We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used
used
Rated power: 50-125kVA, throat depth: 350-750mm, arm distance: 240-500mm.
used
Electrode force: 900daN, nominal power: 80kVA, without accessories.
used
Electrode force: 900daN, length: 1500mm, width: 1200mm, height: 1800mm, weight: 720kg, on-site inspection is possible, with refrigeration unit, tools and documentation, has been regularly serviced.
used
Manufacturer NIMAK Model ZT 22/1 Year Condition used Power 22 kwa Kuhl w. Q 4 L/MIN MACHINE IS INCLUDED WITH RAILS TRAWERSES AND BALANCER
used
Rated power at 50%ED: 22kVA Short circuit current: 14.1kA Electrode force: 345daN Projection: 320mm --- Welding control: accent T-1060/8 (6-times, 8-program) --- Incl. additional options: - Electrode arms 320mm projection top + bottom straight, cone A2/1:10=12 - Spring tension - 10m connection hose package control/pliers - Welding control -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
TIG welder NIMAK Type GS 200 W Fabr. No. 26642 Year of construction approx. 1983 Power 200 Amp. = 60% ED 150 Amp. = 100% ED Adjustment range of power infinitely variable Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet - HF ignition - infinitely variable current control and current rise - connection for electrode welding- only direct current - water-cooled- shielding gas pressure reducer Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg good condition; used
used
Tested welding guns
used
TIG welding machine -Nimak electrode device -Dalex converter -Hose package -Ground cable
used
There are 5 welding machines available, some of which are defective. 1) EWM WEGA 400 MIG DW, defective: unknown. 2) MAHE c-MIG 5000 WWK, partially functional, ignition problems. 3) MAGE c-MIG 5000 WWK. 4) MAHE c-MIG 5000 WWK, defective: Error in display. 5) NIMAK CMK 400, all welding machines including water cooling, intermediate hose package and wire feed case. The welding machines are only sold as a package. Individual machines cannot be sold separately.
used
Ladies and gentlemen, We have following oil transformers in stock from years 2006 to 2015 in top condition. SERVICES: 100KVA to 3500KVA VOLTAGE: 6KV to 33 KV to 400 V or 690 V 1000 kva 20/0.4 KV 1250 kva 20/0.4 KV 1600 kva 20/0.4 KV 2000 kva 20/0.4 KV 2300 kva 12/0.4 KV 2300 kva 20/0.4 KV 2500 kva 15/0.4 also 20/0,4KV 22KV 3500 kva 30/0.4 KV 3500 kva 20/0.4 KV Other sizes and voltages also available from 100 KVA kva up to 3,500. All transformers are in mint condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery inclusive. Any further questions can be reached Mon to sat 8 am to 10 pm.
new
DALEX 50Hz AC welding transformer 160kVA Rated Power: 160kVA/50%ED Voltage Prim.: 400V50Hz Voltage sec.: 6.25 to 9.75V in 4 steps Weight: 223kg
used
DALEX 50Hz AC welding transformer 100kVA Rated Power: 100kVA/50%ED Voltage Prim.: 380V50Hz Voltage sec.: 8.2V Weight: 165kg
used
Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
New ESAB Miggiytrac 1001 electr. Welding chassis Speed: 0.5 - 1.2m/min as new/unused (may show signs of storage) in OVP These are unused goods in their original packaging, which can only show signs of storage. This and further details can be found in the photos. Price excl. VAT (#7717).
used
Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...
used
Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe&nb ...
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg