british flag
Resale Logo

Orma used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords Orma > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125484144 1501

LINDE E20P-02 for sale
Electric forklift trucks


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2006
2,700 €  
  DE   request
125475228 1900

HERAEUS HC 4020 for sale
Climate Test Chamber


Weight approx.: 400 kgDimensions (l x w x h) approx.: 1500 x 850 x 1750 mmDescription: Ambient climate chamber with deep dehumidification and high temperature performance test, temperature range -40°C to 180°C +/- 0.3 ...
used machine
 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 1500 x 850 x 1750 mm
Description: Ambient climate chamber with deep dehumidification and high temperature performance test, temperature range -40°C to 180°C +/- 0.3°C, test chamber dimensions 575 x 550 x 645 mm, stainless steel case, on a mobile base, documentation and separate wired control element, for further details see photos
1992
used machinery auction RESALE 500 €  
  CH   request
125484142 209

BRANDT O KDF 660C for sale
Edge banding machines


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2005
12,000 €  
  DE   request
125475308 102

COLCHESTER Tornado 80 for sale
CNC Lathe


Weight approx.: 2300 kgturning length: 350 mmDimensions (l x w x h) approx.: 1600 x 1300 x 1800 mmspindle bore: 54 mmtool taper: VDI 3425/30 Description: COLCHESTER Tornado 80 CNC Lathe - swing diameter over bed covers:  ...
used machine
 
Weight approx.: 2300 kg
turning length: 350 mm
Dimensions (l x w x h) approx.: 1600 x 1300 x 1800 mm
spindle bore: 54 mm
tool taper: VDI 3425/30
Description: COLCHESTER Tornado 80 CNC Lathe
- swing diameter over bed covers: 420 mm
- swing diameter over carriage cover: 280 mm
- max. turned diameter: 170 mm
- x-axis travel: 165 mm
- carriage inclination: 60°
- spindle centre height (from floor): 875mm
- spindle nose: A2-5
- drawtube (bar) capacity: 42 mm
- spindle front bearing (internal diameter): 80 mm
- max. spindle speed (as standard/optional): 4000/6000 rpm
- spindle motor (continuous 30 min. rating): 7,5/11 kW
- min. spindle speed for full motor power: 750/1000 rpm
- X and Z axis rapid traverse rate: 10 and 15 m/min
- X and Z axis thrust (continuous): 3,7 kN and 4,45 kN
- Turret tool disc diameter: 340 mm
- number of tool stations: 12
- turning tool shank dimensions: 20 x 20 mm
- max. boring bar diameter: 32 mm
- travel below centre line: 22 mm
- cross slide width: 213 mm
- width over linear quide ways: 187 mm
- bed width (over linear guide ways): 304 mm
- coolant tank capacity / delivery: 63l / 45l/min at 3 bar
- mains power consumption: 22 kVA
- main spindle should be changed
- for further information see pictures
1996
used machinery auction RESALE 3,200 €  
  DE   request
125484138 209

WEEKE Optimat BHC VENTURE 3 for sale
CNC machining center


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2005
10,000 €  
  DE   request
125460807 103

FORMAT UF 250 for sale
Tool Room Milling Machine - Universal


x-travel: 900 mmy-travel: 250 mmz-travel: 450 mmturning speed range - horizontal: 50 - 1700 U/minturning speed range - vertical: 50 - 1700 U/minmilling-head swivable +/-: 90° spindle taper ISO: 40 table surface area:  ...
used machine
 
x-travel: 900 mm
y-travel: 250 mm
z-travel: 450 mm
turning speed range - horizontal: 50 - 1700 U/min
turning speed range - vertical: 50 - 1700 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 40
table surface area: 1250 x 250 mm
total power requirement: 4,2 kW
weight of the machine ca.: 1,5 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125480020 1300

RULLI macchine da stampa for sale


Rollers for offset printing machines We are looking for expressions of interest to be submitted within the next 26 June 12:00 Nr. 20 rollers for web offset prints so detailed: Quantity 1 x KBA 618 MAC Quantity 2 x SU ...

 
Rollers for offset printing machines
We are looking for expressions of interest to be submitted within the next 26 June 12:00
Nr. 20 rollers for web offset prints so detailed:
Quantity 1 x KBA 618 MAC
Quantity 2 x SUNDAY 64P Mac. initials H
Quantity 2 x SUNDAY 64P Mac. abbreviation or
Quantity 1 x SUNDAY 64P inc. the acronym
Quantity 1 x SUNDAY 64P Mac. abbreviation P
Quantity 1 x SUNDAY 64 DOS L
Quantity 1 x SUNDAY 64 MAC H
Quantity 1 x SUNDAY 64 INC the
Quantity 1 x SUNDAY 64 INC J
Quantity 2 x MHI 48 DOS WP
Quantity 1 x Mitsubishi 48P inc. F1 abbreviation
Quantity 2 x Mitsubishi 48P inc. acronym F2
Quantity 2 x Mitsubishi 48P inc. acronym F3
Quantity 2 x SUNDAY 64P dos. initials L
For more information contact us at 0307751645 during office hours Mon. – Fri. 9-13:14-18
 
Price  
  IT   request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
125479897 1405

Trolley, chain hoist, crane and hoist


Tensile strength: 500 kg Please refer to the illustrations for more details (see type plate) or on request. Pick up in Neubrandenburg, delivery possible. Loading possible. More information on request, sales as sho ...

 
Tensile strength: 500 kg

Please refer to the illustrations for more details (see type plate) or on request.
Pick up in Neubrandenburg, delivery possible. Loading possible.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
 
Price  
    request
125460774 210

WEINIG Unicontrol 6 CNC Spindeln for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmweight: 4300 kgWeinig Unicontrol 6 with CNC-spindle with full options/features!Cut-off saw-----------------motor: 3 KWspindle diameter 40 mm ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
weight: 4300 kg
Weinig Unicontrol 6 with CNC-spindle with full options/features!

Cut-off saw
-----------------
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 2.800 Upm
tool diameter max.: 400 mm
horizontal adjsutment variable by control

length stop CNC controlled 3500 mm
------------------------------------------------------------

Tenoning spindle
---------------------------------
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 3.500 Upm
tool diameter max.: 320 mm
Usable length of spindle 320 mm
Adjjustment by CNC-axis axial variable max. 240 mm for IV 68-92
adjustment speed approx. 50 mm/sek.
Number of tool postion variable because of CNC axis

1. profiling spindle (turning direction in both directions)
--------------------
Clockwise running for rip-off free stormproofing
Switsch for turning in normal direction for normal milling
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 6.000 Upm
tool diameter max.: 232 mm
tool zero cycle 112 to 140 mm
Usable length of spindle 120 mm
Number of tool positions

2. Profilspindel
--------------------
motor: 11 KW
spindle diameter 50 mm
spindle turnings: 6.000 Upm
Max. tool diameter with zero cycle 112 mm: 210 mm
Max. tool diameter with zero cycle 140 mm: 232 mm
usable spindle length: 320 mm
Adjjustment by CNC-axis axial variable max. 240 mm for IV 68-92
adjustment speed approx. 50 mm/sek.
Number of tool postion variable because of CNC axis

3. spindle: grooving aggregate from top, horizonal and vertical clocked
------------------------------------------------------------------
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 5850 Upm
adjustment way axial: 30 mm
adjustment way radial: 125 mm

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

4. profiling spindle
--------------------
profiling spindle vertical right
motor: 3 KW
spindle diameter 40 mm
spindle turnings: 5850 Upm
tool diameter : 210 mm
usable length 160 mm, 3 tools
adjustment way radial: 100 mm
adjustment way axial: 115 mm

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

5. spindle: groowing aggregate from bottom side
--------------------

Radial clocked on 8 positions by pneumatc revolver
Axial clocked on 8 positions by pneumatc revolver

More features:

- equipment for stormproofing of presses sashes
- Automatic turnng of the work pieces with lammella conveyour
- PC-control / NEXUS:
- laser lighter for cut-off saw
- studio window equipment (not straight windows)
- double piece package
- bars support in profiling unit
- carriage for profiling small sashes smaller 500 mm

Option:
LEITZ IV 78/90 Holz und Holz-Alu

(techncial details according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125479889 801

HEIDELBERG SORM for sale


D189 HEIDELBERG SORM (year 1991) SN 533289 / Format 520 x 740mm/ Alcohol dampening with Technotrans / Weko T6 powder spray / Suction drum in delivery / App. 51 mio. Impressions. Machine in very good working conditi ...
used machine
 
D189 HEIDELBERG SORM (year 1991)
SN 533289 / Format 520 x 740mm/ Alcohol dampening with Technotrans / Weko T6 powder spray / Suction drum in delivery / App. 51 mio. Impressions.
Machine in very good working condition, free of damages.
Available: Immediately. (test is possible)
Location: Belgium
1991
Price  
  BE   request
125460503 109

PFAUTER P 630 for sale
Gear Hobbing Machine


Weight approx.: 15000 kgcontrol: SIEMENS S7 table diameter: 550 mmDimensions (l x w x h) approx.: 7000 x 2400 x 3000 mmhob turning speeds: 45 - 280 RpmDescription: PFAUTER P 630 Gear Hobbing Machine - diameter of table b ...
used machine
 
Weight approx.: 15000 kg
control: SIEMENS S7
table diameter: 550 mm
Dimensions (l x w x h) approx.: 7000 x 2400 x 3000 mm
hob turning speeds: 45 - 280 Rpm
Description: PFAUTER P 630 Gear Hobbing Machine
- diameter of table bore: 125 mm
- diameter of workpiece arbor: 36 mm
- biggest hob (diameter/length): 192 / 230 mm
- axial distance between cutter and workpiece (min/max): 50 / 425 mm
- taper: morse 5
- biggest cutter travel: 200 mm

feed:
- axial feed: 45 - 280 rpm
- radial feed: 0,10 - 1,60 mm/part rotation
- tangential feed: 0,14 - 2,24 mm/part rotation

ATTENTION: tools are not in scope of delivery!
- control has been changed in 2012 to SIEMENS S7!
- for further information see pcitures as well as PDF (German only!)
- machine: 4000 x 2200 x 3000 mm
- weight: aprox. 12000 kg

- control cabinet: 1200 x 1000 x 2400 mm
- weight: 800 kg

- hydraulic: 1000 x 1000 x 2000 mm
- weight: 700 kg
- 4 pallets 1800 x 1400 x 1000 mm
- weight pro pallet approx. 400 kg
1978
used machinery auction RESALE 23,000 €  
  DE   request
125479887 801

HEIDELBERG MO-E for sale


D150 HEIDELBERG MO-E (year 1990) SN 609450 / Format 480 x 650mm / Conventional dampening / Weko T6 powder spray / Suction drum in delivery / App. 28 mio. Impressions. Machine in very good working condition, free of ...
used machine
 
D150 HEIDELBERG MO-E (year 1990)
SN 609450 / Format 480 x 650mm / Conventional dampening / Weko T6 powder spray / Suction drum in delivery / App. 28 mio. Impressions.
Machine in very good working condition, free of damages.
Available: Immediately. (test is possible)
Location: Belgium
1990
Price  
  BE   request
125460504 109

ROTOX EPA 376 for sale
Machine Tool


Weight approx.: 300 kgDimensions (l x w x h) approx.: 1600 x 1500 x 1500 mmDescription: - profile width: min. 40 mm up to max. 120 mm - profile height:max. 100 mm - operating pressure: 7 bar - mains connection:400 V, 4.  ...
used machine
 
Weight approx.: 300 kg
Dimensions (l x w x h) approx.: 1600 x 1500 x 1500 mm
Description: - profile width: min. 40 mm up to max. 120 mm
- profile height:max. 100 mm
- operating pressure: 7 bar
- mains connection:400 V, 4. 2 A, 50 Hz (three-phase current)
- Control: PLC with bus coupling to I/O modules, KLÖCKNER-MÖLLER
- attention:technical data without guarantee!
- for further information see pictures as well as PDF
1991
used machinery auction RESALE 100 €  
  DE   request
125479882 2500

MACCHINARI ATTREZZATURE for sale


For sale exclusively on next 26/06/2018,at 10-30 in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ...

 
For sale exclusively on next 26/06/2018,at 10-30 in Bergamo (BS)
For more information contact us at 030 – 7751645 between 9-13, 14-18
MACHINERY:
-5 Slot machines
-lot composed # 4 Jukebox with cd
-Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001
-pallet truck 2000 kg pallet truck 2000 kg
-lot workshop
Equipment:
-metal shelf L = 120, 6 2 uprights and shelves
-Iron shelving, shelves and uprights 48 16 L = 120
-iron and wood stair with landing, 4 risers, trundle
-Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120
-aluminium staircase with landing
-Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150... ETC, etc, etc.
-detailed catalogue Available.
 
4,635 €  
  IT   request
125460508 205

FORMAT 4 profit H350 16.50 for sale
5-Axis Machining Centre


Weight approx.: 9000 kgDimensions (l x w x h) approx.: 8590 x 4060 x 2600 mmsoftware: Woodflash working length x-axis: 5000 mmworking width y-axis: 1500 mmworking height y-axis: 150 mmmain spindle: 12 kWtool changer: 18- ...
used machine
 
Weight approx.: 9000 kg
Dimensions (l x w x h) approx.: 8590 x 4060 x 2600 mm
software: Woodflash
working length x-axis: 5000 mm
working width y-axis: 1500 mm
working height y-axis: 150 mm
main spindle: 12 kW
tool changer: 18-fach / 18-fold + 10-fach / 10-fold
vacuum pump: 90/108 cbm/h
drilling head vertical x-axis: 7 piece
drilling head vertical y-axis: 5 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
changing unit: ja / yes
edge gluing unit: nein / no
travelling way X-axis: 6000 mm
travelling way Y-axis: 1970 mm
travelling way Z-axis: 455 mm
Description: A young gantry-style CNC machining center with double-sided digital driving portal.

5-axis gimbal electric spindle 12 kW (S6) HSK F63, 24,000 rpm
Automatic central lubrication

Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in Y-direction.
Horizontal 6 spindles:
4 spindles in the X direction and 2 spindles in Y-direction.
Forward stroke = 70 mm, max. Drill length = 70 mm and shank D = 10 mm.
All spindles are individually driven and available.
1 grooving saw - in X- Direction:
Max. Saw blade diameter 120 mm, max. Blade thickness 5 mm, max. number of revolutions infinitely variable up to 7500 rpm.

8 workpiece supports:
with front and rear stop row. Vacuum dual-circuit system with Suction cup height 100 mm.

Positioning display of the workpiece supports and vacuum cups in the CNC board.
The exact position of the vacuum cups on the workpiece supports is indicated by laser.

Hand-held terminal for controlling the axle speed incl. Emergency stop switch

Safety system with photocell on the front

18-fold plate changer traveling in X:
Max. Tool diameter 250 mm
Max. Tool length 280 mm

automatic tool length measuring system
2017
used machinery auction RESALE 27,500 €  
  CH   request
125479866 1402

DUAL LIFT EN1808//P509//CE18 for sale
Wire rope hoist, winch, winch pass


Dual lift winch AS GOOD AS NEW 14 working hours also to passenger transport Manufacturer: Dual lift Year of construction: 2012 Type of winch: EN 1808/P509 / / CE18 Load capacity: 600 kg Line speed: 18 m / min  ...
used machine
 
Dual lift winch
AS GOOD AS NEW
14 working hours
also to passenger transport
Manufacturer: Dual lift
Year of construction: 2012
Type of winch: EN 1808/P509 / / CE18
Load capacity: 600 kg
Line speed: 18 m / min

For further details see nameplate or on request.

Pick up possible. Delivery possible. Loading possible.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
2012
Price  
    request
125457117 102

DMG MORI NTX 1000/SZM for sale
CNC Turning- and Milling Center


turning diameter:370 mmturning length:424 mmcontrol:MSX 711 Mapps IV Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °Travel x/z t ...
used machine
 
turning diameter:370 mm
turning length:424 mm
control:MSX 711 Mapps IV
Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mm
Swivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °
Travel x/z turret 2:155 / 610 mm
Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/50 m/min
Rapid traverse feeds x/z turret 2: m/min
RPM milling spindle:12000 1/min
power capacity - milling spindle:9 / 5,5 kW
Torque of milling spindle:120 / 44 Nm
tool taper milling spindle:Coromant Capto C5
Tool magazine for milling spindle (turret 1):38
Tool change time tool/tool, milling spindle:1,6 s
Turret No.2 stations / rotary tools:10 / 0
Spindle 1 RPM:5000 1/min
Spindle 1 Power:11 / 11 / 7,5 kW
Torque Spindle 1:223/158 Nm
C-axis spindle 1:0,001 °
Bar capacity spindle 1:65 mm
Spindle 2 RPM:6000 1/min
Spindle 2 power:7,5 / 5,5 kW
Torque Spindle 2: Nm
C-axis spindle 2:0,001 °
Parts and total counter:
swing diameter max. over bed cover:730 mm
total power requirement:45 kVA
weight of the machine ca.:8,5 t
dimensions of the machine ca.:6 x 2,7 x 2,4 m
Collet chuck max. ID. spindle 1:Unilock 65 (Hainbuch System) mm
Collet chuck max. ID Spindle 2:Unilock 65 (Hainbuch System) mm
Polygon turning option:
High speed canned cykles for easy programming:
Turret 2 high pressure coolant 20 bar: kW
tool holder:30 x Capte C 5
tool holder:9 x for lower turret
Chip conveyor:
tool setting:
spindle load monitor:
Airblow system:
Interface for coolant through the spindle:
Coolant through spindle 70 bar with filter:SEI International
Coolant cooling system:
Parts catcher:Subspindle
Conveyor for partsdisposal:
Parts and total counter:
Ethernet I/P Interface:
Signal lamp 3 colors:
Barfeeder Interface:
Bar feeder magazine:TOP Automazioni X-Files S 365 P
Spindle 1 Chuck:Kitagawa BB208
Spindle 2 Chuck:Kitagawa B 208
Air Filter:
Hobbing option:
Linear scale x1,y1 and z1-axis:

