We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
used
The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...
used
3 pieces used heavy placement arms for table scissors, etc. Length 490 mm Width 98 mm Weight / piece 16 kg
used
Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.
used
CTO 400 Piesok press brake from 1981 for sale. (pressure 400t) The piston rod is damaged and has a micro-crack. We have dies and punches in various sizes for it - prices to be agreed. The total weight of the press is approximately 39t.
used
Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.
used
The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.
used
Working width: 2000mm, weight: 1.65t.
used
Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3 Hydraulic drop end Digital read out position side rolls Pendent control position side rolls Rolling width: 3000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 16mm Top Roll Ø: 420mm Side roll Ø: 405mm Number of rolls: 3 Rolling speed: 6,5 Length: 5800mm Width: &nbs ...
used
Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine in working condition
used
Inv. Num. : 6768 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg
used
STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE ...
used
Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg
used
Machine parameters: Max. cutting length: 3150 mm Max. sheet thickness: 6 mm Machine weight: 6800 kg The machine is in perfect condition after GO, the following was done: grinding of blunt knives, resealing of working cylinders and their flanges, resealing of holders and sections, replacement of polyurethanes, replenishment of nitrogen, electrical repair. (Current invoice proving the scope of work of course)
used
Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min
used
Machine weight: 10000 kg Total machine input:: 11 kW Max. metal sheet thickness: 8/12 mm Min. inner diameter of the circular oven: 330 mm Upper cylinder diameter: 300 mm Bottom cylinder diameter: 300 mm Circle speed: 8000 mm/min
used
Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg
used
Key data: 80 mm
Inv. Num. : 6470 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg
used
sheet width: 3150 mm plate thickness: 6,30 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 8,90 t dimensions of the machine ca.: m Dimensions: approx. L 4.00 x W 1.65 (plus support arms) x H 1.75 m • Motorized back gauge 15 – 600 mm • Angle stop • Support arms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility
used
Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used
used
guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used
used
Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg