We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Technical data Cut range: round up to: 100 mm Band length: 1730 mm Voltage 50 Hz 3x: 220 Volt Power: 0.2 kW
used
I offer a mercury analyzer for sample analysis: - liquid (tin chloride reduction method), - solids (thermal method). Detection method: non-dispersive, double-beam atomic absorption system with generation of cold mercury vapor. Detection limit: 0.002ng Measuring range: 0 - 1000ng.
used
x-travel: 13500 mm y-travel: 6500 mm z-travel: 1500 mm w-axis: 6000 mm table-size: 18000 x 4500 mm distance between columns: 5200 mm workpiece weight: 300 t spindle turning speed range: 4 - 600 U/min spindle taper ISO: ISO 60 spindle motor: 62,5 (x2) kW feeds x/y/z -stepless: 1- 10000 / 3000 mm/min Control: Siemens 840D PL ram diameter: 700 x 700 mm total power requirement: - KVA weight of the machine ca.: - t dimensions of the machine ca.: - m Modernization in 11/2014 - CNC control Siemens 840 D pl - Coolant system - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nippon Freuhauf Company Ltd reefer container, type: JAR45OA-A, serial number: JE935978, year of construction: 11/1993, with Carrier Transicold Thinline compressor, refrigerant: R 134A.
used
Nippon Freuhauf Company Ltd reefer container, type: KAR9-40CTBX, serial number: KB15396, year of construction: FEB 1995, with Carrier Transicold Thinline compressor, refrigerant: R 134A.
used
Nippon Freuhauf Company Ltd reefer container, type: JA-R450A-A, serial number: JE93-5975, , year of construction: 11/1993, with Carrier Transicold Thinline compressor, refrigerant: R 134A.
used
Nippon Freuhauf Company Ltd reefer container, type: JA-R45CA-A, serial number: JE936461, year of construction: 12/1993, with Carrier Transicold Thinline compressor, refrigerant: R 134A.
used
AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de
10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price
used
SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.
used
E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.
used
E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.
new
3 Phase brushless servomotor Never used! For all technical data please see pictures
used
Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.
used
Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!
Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM
used
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
used
Attention Clearance Sale!!!! We need space, therefore we offer an price of 0,7 € / kg We have many used electric motors from different sice an manufaktors for sale. Condition of the electric motors is seen on the pictures. We sell this units only to dealers for export without warranty.
used
E-motor, 220 kW, 745 RPM
used
Drum motors for conveyor belt drives according to the list in photo The motors are in good condition, ready for operation Flat rate for all engines EUR 3800.00 Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1
used
N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1