High performance turning and milling center with multi axis milling head, 38 tool magazine Capto C5, additional lower turret with 10 rotary tool stations, main- and sub spindle, and multi layer bar feeder magazine TOP Automationi X_Files S 365 P for bar diameter of max. 65 mm. The machine is almost as new with about 4500 power on hrs.
2015
Price  
    request
125465521 1707

ARREDI E MACCHINE UFFICIO for sale


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 Furniture: -fixed Chair in technical fabric and iron -two-seater sofa in b ...

 
For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS)
For more information contact us at 030 – 7751645 between 9-13, 14-18

Furniture:
-fixed Chair in technical fabric and iron
-two-seater sofa in blue fabric
-Cabinet height = 140 with two laminated doors
-double L-shaped desk workstation wood laminate
-work station with double circular wood laminate desk with Appendix
-L-shaped desk with wood laminate drawer unit
-laminate and wood coloured iron
-Cabinet with one door L = 215. ... ... ETC, ETC, ETC.
 
4,995 €  
  IT   request
125457121 102

MORI SEIKI DL 25 for sale
CNC Turning- and Milling Center


turning diameter:370 mmturning length:300 mmcontrol:Fanuc 18 TT Spindle 1 RPM:3500 1/minSpindle 2 RPM:3500 1/minpower capacity:L / R 15/11 kWTurret 1:12 StationenTurret 2:12 StationenBar capacity spindle 1:65 mmDista ...
used machine
 
turning diameter:370 mm
turning length:300 mm
control:Fanuc 18 TT
Spindle 1 RPM:3500 1/min
Spindle 2 RPM:3500 1/min
power capacity:L / R 15/11 kW
Turret 1:12 Stationen
Turret 2:12 Stationen
Bar capacity spindle 1:65 mm
Distance between spindle noses:1340
total power requirement:65 kVA
weight of the machine ca.:10,7 t
dimensions of the machine ca.:5,7x2,4x2,1 m
Chip conveyor:
Parts and total counter:
Automatic tool eye:l & r defect
Automatic separation wall:
Standard set of tool holders:
Power Chuck:2 x 250 mm

High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.
1998
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ORMA models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

HEIDELBERG SORM


D189 HEIDELBERG SORM (year 1991) SN 533289 / Format 520 x 740mm/ Alcohol dampening with Technotrans / Weko T6 powder spray / Suction drum in delivery / App. 51 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

HEIDELBERG MO-E


D150 HEIDELBERG MO-E (year 1990) SN 609450 / Format 480 x 650mm / Conventional dampening / Weko T6 powder spray / Suction drum in delivery / App. 28 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

MACCHINARI ATTREZZATURE


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001 -pallet truck 2000 kg pallet truck 2000 kg -lot workshop Equipment: -metal shelf L = 120, 6 2 uprights and shelves -Iron shelving, shelves and uprights 48 16 L = 120 -iron and wood stair with landing, 4 risers, trundle -Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120 -aluminium staircase with landing -Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150....... ETC, etc, etc. -detailed catalogue Available.

ARREDI E MACCHINE UFFICIO


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 Furniture: -fixed Chair in technical fabric and iron -two-seater sofa in blue fabric -Cabinet height = 140 with two laminated doors -double L-shaped desk workstation wood laminate -work station with double circular wood laminate desk with Appendix -L-shaped desk with wood laminate drawer unit -laminate and wood coloured iron -Cabinet with one door L = 215. ... ... ETC, ETC, ETC.

Injection molding machines sumitomo japan ( electirc SE130EV-C360HP


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI OF GNB IN KOREA

Self-Cleaning Disc Separator Alfa-Laval BRPX 617


Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties CONTROL Cabinet available

Profile rollers SAF SE 101 HP


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses Compac HP 60


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Band Saws Imet / Tuwi BS 280 plus


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Punching Machines Peddinghaus 502


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Convential milling machines Deckel FP2


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Press Brakes Haco PPH 2560


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Center lathes Weiler Commodor


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Center lathes Bulmak CU 587


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Guillotine shears Darley GS 3110


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Rinser PROCME SA/36


Output: 10000bottles/h, bottle formats: 0.35-1l, bottle diameter: 63.5-93mm, bottle height: 216.5-340mm.

HEIDELBERG SBG


S859 HEIDELBERG SBG (year 1961) Format 56 x 77cm / with all standard tools and books. Available: Immediatly Machine in good working condition, free of damages.

HEIDELBERG SBG


S859 HEIDELBERG SBG (year 1961) Format 56 x 77cm / with all standard tools and books. Available: Immediatly

Heidelberg SORMZ


ref. 217 Heidelberg SORMZ format 52x74 cm, year 1998, 87 mio. imp., alcohol dampening, 10 000 s/h, stock range 0,03-0,8 mm, print test possible, price: 34 000 EUR FCA

Grit blasting cabin diverse


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic press brakes Safan CNCS 110-3100


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Guillotine shears Safan HVS310-13 / 16


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Welding Robots diverse


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Concrete paving stone production line HENKE HERMETIK SILENTA SADP 50/300/6


Line for the production of paving tiles from the concrete HENKE HERMETIK SILENTA SADP 50/300/6 was produced in 1982. Line-specific data HENKE HERMETIK SADP SILENTA 50/300/6: -performance line: 800 PCs./day-line mode: semi-manufactured items: 2-ply line has molds for the production of tiles in size:-40 x 40 cm-50 x 50 cm-40 x 60 cm-50 x 25 cm The line includes:-Control Panel-set of forms-production-safe metal-Kit metal and rubber, 3 designs -the receiving machine, plate type HERCULES

CNC Plasma Cutting Machines MACCHINA TAGLIO PLASMA REDCOM


REDCOM PLASMA CUTTING MACHINE MAKE MODEL YEAR 2008 Redcom EVL 25 18 Modular double Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Planetary mixers Tonelli 400


-industrial -year 1999 Picture and more information on request

TORNIO HAWK TC 150 M Cincinnati Machine


LATHE HAWK TC 150 M Cincinnati Machine BRAND MODEL TC 150 150 200 YEAR Lathe Hawk HAWK-M complete with: Basic machine with CNC Fanuc 21i-TA Government Supply voltage 400V 50 Hz drip shavings, 12 positions VDI 30 turret to 5-7.5 KW-5500g "ASA spindle/1 ' Autocentrale to 3 jaw Chuck ø 52 mm. radial tool Kit Tools including: form B1, reduction sleeve. For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


ALUMINUM MELTING FURNACE BRAND Marconi MODEL RR14 1680/00 YEAR 2000 Technical Data: Kcal/hour 280000 Temp. Max 999 C° Gas supply For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE MAICO


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Circular Sawing Automatics Abcd Machinery AUTOCUT550


AUTOCUT 550 Automatic sawing machine with automatic feeding for cutting at 90°. Equipped with automatic feeding system fitted with Brushless moter driven by numerical control “touch screen”. Bar-end detection device. Clamping of the bar by “bridge” system. Possibility to load and save cutting lists in CSV format with USB and ETHERNET connectivity. Spray mist lubrication (Venturi). Threephase motor 5,5KW.

Plastic injection machines LIANSU LSE92/188


Production line for PVC pipes LIANSU LSE92/188 from fi 200 to fi 500 performance ok. 500 kg/h, line pipe homogeneous. The line of PVC LIANSU LSE 92/188 consists of: -extruder: Liansu LSE92/188 -bath tub vacuum -cooling bath -extraction: SICA C500 -saw: SICA TRS 100-500 -kielichuj?cy: SICA BA. CA. 1T. H 100-500 Technical data: -production performance: 300-600 kg -capacity: 160-500 mm

Pallet transport line EUROPA SYSTEM 20.101122.01


Line for pallet transport EUROPE 20.101122.01 SYSTEM was built in the year 2011. The line is intended for the transport of EURO pallets with details that may protrude beyond the skid up to 200 mm, the performance line-to 74 pallets for a change. The line is used for the transport of EURO pallets of goods with the indirect their handling by the operators. Transport takes place on a conveyor line [1.1]-[1.7]. The system consists of: -pallet roller conveyor loading zone [1.1] -a team of two chain conveyors [1.2, 1.3] -non-driven medium roller roller conveyor [1.6] -chain conveyor accumulation of nep?dem [1.7] -gravity roller conveyor [3] -pallet storage built onto conveyor roller [5] -roller conveyor driven [5] -gravity roller conveyor [6] -non-driven medium roller roller conveyor [1.6] -ball tables, used for the transport of EURO pallets conveyor conveyor [7.1, 7.2] Pallet storage lines are used to transport items on pallets. Pallet magazine can fulfill two functions to retrieve the pallets from the line and collected a heap or stack download pallets and then issuing a pallet lines one at a time. Pallet magazine EUROPA 20.101122.01 SYSTEM-technical data: -the maximum stack weight: 600-1000 kg -maximum number of pallets collected by the magazine: 10-25 -operating pressure: 6-8 bar

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

HP Main PCA Formater Latex L 25500 HP Q6651-60282


HP - Main PCA Formater Latex L 25500 HP - Nr. Q6651-60282

HP Formatter Board Z 200 HP Q6718-60047


Neue HP - Formater Board für Designjet Z 3200 / 24/44 Zoll Geraete HP - Nr. Q6718-60047 / Neu

PRESSA PER PRESSOFUSIONE MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from hours 8:30 at 13:00 and 14:00 at 19:00

Forno Marconi


Aluminum melting furnace Marconi Brand: Marconi Model: 1680/00 AR14 Year: 2000 Technical Data: -280000 Kcal/hour -Temp. Max 999 C° -Gas supply For more information and machinery vision contact us at + 39 030 725026 from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Veneering presses ORMAMACCHINE P.F/1


Code: 0362 Brand: ORMAMACCHINE Model: P.F/1 Cold press Platens dimension mm 2500 x 1300 Opening mm 500 Electric platen lifting Thrust tonn 15 Overall dimensions: mm 2850 x 1450 x 1950 h Weight kg 1000

Plastic injection machines LIANSU L-26


PVC pipe production line LIANSU L-26 (1992-2012) is a homogeneous tube. PCV line LIANSU L26 consists of: -boring machine LIANSU/LSE 92 188 -vacuum CINCINNATI/VA630-6 -cooling bath CINCINNATI/SP630-6 -cooling bath CINCINNATI/SP630-6 -extraction of CINCINNATI/C800 -saw CINCINNATI/TRS110-800 -CINCINNATI/BA. CA. 1T110-630 Technical data: -production performance: 300-600 kg -capacity: 200-630 mm

Plastic injection machines THYSON L-25


Production line for PVC pipes THYSON L-25 (1993/2000) is a line of three pipes. PCV line THYSON L25 consists of: -extruder THYSON/PAR 2-88 -extruder side METALCHEM/2T14/8 m -REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KE25/4 -saw SICA/TSQ -REIFENHAUSER kielichuj?cy/BA. CAH. 1T 50.250 -dust Extractor SICA model P-250/4 Technical data: -production performance: up to 350 kg -capacity: 75-250 mm -reconditioned in the year 2016

Plastic injection machines THYSON L-19


Production line for PVC pipes THYSON L-19 (1990/2009) is a line of homogeneous pipes. The line consists of: -extruder THYSON/COUPLES 130 -bath tub vacuum -cooling bath -dust Extractor PIN YING MACHINE/PTA 500-6 -saw SICA/TRS 100-500 kielichuj?cy-IPM/BA/500/ME/1F Technical data line PVC THYSON L19: -production performance: 300-600 kg -capacity: 110-500 mm

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Frozen meat grinders GEA Powergrind 280


The GEA PowerGrind 280 is a powerful industrial grinder for fresh and frozen goods, which minimizes dust and fines, and manages the meat up to-25 ° C. There is less dust and fines, and not suiffage. The great feeding area minimizes the risk of formation of arch and allows loading the machine with up to 10 standard meat blocks (30 kg) of a sudden The machine comes with a reducer in advance, a screw of new grinding, many grills and knives.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm
Find used machinery dealers in your country