used PFAUTER Gear Hobbing Machines

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Talladora de fresa madre PFAUTER PA 210, Ø max. gear: 430 mm, Module: 8, Hobbing length: 275 mm, Brand cnc: SIEMENS, Cone milling spindle: MORSE 5, Hob spindle speeds: Max 550 r.p.m., Maximum inclination: +/- 40º, Maximum length tool: 228 mm, Maximum ø of tool: 163 mm, Minimum number milling teeth: 4, Number of axles cnc: 4 (Z, X, B and C), Tangential tour: 170 mm, Ø hole table: 90 mm, Ø table: 240 mm, Axial power motor (z): 13 Nm, Radial power motor (x): 13 Nm., Motor power table (c): 20 Nm., Power tool motor (b): 12 Kw, Total power: 36Kw, Voltage: 220/380 V, High: 3.085 mm, Long: 5.970 mm, Weight: 3.085 mm, Width: 2.940 mm

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

max. wheel diameter: 1800 mm gear width: 735 mm max. module: 12 min. module: 1 total power requirement: 30 kW weight of the machine ca.: 23 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 190 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 024 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed

max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm

max. wheel diameter:180 mm gear width:* mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

For sale a milling head without counter bearing

Div. Interchangeable wheels for the gearbox Speed...

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Gleason-PFAUTER CNC Hobbing Machine for Gear Cutting of cylindrical and worm gears up to 2.4 m in diameter. Designed for internal milling Control system SIEMENS Sinumeric 840 D Working area Workpiece nominal diameter: 2000 mm Largest millable diameter: 2400 mm Distance between milling cutter and workpiece axis min./max.: 300 / 1400 mm Axial slide path max.: 1600 mm Radial slide path: 1050 mm Hob cutter length max.: 375 mm Hob cutter diameter max.: 350 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter displacement: 300 mm Nominal module hobbing approx.: 20 mm Nominal module tooth form milling approx.: 30 mm Internal milling head IFK2 , Workpiece table Table diameter: 1870 mm Table bore: 600 mm Chip removal through table bore Please take a l ...

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

P1251

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

amount: 36 STK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the t echnical data and layout plans in the PDF file . max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS S ...