130 AMP. PLASMA CUTTING

2 MT 6 MT TABLE

THE COMPANY CLOSED ITS BRANCH AND THE MACHINES MUST BE SOLD TOGETHER
2017
92,000 €  
  TR   request
109401900 209

WINTER for sale
Furnierschere Typ MDQ 260 A


Technische Daten: - hydraulisch - max. Schnittlänge 2600 mm - max. Schnitthöhe 50 mm - Motor 4,0 kW / 400 V - Motor Vorschub 0,18 kW - max. Arbeitsdruck 10 Mpa - Lichtschranke - 2-Handbedienung - Siemens PLC - Steuerun ...
new machine
 
Technische Daten:
- hydraulisch
- max. Schnittlänge 2600 mm
- max. Schnitthöhe 50 mm
- Motor 4,0 kW / 400 V
- Motor Vorschub 0,18 kW
- max. Arbeitsdruck 10 Mpa
- Lichtschranke
- 2-Handbedienung
- Siemens PLC - Steuerung
- elektrische Anschlagverstellung
- CE Ausführung
- Abmessungen L=3680, B=1680, H=1600 mm
- Gewicht 2350 kg
new
12,500 €  
    request
121595152 204

HEESEMANN LSM 6 for sale
Belt grinders


TECHNICAL SPECIFICATIONS; PLC control electronic Heesemann Model/type of LSM 6 Year of manufacture: 1993 Machine available in stock The state machine. grinding width 1350 mm thickness max. ground element 150 mm  ...

 
TECHNICAL SPECIFICATIONS;

PLC control electronic Heesemann
Model/type of LSM 6
Year of manufacture: 1993
Machine available in stock
The state machine.
grinding width 1350 mm
thickness max. ground element 150 mm

CONFIGURATION OF THE MACHINE;

And-the transverse unit cross-Sergeant with pressure electronic sequential
-main motor 13 KW
-oscillation of pneumatic photocells
-access to the dust Extractor 1 x 180 mm
-abrasive belt size 5480 x 150 mm

II-power combo of shoes
-main motor 13 KW
-abrasive belt cleaning system with oscillation
-ankle doiciskiem pneumatic
-oscillation of pneumatic photocells
-exit exhaust fi 1 x 180 mm
-abrasive belt size 2620 x 1350 mm

OSCILLATION OF PNEUMATIC PHOTOCELLS

-air strips system with oscillation cleaning tape

III-power combo of shoes
-main motor 13 KW
-belt cleaning system szlifujacego
-ankle doiciskiem pneumatic
-exit at oadi?g. 1 x x 180 mm
-abrasive belt size 2620 x 1350 mm

IV-power brush element for the main unit on the output
-engine 1.1 kw
-access to a dust Extractor. 1 x 140 mm
-adjustable feed gear box motor 4kw
-feeding speed 6 – 26 m/min
-air consumption about pr. 28 m/s, 4340m3/h
-compressed air consumption approx. 800 l/min

FEEDING TRAY-TRANSPONDER WITH VACUUM VACUUM

-tape partner 5 sectional
-Air podawczej tape cleaning system
-automatic height adjustment of the grinding of the electronic display
-engine 0, 55kw
-the machine is suitable for grinding and cuts mi?dzylakierowych

Dimensions:
-length: 3750 mm
-width: 3230 mm
-height of 2300 mm
Machine weight around 8000kg
 
Price  
  PL   request
109402945 202

WINTER for sale
Doppelendprofiler Typ RMD 6025A


- 6 Aggregate- Arbeitsbreite min./max. 250 - 2500 mm- Arbeitshöhe min./max. 5 - 85 mm- Vorschub stufenlos regelbar 4 - 17 m/min- Motor Vorschub 3,0 kW- Motor Breitenverstellung 1,1 kW- Gesamtanschluss 30,5 kW- Absaugstu ...
new machine
 
