british flag
Resale Logo

OMP used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used rubber machines  SGT SERVIS,spol.s r.o.  http://www.sgt.cz 
banner logo
start page > keywords OMP > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465382 101

DMG DECKEL MAHO DMC 50 V for sale
Numerically Controlled Machining Centres


Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country ...
used machine
 
Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country of origin Germany
Delivery time immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z trail 500 mm control dialog 112 table size 1 table: 700 x 400 mm speed range - milling power 0-15000 rpm tool holder SK 40 - Milling spindle 15 kW who kzeugwechsler - places: 30 stations feed range 1-10000 mm / min rapid traverse x and Y-axis 30 m / min rapid traverse Z axis 20 m/min total power 25 kW machine weight 7000 kg space requirement approx. 3400 x 3400 x 2900 mm accessories electronic hand wheel conveyors Centre ralschmierung RS 232 data interface coolant system complete machine documentation work light description with control dialog 112
BEAUTIFUL MACHINE

1995
13,000 €  
    request
125465218 903

NEW HOLLAND Roll-Belt 150 764 Baler for sale
Round baler New Holland Roll-Belt 150 764 Baler


Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condi ...
used machine
 
Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition.
2015
24,950 EU?  
  PL   request
125465380 103

ELU KF 187 for sale
Copy Milling Machines


gebr. Coping machine make ELU Model KF 187. No.: 7000 year 1984 Milling length 420 mm Cutting width 240 mm 250 x 250 mm clamping range Cutting height 240 mm Stencil 300 x 650 mm 1 Milling spindle 740 W S ...
used machine
 
gebr. Coping machine make ELU
Model KF 187. No.: 7000 year 1984

Milling length 420 mm
Cutting width 240 mm
250 x 250 mm clamping range
Cutting height 240 mm
Stencil 300 x 650 mm
1 Milling spindle 740 W
Spindle speed 12,000 rpm
Compressed air supply 7 bar
External dimensions:
Length 1000 mm
Width: 1000 mm
Height 1400 mm
Weight approx. 260 kg
With:
Spraying device
Pneum.. Clamping device

1984
Price  
    request
125465225 402

TS INTERNATIONAL-ITALY Entrance for sale
Line packing and inserting Entrance Syspac


The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found  ...
used machine
 
The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.
2009
66,600 EU?  
  PL   request
125465378 103

ELU KF 78 for sale
Copy Milling Machines


gebr. Coping machine make ELU Model KF 78. number: 21461 built 1978 Vertical milling unit: Milling length 290 mm Cutting width 100 mm Milling stroke 120 mm Horizontal milling unit: Milling length 270 mm  ...
used machine
 
gebr. Coping machine make ELU
Model KF 78. number: 21461 built 1978

Vertical milling unit:
Milling length 290 mm
Cutting width 100 mm
Milling stroke 120 mm
Horizontal milling unit:
Milling length 270 mm
Cutting width 70 mm
Milling stroke 120 mm
Profile width max. 150 mm
Profile height max. 150 mm
2 milling spindles per 740 W
Spindle speed 12,000 rpm
Compressed air supply 7 bar
External dimensions:
Length 800 mm
Width 1100 mm
Height 1300 mm
Weight approx. 250 kg
With:
Spraying device
Pneum.. Clamping device


1978
Price  
    request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125460555 109

Complete Powder Painting/Coating Line


Weight approx.: 10000 kgDimensions (l x w x h) approx.: 15000 x 3000 x 3000 mmDescription: Consisting of powder baking oven Wälti (Internal dimesnions: 6200 x 1500 x 2500 mm), overhead conveying system, ITW Gema powder  ...

 
Weight approx.: 10000 kg
Dimensions (l x w x h) approx.: 15000 x 3000 x 3000 mm
Description: Consisting of powder baking oven Wälti (Internal dimesnions: 6200 x 1500 x 2500 mm), overhead conveying system, ITW Gema powder spraying unit, spray cabin / extraction wall, transport trolleys as well as a big lot of coating powder as per pictures
 
used machinery auction RESALE 2,000 €  
  CH   request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125460601 1900

Workbench with Contents


Weight approx.: 250 kgDimensions (l x w x h) approx.: 2000 x 950 x 1050 mmDescription: With robust wooden plate 2000 x 700 mm, mounted vice, jaw width 150 mm, contents: various measuring instruments, consisting of calipe ...

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 2000 x 950 x 1050 mm
Description: With robust wooden plate 2000 x 700 mm, mounted vice, jaw width 150 mm, contents: various measuring instruments, consisting of calipers, depth gauges, marking compasses, brackets, see photos for details
 
used machinery auction RESALE 45 €  
  DE   request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125460395 1900

Lot of Gauge Block Boxes


Weight approx.: 7 kgDimensions (l x w x h) approx.: 300 x 200 x 50 mmDescription: 2 pcs., partly incomplete, see photos for details

 
Weight approx.: 7 kg
Dimensions (l x w x h) approx.: 300 x 200 x 50 mm
Description: 2 pcs., partly incomplete, see photos for details
 
used machinery auction RESALE 25 €  
  GB   request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125457901 112

MAAG SH 250/300 S for sale
Gear Shaper


max. wheel diameter:3080 mmmin. wheel diameter:200 mmgear width:670 mmgear width:870 (Drehklappe) mmmax. module:50 (Generating-Fräser) max. module:25 (Profilfräser) max. number of teeth:1000 min. number of teeth:12 too ...
used machine
 
max. wheel diameter:3080 mm
min. wheel diameter:200 mm
gear width:670 mm
gear width:870 (Drehklappe) mm
max. module:50 (Generating-Fräser)
max. module:25 (Profilfräser)
max. number of teeth:1000
min. number of teeth:12
tool length - max.:ca. 312 mm
min. ram stroke:70 mm
dividing plate diameter:1116 mm
table bore diameter:420 mm
table travel max.:2 x 460 = 920 mm
ram stroke speed:3,2 - 40 m/min.
max. ram stroke:700 mm
table load:15000 kg
Ram strokes per shifting:8 - 150
depth of hole:1200 mm
max. wheel diameter:3300 (Innenhobeln) mm
max. dia. of teeth cutting:2940 (Innenverzahnung) mm
Distance between head and table:1180 mm
gear width:365 (Innenhobeln) mm
clamping table diameter:1100 mm
helical adjustment of ram:unbeschränkt °
max.helical angle:35 (Drehklappe) °
dimensions of the machine ca.:6550 x 4275 x 3310 mm
power capacity:71 kW
weight of the machine ca.:38000 kg
chip conveyor: 1
Local rim support (swivel head mounted): 1
Local rim support (bed mounted): 1
Internal gear cutting attachment JVS-250: 1
Work base plate Ø1800 mm: 1

The machine is practically new and will be delivered with a precision chart. Cutting quality DIN 7! The main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. The outstanding economy of the MAAG SH 250/300 S derives from the high metal removal rate (for material until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. After the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. And that makes it in most of all cases possible, to avoid grinding. With the full swivel cutter ram, any desired helix angle can be set. The finishing generating operation yields a very good tooth accuracy in short machining time. The machining cycles for the plunge cut and the generating operations take place automatically. The vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. The cutter ram is driven by a DC reversible motor via a 7-start spindle. The machine is equipped with a swivelling cutter holder DS-250. Helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter. When using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced.
1982
Price  
    request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125456645 702

W & P Wickelmaschinen - Hörnchen for sale
automatic dough dividing + moulding machine, fabr.


computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, bag ...

 
computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More OMP models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Hydraulic Presses Compac HP 60


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Dishwashers Pebock UGD-25


Description Mark PEBOCK UGD model-25 ID 30122/142 Status Active €1,500 price + VAT Year 2008 Location Of Oradea (RO) Washing machine UGD-25 Pebock shuttles from 2008 in damage, with the engines. The electronic system is complete. ExWorks. Price is negotiable and do not include VAT. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Watching the product schedule 24 hours prior. We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Grid production line MASZYNY S.C. LS 6/4


Line for manufacturing of grid forest MACHINE S.C. LS 6/4 was produced in 2006. Characteristic parameters of the line to the netting machine S.C. LS 6/4: -ability to produce L-type grids; M; S Construction grid for type "L": -on the machine so far carried out configurations: 150/14/15 L; 160/20/15 L; 160/23/15 L; 180/20/15 L; 180/23/15 L -wires: fi. 2.0 mm/1.6 mm -maximum height: H = 200 cm The design of the grid for the type "M": -on the machine so far carried out configurations: 120/13/30 M; 120/13/15 M; 160/15/15 M; 160/15/30 M; 160/20/15 m; 160/20/30 m; 160/23/15 m; 160/23/30; 200/17/30 m; 200/17/15 m; 200/22/15 m; 200/22/30; 200/25/15 m; 200/25/30 m -wires: fi. 2.5 mm/2.0 mm -maximum height: H = 200 cm Construction grid for type "S": -on the machine so far carried out configurations: 120/13/15 S; 200/17/15 S; 200/20/15 S; 200/22/15 S; -wires: fi. 3.0 mm/2.5 mm -maximum height: H = 200 cm-capacity: depends on the type of mesh-medium: 4 rolls/h -the line is complete: the machine, line-construction growing, bucks on vertebrae wire snap-in-staple gun (binding end of the grid to roll), compressor

TORNIO HAWK TC 150 M Cincinnati Machine


LATHE HAWK TC 150 M Cincinnati Machine BRAND MODEL TC 150 150 200 YEAR Lathe Hawk HAWK-M complete with: Basic machine with CNC Fanuc 21i-TA Government Supply voltage 400V 50 Hz drip shavings, 12 positions VDI 30 turret to 5-7.5 KW-5500g "ASA spindle/1 ' Autocentrale to 3 jaw Chuck ø 52 mm. radial tool Kit Tools including: form B1, reduction sleeve. For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Diesel engines MAN D2866 LF05


MAN D2866 LF05 COMPLETE DIESEL ENGINE ENGINE IS RECENTLY OVERHAULED. READY TO WORK. EXWORKS TUZLA / ISTANBUL - TURKEY. READY FOR SHIPMENT.

Diesel engines CATERPILLAR 3412 DT


CATERPILLAR 3412 DT COMPLETE DIESEL ENGINE. ENGINE IS RECENTLY OVERHAULED. READY TO WORK. EXWORKS TUZLA / ISTANBUL READY FOR SHIPMENT

Tube Bending Machines TELHOO CNC DW63NC


Pipe Bender TELHOO CNC DW63NC was produced in 2010 year. Complete tooling for bending 15 mm diameter and with different bending radii. The machine is suitable for the spindle (actuator to the introduction and pulling). Characteristic parameters of CNC bending machine TELHOO DW63NC: -diameters of bent tubes: up to 63 mm -the thickness of the wall of bent tubes: up to 4 mm -the maximum bending angle: 190 degrees -bending radius: up to 350 mm -power: 5.5 kW -overall dimensions: 3500 x 750 x 1100 mm -weight: 1500 kg

Pneumatic air forging hammer ZAMECH ELBLAG MS 160


The hammer compressor ZAMECH ELBLAG MS 160 built was in the year 1962 by ZAMECH.

Pneumatic air forging hammer STANKOIMPORT MA 4129 A


Jackhammer STANKOIMPORT is 4129 and was produced in 1986. Sledgehammer compressor STANKOIMPORT is 4129 A-technical data: -the impact: 63 tons

Heidelberg QUICK PLATER


Main board and other electronic components. Can ship worldwide.

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

CNC Milling Machines Elumatec 2009


Profile machining centre SBZ 130 eluCam Description 3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces The on-board turret head ensures that tool changing times are kept very short, thereby optimising machining cycles The turret head can be equipped with eight tools or angle routing heads Automatic clamping adjustment enables the machine to position the material clamps 3-axis controller The tool spindle is designed as an additional axis Network connection Technical specifications Traverse path X-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm (additional lengths on request) Vmax. 60 m/min. Traverse path Y-axis, 485 mm, Vmax. 30 m/min. Traverse path Z-axis, 340 mm, Vmax. 30 m/min. Max. spindle speed 6,000 rpm, 18,000 rpm with high-speed spindle Spindle power output 5.5 kW Tool changer for eight tools on a turret head Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 35 A Air consumption per minute 100 l with spraying Machining length SBZ 130 – 7.2 m Max. machining length with profile end machining, 7,080 mm Max. machining length without profile end machining, 7,200 mm

Rolling mills ZGODA 550L


Rolling machines for rubber CONSENT 550L built in 1967 by the Polish Factories of technical equipment CONSENT in ?wi?toch?owice. The machine has undergone complete renovation in the year 2016 for a total of $118000 NET. The scope of the renovation include gears, bearings, lubrication and a wardrobe. Technical data of rolling mills, rubber CONSENT 550 L: -roll length: 1500 mm -diameter of the rolls: 550 mm -engine power: 100 kW

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Elumatec 2011


Profile machining centre SBZ 140 Description 4-axis profile machining centre Designed for economical and efficient machining of aluminium and thin-walled steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces Machining with all tools at angles continuously adjustable from 0° - 180° The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles The magazine can be equipped with eight tools A rotating angle head with two different tools is available for double-bar and end machining (0°?-?90°?-?180°?-?270°) (option) Two separate working zones enable machining in shuttle operation (option) 4-axis controller 15" colour display, USB ports and network connection Windows operating system Technical specifications Traverse path X-axis, 4,200 mm, 6,400 mm, 7,600 mm, 9,700 mm (additional lengths on request) Vmax. 65 m/min. Traverse path Y-axis, 850 mm, Vmax. 60 m/min. Traverse path Z-axis, 650 mm, Vmax. 60 m/min. Pivoting angle A-axis, 0° - 180°; freely programmable in 1/10° steps Max. spindle speed 24,000 rpm Spindle power output 11 kW, S1 Tool changer for eight tools, additional tool positions on request Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 63 A Air consumption per minute 180 l with spraying Machining length SBZ 140 - 9.7 m Max. machining length with profile end machining, 9,580 mm Max. machining length without profile end machining, 9,700 mm MACHINE IS PERFECT CONDITION. SET UP TIME IS END OF 2012. NOT USED SO MUCH AND FULL FUNTIONALITY.

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Heidelberg Speedmaster 52-4


-Four colours STRAIGHT machine max paper size 37x52 cms. -Year 1998, 70 mil. impressions -Alcolor dampening with refrigeration system -Autoplate, Cptornic, CPC 1.04, Automatic washing devices -Plate punch and bender,Powder spray, in production -Complete with all accessories

Gas generators Caterpillar 3520


2055 KW Caterpillar 3520 Gas Generator in Super Insulated Enclosures Eight (8) 2055 KW Caterpillar G3520 Natural Gas Generators in Super Insulated Arctic Enclosures, 2055 KW Caterpillar 3520 natural gas engines with KATO Generators, 2671hp, 60 Hz, 13.8 KV, 1800 rpm, 60 HZ, 0.7PF. year 2009, Hours range 1300 to 2600 since new. Each generator package has its own Super Insulated Arctic Enclosure and designed to operate in severe cold conditions. Mufflers, Batteries, Battery Chargers, Oil Heaters, Prelube System, Water Pumps, Woodward Governor, panels, ABB Medium Voltage Switch Gear and Allan Bradley Motor Control Center and much more. Lots of equipment included with this package. Fast set up to generate immediate power. Excellent Condition, Great Buy on this Complete Package.

