used PICANOL Airjet and waterjet weaving machines

24 PICANOL PCB boards from PICANOL looms composed of: 3 x PICANOL AISQ-B/2C-1 ref. BE151623, 1 x PICANOL AISQ-B/4C-1 ref. BE151624, 4 x PICANOL GDLP-2 ref. BE152373, 1 x PICANOL J-1 ref. BE152379, 2 x PICANOL DTS-1 ref. BE153319, 4 x PICANOL AIS-C/HP/4C-4 ref. BE153947, 2 x PICANOL AISE/HPT280/TI/6C-4 ref. BE153951, 3 x PICANOL CPUE-3 ref. BE154114, 3 x PICANOL AUT-S/EP2C-3 ref. BE154180, 1 x PICANOL SUP-3 PH600S ref. BE205734

37 Tsudakoma Zax looms for sale in running condition 12 Tsudakoma Zax Looms 280cm - 110" Year 2002 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 13 Tsudakoma Zax Looms 330cm - 130" Year 1998 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 12 Tsudakoma Zax Looms 340cm - 1430 Year 2001 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop  ...

GAUGE 15 - 8 BAR PERFECT RUNNING CONDICTION

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

WW 800MM MUDATA COMPUTER C 200 4 CREEL FOR BOBIN 2 CREEL FOR BEAMS

FOR PRODUCE ELASTIC WEBBIN DOUBLE LOOMS

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

Metex looms for weaving cuted velvets These looms are still in production and are in very good condition. Two jacquard machines were completely renovated in year 2019. Specification of the looms: 1 loom – 1998 1 loom – 1999 1 loom – 2003 Technical parameters: Width: 1420 mm (finished width 1400 mm) Reeddensity: 1280 reedents Jacquard type: Giropan 2 x 1320 hooks Harness (number of cords): 7720 harness bands – 2 colours 2560 harness bands for pile 5120 harness bands for the ground Beam stand: 2 beams of 800 mm Take up roller: included Creel: for 2 x 1280 bobbins, weights included cutting wires of 2 x 1,3 x 1750 mm We can offer for these 3 looms also cards preparing machines -production ca ...

32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

wire diameter range: 2,0 - 6,0 mm mesh width: 15 - 80 mm working width: max. 2.000 mm; ready for operation

crimped mesh assembly loom, autom. weft wire fee wire diameter - automatic 1,0-6,0 mm mesh width - automatic 10-60 mm working width 2.000 mm wefts per min. 30

Working width: 4000mm, with 3 warp beams, 6 sectional warp beams, 20 shafts 13 inch, dobby machine 2881/2 and batch winder Neuenhauser, operational hours counter: 10,613h.

This Soitaab Waterjet IP-20 Waterjet cutting machine was made in 2017 in Italy.

This Flow MACH4 4060 XD Waterjet Cutting machine was manufactured in the year 2014. It is equipped with a Flow control unit and has 5 axis. The machine has a working pressure of 6000 bar.

This STM PremiumCut 3D 68 Waterjet cutting machine was manufactured in the year 2019. The machine has a Max. operating pressure of 4000 bar.

This Flow Mach3 4020B Waterjet cutting machine was manufactured in the year 2013 in the United States. It is equipped with a Flow control unit. The machine has a cutting area of 4000 x 2000 mm.

This Waterjet Suprem Waterjet cutting machine was manufactured in the year 2017 in Italy and has 662 production hours. It is equipped with a Waterjet control unit.

This Kenner KWJ 3020 C KMT Streamline SL-V 30 Waterjet cutting machine was manufactured in the year 2012 in Germany. It is equipped with a Kenner control unit.

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

This Bystronic ByJet Pro 3015 Waterjet cutting machine was manufactured in the year 2008 in Switzerland.

This Bystronic Byjet Flex 6030 Waterjet cutting machine was manufactured in the year 2016 in Switzerland and has 5827 production hours.