- 6 Aggregate
- Arbeitsbreite min./max. 250 - 2500 mm
- Arbeitshöhe min./max. 5 - 85 mm
- Vorschub stufenlos regelbar 4 - 17 m/min
- Motor Vorschub 3,0 kW
- Motor Breitenverstellung 1,1 kW
- Gesamtanschluss 30,5 kW
- Absaugstutzen FI 6 x 110 mm
- Text Display / PLC für elektr. Breitenverstellung
- Transportkette mit Nocken, Einlauflänge 543 mm für floor / Diehlung Vorritzsäge:
- Motor 3,0 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 25,4 mm
- Sägeblatt FI min./max. 125 - 200 mm Ablängsäge:(Zerspaner)
- Motor 4,0 kW
- Drehzahl 3000 Upm.
- Sägeblattaufnahme FI 30 mm
- Sägeblatt FI min./max. 250 - 300 mm Frässpindel:
- Motor 5,5 kW
- Drehzahl 7500 Upm.
- Frässpindelaufnahme FI 40 mm
- Werkzeug FI min./max. 140 - 160 mm - Abmessungen L=4735, B=3100, H=1660 mm
- Gewicht 4100 kg
new
42,000 €  
    request
121594982 203

WEINIG HYDROMAT 1000 for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -year of manufacture 2007 TECHNICAL PARAMETERS: -working width 230 mm -working height 160 mm -spindle diameter 50 mm -system Memory -total power 82 kW -adju ...

 
-machine in stock
-After reviewing the technical
-year of manufacture 2007

TECHNICAL PARAMETERS:

-working width 230 mm
-working height 160 mm
-spindle diameter 50 mm
-system Memory
-total power 82 kW

-adjustment of the feed on the inverter
return to 36 m/min
-feed motor 7.5 kW

arrangement of spindles:
DOWN + RIGHT + LEFT + UP + UP + DOWN

1) lower spindle 11 kW
2) spindle right 11 kW
3) spindle left 11 kW
4) upper spindle 11 kW
5) upper spindle 11 kW
6) lower spindle 11 kW

-the last two spindles on podtrzymce + jointer
-pneumatic input
– high low
-nozzle diameter 140 mm

-three rows of steel rollers upper
-four rows of rollers rubber upper
-two rolls of the countertop stretching

-Displays the PLC control trzewików
-display of the PLC spindle adjustment
-electronically regulated left head
-electronically adjustable height
 
Price  
  PL   request
109402182 202

WINTER for sale
End Matcher Profiler - 250


-high speed Nut- und Feder-Profiliermaschine -Arbeitsbreite 40 - 250 mm -Werkstückdicke 10 - 35 mm -min. Werkstücklänge 270 mm -max. Werkstücklänge unbegrenzt -max. Vorschubgeschwindigkeit 90 m/min. -Vorschubgeschwi ...
new machine
 
-high speed Nut- und Feder-Profiliermaschine
-Arbeitsbreite 40 - 250 mm
-Werkstückdicke 10 - 35 mm
-min. Werkstücklänge 270 mm
-max. Werkstücklänge unbegrenzt
-max. Vorschubgeschwindigkeit 90 m/min.
-Vorschubgeschwindigkeit über Frequenzumformer stufenlos regelbar
-Schnittgeschwindigkeit 24 m/min.
-Motor Fräse 2 x 7,5 kW
-Drehzahl Fräse 7500 U/min
-Motor Vorschub 0,75 kW
-Steuerspannung 24 V
-Spannung 400 V / 50 Hz
-Gesamtanschluss 16,1 kW
-pneumatische Spanner von oben und seitlich
-Spindel FI 40 mm
-inkl. Wendeplatten Werkzeuge
-Steuerung manuell / automatisch
-PLC Steuerung mit Touch-Screen für einfache Bedienung
-Druckluftanschluss 8 bar
-inkl. 3,5 m motorisch angetriebene Einlaufrollenbahn
-inkl. 2,2 m Auslaufrollenbahn
-Abmessungen L=1500, B=1220, H=1300 mm
-Gewicht 1050 kg
new
32,000 €  
    request
<  page 10  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter