used PFAUTER Milling tools

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P1251

Description: Technical details: inner cone of the Sk40 milling spindle, speed range 300 to 3000 rpm, drive motor 15 kW, max. milling cutter 120 x 170 mm, milling head was overhauled by Pfauter 3 years ago Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 500 mm, weight approx.: 800 kg

For sale a milling head at the company Pfauter ca.2012 completely overhauled.

For sale a milling head without counter bearing

Div. Interchangeable wheels for the gearbox Speed...

Various interchangeable wheels for the gearbox Speed...

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

One servo motor for each X/Z/A/ and C-Axis

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1800 mm gear width: 735 mm max. module: 12 min. module: 1 total power requirement: 30 kW weight of the machine ca.: 23 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Max. disk diameter: 275mm, connected load: 100kVA, weight: 10t, was maintained regularly, with cooling system, an on-site inspection is possible.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 90 mm gear width: 50 mm max. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kW weight of the machine ca.: 7,9 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

max. wheel diameter: 330 mm gear width: - mm max. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVA weight of the machine ca.: 11,7 t dimensions of the machine ca.: m We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle o ...