used NEW HOLLAND Excavators mobile

TÜV: 7/2025 Tires: 540/65 R30 and 650/65 R42 Engine stage Tier 4b – 260 hp

Description: Serial number: HACT6155VKEG03584 ENGINE 6 cylinders 123 HP 6728cc Fuel tank capacity: 230 liters ADblue tank capacity: 39.5 liters Maximum speed 40 km/h Hydraulic clutch Electro-hydraulic inverter Hours according to the counter: 6360 Ownership change costs will be paid by the buyer IMPORTANT: Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities) Approx. Onsite Dimension. (l x w x h): 4,510 x 2,340 x 2,150 mm, weight approx.: 6,500 kg

2900 h, Austrian registration, 40km/h gearbox, max. power at 2200 rpm 88kW, max. Load capacity 3300kg, max. lifting height 9.6m, hyd. Quick coupler, 3rd control circuit, 4x4x4 four-wheel drive & four-wheel steering,, with pallet fork & shovel

I have no information about the year of production. However, the incubator may have never been used. It is clean inside and out. Controls and calibrations have been made. There is no problem.

Ultra freezer, freezer, freezer used Manufacturer: NEW BRUNSWICK Type: U725 -86 Model: U9440-0001 Temperature range down to -86 ° Net capacity: 725 l 3 compartments approx. 860 x 420 x 600 mm (WxHxD) Stainless steel lining 230 V Total dimensions: approx. 1100 x 900 x 2100 mm

Used shaking incubator, New Brunswick Scientific Innova 4300, serial no: 20104564, MFG no.: M1193-0002 The New Brunswick Scientific Innova 4300 Large Capacity Incubator Shaker is designed for handling greater quantities of flasks. It easily holds (12) 2 L flasks and accepts flasks up to 6 L. The Innova 4300 shaker incorporates a triple eccentric counterbalanced drive to provide horizontal plane rotary motion in a 1 in. (25.4 mm) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 25-500 RPM. It also provides temperature control over a range of 5°C above ambient to 60°C. The internal chamber is 34¾ inches (88.3 cm) wide, 22¼ inches (56.6 cm) deep, 19¼ inches (48.9 cm) above the platform and will accept flasks up to 6 liters. It is equipped with a foot-pedal lid lift. The shaker may be opera ...

Specifications (manufacturer): -Manufacturer: Multimatic iLSA Germany GmbH & co. KG -with armrest bracket -with JUN-AIR compressor -TURN DW 300 electronic

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

* General * SKU420U1321 * LocationBarneveld * MakeMondomix * TypeA05 * No.1283 * Pressure * Working pressure8 Bar * Main Features * MaterialStainless steel * Motor1.1 KW * Rotor80 mm * Specified Features - Foam mixer * MaterialStainless steel 1.4301 (304) * Foam mixercheck * Rotor/Stator with pinscheck * Rotor sizesdia. 80x125 mm * Inlet365x310 mm * Outletdia. 19 mm * Motor± 1,1 kW * With frequency controllercheck * With pumpcheck * With Lobe pumpcheck * Motorcheck * Information * Mounted on wheelscheck * Floorspace1,60x0,55 m * Total height1,60 m * Weight200 kgFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

* General * SKU305U617 * LocationBarneveld * MakeDVA Holland-Merten * TypeMerto-Fil 1,1 m² * Mach.No.1032 * Pressure * Working pressure6 Bar * Vacuum possiblecheck * Working pressure jacket3 Bar * Main Features * MaterialStainless steel * Motor11 KW * Surface1.1 m2 * Specified Features - Nutsche filter * Nutsche filter/dryercheck * Filter surface1,1 m² * Capacitybruto 1150 ltr. (netto 800 ltr.) * Vessel sizesDia. 1200x900 mm * Plate sizesDia. 1200 mm * Top connectionsDN50 * Solids outletDN250 * Liquid outletDN50 * With jacketcheck (42 Ltr.) * Max. temperature-10/160 ºC * With stirrercheck * Motor11 kW, 400/690 Volt, 1400 rpm * Stirrer speed3-18 rpm * Cake thickness320 mm * Cake capacity340 Ltr. * Stirrer can be liftedcheck * With hydraulic unitcheck * MaterialStainless steel 1.4571 (316Ti) * Information * Year of construction2005 * Mounted on legscheck * With switchgearcheck (as is) * ...

* General * SKU097A495 * LocationBarneveld * MakeMondomix B.V. * TypeE-50 * No.P-13705 / 30432 * Year of construction2002 * Pressure * Working pressure10 Bar * Main Features * MaterialStainless steel * Motor15 KW * Rotor260 mm * Specified Features - Foam mixer * Foam mixerContinuous aerating system (1x) * Rotor/Stator with pinscheck * Rotor sizesdia. 260x275mm * With jacket(both mixing head and housing) * Motor15,0 KW, 380/415 Volt * With frequency controllercheck * Rotor speed± 88-438 Rpm * Capacity± 750-3000 KG/Hr * With pumptype 2NLU40 (main pump) * Motor2,2 KW, 400 Volt * Speed± 20-204 Rpm * MaterialStainless steel * Information * Floorspace3,1x2,8 M * Total height2,3 M * Weight2100 kgFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

* General * SKU317S552 * LocationBarneveld * MakeHaas Mondomix B.V. (NL) * TypeA-05 * No.P13920 * Year of construction2003 * Pressure * Working pressure10 Bar * Main Features * MaterialStainless steel * Motor1.5 KW * Rotor80 mm * Specified Features - Foam mixer * Foam mixercheck * Rotor/Stator with pinscheck * Rotor sizesdia. 80x100mm * Inletdia. 15mm * Outletdia. 15mm * With jacketcheck * Motor1,5 kW 220-240/380-420 volt * With frequency controllercheck * Rotor speed700 rpm * With Monopumpcheck * Motor0.37 kW 230/400 Volt * With frequency controllercheck * Speed176 rpm * MaterialStainless steel 1.4404 (316L) * Information * With switchcheck * Weight150 Kg * CEcheck * Floorspace1,1x0,3 M * Total height0,8 MFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Read ...

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

Press brake with servo-electric drive Safan Holland type SMK-40-2050 -TS1, rb. 1995. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2050 mm; Uniquely large stroke: 275 mm; Between columns: 2150 mm; Pressure: 40 t CNC control TS1 -simulation of 2 D, Polish - controlled axes Y1; Y2; Y3 - (CNC controlled lower table ); X -10 point table deflection arrow compensation. Drive; 9 kW; dimensions: 3000x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a stand instruction BiHP in Polish. For the machine we offer a comprehensive service.

Friesuse Kiremko BV from French fries Production, Completely built of stainless steel, Fully automatic deep fryer oven, With integrated heat exchanger, Is heated with Thermooel Indirectly, L: 8500 mm. -Kiremko Kiremko BV Fryer, Completely built in stainless steel, Fully automatic fryer continuous furnace, with an integrated heat exchanger, Is with Thermo-oil indirectly heated, L: 8500 mm

Holland Food Machinery sieve drum, order number: 950292, year of construction: 1995, perforations: Ø 1 mm, clearance: Ø 160 mm, total dimensions: 2480 mm x 1000 mm x 1460 mm.

Description: Unused Laying on: 12 pallets In various sizes including  ,250x250x200 mm, 250x250x250 mm, 150x150x150 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 2,400 x 2,000 mm, weight approx.: 500 kg

Liebherr handling excavator in top condition with HD suspension, balloon tires, gelaendefaehig! Type 932 Litronic HD HD chassis Weight approx. 37,000kg Built in 2001 magnetic system, automatic levelling at discontinuation, boom 7m, stem 5m, Preheater for motor oil and hydraulic oil. Strong lifting force, e.g. mobile without settling over 10,000kg. technically very good condition. optional accessory (available at an additional cost): G3pdl8ila Quick-change system Shovel for earth movement Magnet or swivel magnet Gripper for scrap Clamp for round material such as baeums or pipes Transport mass: Width 3,000mm Length without sti-steal6,000mm Transport height 3,560mm Former new price approx. 890.000.-DM Special price

Industrial wheeled excavators

Wheeled excavator Weyhausen KG, 2870 Delmenhorst Ab. Total weight: 16,000 kg Ab. Axle load: 10,000 kg

Koparka KOMATSU PW95 nr 21D0220312, rok 2005, 13522 h

Excavator includes banana shovel and ditch cleaning bucket. It also has a joint on the front excavator arm to rotate the bucket separately from the arm.

Chain excavator Liebherr R941B with sheet wall ram Technically fine Built in 1977