CNC Milling Machines INFOTEC 3121 PRO


CNC milling-milling plotter INFOTEC 3121 PRO was built in the year 2016. Plotter is designed for 2D and 3D milling materials that lend themselves to machining. These could be e.g.: composites, pleksa, dibond, tubond, PVC, ABS, teflon, nylon, resin, PRO LAB, korian, aluminum, brass, bronze, steel construction (engraving), mdf, hdf, plywood, particle board, solid wood and other materials like wood. Technical data for CNC milling machines INFOTEC 3121 PRO: -dimensions of the working field of machinery gave the X and Y axis: 2100 x 3100 mm jump in the Z axis: 500 mm -the speed of the machine is X, Y, Z: 60, 60, 12 m/min. -overall dimensions: 4280 x 2900 x 3500 mm -weight: 3300 kg Milling Centre InfoTEC 3121 Professional-sample application: -cieci? of furniture panels -production of furniture fronts -production of furniture -production of façade -aluminium profiles

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Roland 706 3B LV Direct Drive


ref. 611 Roland 706 3B LV Direct Drive format 74x104 cm, year 2007, 285 mio. imp., serie 751, no perfection 6-0, automatic non stop, Technotrans Beta C, Alcoprint 3000, Technotrans ink umits temperature control, all 3 automatic washers, Becker compressors, CCI, CIP, IR dryer, Grafix powder spray unit, Tresu coater system, in production, price: 565 000 EUR FCA

Universal Lathes Up To 800 Mm Diameter Poreba TCA-1600/6000


The device is used for machining the outer, inner and front surfaces of rotary components of larger shaft and flange diameters, threading. POREBA - TCA 160/6000 - 1962 - d1600/6000 - 2-3 steadies

CNC Bending Presses LVD PPBL 200/30


Press brake LVD PPBL 200/30 manufactured in 2000. The machine allows you to fold items on length 3100 mm with the force 200 tons. Control and control cabinet have been completely upgraded in November 2017 (on work carried a guarantee). Early upgrades carried out the company HARTMANN from Germany. Technical data of the press LVD PPBL 200/30: -pressure capacity: 200 tons -bending length: 3100 mm -distance: 160 mm -maximum pressure: 300 bar -power: 11 kW -machine weight: 11200 kg -menu machine and manual work: in Polish language -a complete wiring diagram

Cylinder head MaK 8M35 & 6M35


MaK M35 COMPLETE CYLINDER HEADS FOR SALE. CYLINDER HEADS ARE SUITABLE FOR MaK 6M35 & MaK 8M35 ENGINES. CYLINDER HEADS FULL WITH EQUIPMENTS. READY FOR SHIPMENT.

Bread and biscuit cutting machines REGO-HERLITZIUS ROTO-SHOP


Bread slicing machine-mounted ROTO-SHOP manufacturer REGO-HERLITZIUS. The device the smooth technically, after review, housing stainless steel, on wheels, shelf for sliced bread. EU VAT invoices (%). Possible shipping forwarding company at a price of around 150-200 Euro.

Compressor WITTIG ROL 65


Discharge pressure: 9bar, suction pressure: 1000nbar, volume flow: 315m³/h, shaft power: 35kW, motor power: 37kW, rotational speed: 1475/min, number of available compressors: 2.

Atrezzature edilizia


Construction equipment and tools for Office including: -Kawasaki OHV Generator -circular saw -concrete mixer glass 230 V brand Officine Bragagnolo – year 2002 -230 V hot water spray gun -Tagliamattoni water tour -Miter saw Stihl -Welding machine -plaster sprayer brand Maltech – year 2002 -milling machine/smoother for plaster -pump for plaster -Alzalastre for plasterboard -printer/copier, Monitor keyboard white -PC complete with monitor, keyboard and mouse, PC tower ... ETC, ETC. -for sale exclusively on next June, 19 hours 10-00 IN via Padana Superiore n° 65, Cazzago San Martino (BS) -For more information contact us at 030 – 7751645 between 9-13, 14-18

Vertical Bag Forming, Filling and Sealing Machine KOPP Speedpack Hybride


Foil: tubular foil/ reel bag, foil: PE, PAPE, OPP, composite foil, foil strength: 20-125µm, max. roll/ bag width: 400mm, max. output: 25bags/min, compressed air supply: 6bar, compressed air consumption: 200-500nl/min, length: 1000mm, width: 900mm, height: 1100mm, with touch screen.

Portioner MAREL TVM-Portio 4000


Max. product dimensions: 600x160x100mm, output: 2500-4000portions/h, compressed air supply: 6-9bar, weight: 380kg, including accessories.

Heidelberg Gto 52


-Single colour size 36x52 cms. -Year 1994, 37 mil. copies -Aquatron dampening, plus version -Complete with all accessories

Diesel generators DEUTZ 8M816


4 PCS DEUZT 8M816 COMPLETE GENSETS ARE AVAILABLE FOR SALE READY FROM OUR TUZLA / ISTANBUL STOCKS

Plate And Section Shears KRASSER CENTURIO


Slitting line sheet KRASSER CENTURIO. The individual elements of the lines were built in the years 2008-2011. Thickness to 1.25 mm, the width of the circle to 1.25 m. The line KRASSER: CENTURIO 1. Automatic storage for 6 coils + 1 cargo station (producer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 2. the cutting and cutting-controlled CNC, automatic adjustment of the width and depth of the blade (manufacturer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 3. to set the Table in a stack of 3 m long with automatic lowering (useful when cutting pattern) (2011) 4. compensatory Tower with 2 pneumatic stations (2008) 5. the positioning to the scroll process coils (2008) 6. Cover 12 t with sliding guides to automate movement when scrolling through the coils (2008)

Dry cooler GUENTNER GDF 090.3D/2×7-LD1F/4P.E


GUENTNER GDF 090.3D/2×7-LD1F/4P.E Product number:M18-3174 Cooling capacity:700 kW Number of fans:14 Refrigerant:water/glycol Refrigerant Content:2 x 306 kg Voltage:400 Volt Motor power:14 x 0,47 kW Dimensions:9200 x 2450 x 2850 mm Weight:5000 kg Year:2016 Number in stock:1 piece(s) Price:Quotation request Very young and complete with control box (temperature regulated) Guentner dry cooler with 14 speedcontrolled (EC) fans. Mentioned capacity at +40°C/+30°C (in/out) and air temperature +25°C. Please visit our website: used-refrigeration

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Brew House Equipment, 230 hl/Brew Huppmann / ZVT two brew lines


Brew house equipment Huppmann/ZVU, two lines 230 hl/brew This is a complete brew line for beer made by Czech ZVU in 1990 and heavily modernized by Huppmann 2000. The brewery has two parallel brew lines and they have modern Huppmann Siemens S-7 series PLC based control system. Brewery was closed in the end of 2017 and is still installed. Main equipment •2 pcs Mash tuns volume 200 hl made by ZVT in year 1990 and modernized by Huppmann •2 pcs Pre run tanks volume 245 hl made by ASTRA in year 1990 •2 pcs Lauter tuns volume 230 hl. made by ZVT in year 1990 and modernized by Huppmann •2 pcs Wort kettle volume 230 hl made by ZVT in year 1990 •2 pcs Hob dosing units made by ZVT •2 pcs Whirpools volume 230 hl made by ZVT in year 2000 •Wort cooling system, Alfa Lavale in year 2000 •Ice water tank 21,6 hl made by Astra in 1990 •2 pcs Syrup tanks 26,0 hl made by Astra in year 1991. •Water buffer tanks (for ice, hot

Coordinate Measuring Machine ZEISS WMM 850 S


X-travel: 850mm, y-travel: 1000mm, z-travel: 600mm, compressed air consumption: 10l/min at 5bar, control: C99N/MCC800.

Liquid CO2 Storage Tank 47 m3 E&P Hinke, Hungary with two compressors


Liquid CO2 storage tank 47 m3 with cooling compressors Horizontal storage tank for liquid CO2 with two Bitzer made cooling compressors, valves and pipes. Tank is made of steel and insulated in year 2001 and compressors were changed in year 2013 to Bitzer piston compressor operating with freon R-404A. Technical data Tank manufacturer Hungarian E&P Hinke Manufacturing year 2001 Tank volume 47 m3 Tank empty weight 12800 kg Compressors 2 x Bitzer 4NES-14Y-40 P Refrigerant R-404-A, 10 kg/compressor Compressor year both made in 2013 Ref. flow rate 56.3 m3/h in 50 Hz and 67.9 m3/h in 60 Hz system

GB Power 6 DDR2 533Mhz Memory Modules IBM 15R7445


We have for sale 96 x IBM 15R7445, 4GB Power 6 DDR2 533Mhz Memory Modules More information on request. We have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, ADVA, Alcatel, Brocade, Cisco,Cabletron, Enterasys, Extreme Networks,Huawei, Marconi, Nortel, Qlogic, Avaya We also have available, at any time, large numbers of components by ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco,Cabletron, Enterasys, Extreme Networks,Huawei, Marconi, Nortel, Qlogic, Avaya

Air Bottle 5 m3, 11 bar Otto Klen Gmbh,m Germany Steel tank for compressed air


Air Bottle 5 m3, 11 bar This vertical air bottle is designed to work in max 11 bar airline as an air accumulator. Bottle is made of normal steel and it is galvanized and in good condition Manufacturer German Otto Klen GmbH Manufacturing year 2007 Bottle volume 5000 liters Max. working pressure 11 bar Testing pressure 16 bar

Air Compressor Atlas Copco ZR 315 VSD bar, 50.2 m3/min Variable Speed Drive, 255 kW


Air Compressor Atlas Copco ZR 315 VSD The compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. This compressor has energy saving speed control (VSD) for airflow airflow and it has been manufactured by Atlas Copco Belgium in year 2007. The equipment is a sound canopy and it is controlled with advanced Eletronikon 4 control system. The unit is still installed and in good condition. Technical data Manufactured by: Atlas Copco Belgium Type compressor: ZR 315 VSD Made in year: 2007 Estimated operation hours: 43000 Capacity (FAD): 50.2 m3/min at 8.6 bar Electric motor: 255 kW Shaft speed: 2430 rpm Main dimensions compressor: W x H x L 3.15 x 2.00 x 1.65 m Weight compressor: 4710 kg

PET Bottle Filling Line 36000 bph KHS Innofill, GEA, SIG cabonated and non-carbonated


PET Bottle Filling Line for carbonated or non-carbonated beverages 36000 bph This is a complete blow molding, filling and packaging line for carbonated or non-carbonated beverages having a capacity of 3 500ml with 28mm caps featuring KHS Rinser-Filler-Capper and Paramix Carbonating Blending Skid The heart of this line, the KHS Innofill PET Rinser-Filler-Capper relies on computer-controlled precision technology for careful and accurate filling of your carbonated and still beverages in PET bottles. Using volumetric filling, you can fill bottles to exact fill levels at high speeds with both lightweight and premium PET bottles. This Innofill PET DRV operates as a triblock machine, with a bottle rinser and capping turret. Short times for product and bottle changeovers reduce product losses and improve efficiencies. The KHS Paramix CMX Blending Carbonating System Is suitable for preparing fruit juices, juice beverages, carbonating mineral water and soft drinks allowing for clean, foam-free filling and excellent water deaeration
Find used machinery dealers in your country