used NETSTAL Injection molding machines

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal E-Jet for sale. Machine is functional. Year of construction 2004 Spray force 113 kN Clamping force 500 kN Opening distance 50 mm Tool installation height 195mm-515mm Degree of protection 54 IP Machine weight 4400 kG Detailed information and condition of the machine > see attached pictures If you have any further questions, please do not hesitate to contact us.

B&A REF: 8945 TON: 450 SHOT WEIGHT: 916 SCREW DIAMETER: 70MM STROKE VOLUME: 954CM3 INJECTION PRESSURE: 2144AR PLATEN SIZES: 1150 X 1185MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 800MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 250MM CONTROLS: DPS CORE PULLING: 2 AIR VALVES: 3 MOTOR: 75 HEATING CAPACITY: 43KW ROBOT INTERFACE: STAR UXE 1000 SCREW DRIVE: ELECTRIC

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

PET-LINE 60N/95 complete system for preforms PCO consisting of: 1. PET Injection system Netstal PET 2000-3700 R 2. 60 cavity injection mould Otto Hofstetter AG (27 gr) 3. 60 cavity injection mould Otto Hofstetter AG (30,5 gr) 4. Dryer Piovan 560 kg/h 5. Air dehumidifier RPA 1200, 1200 m3/h 6. Compressor Aircenter SM 12, 60 m3 7. Water chilling unit Chiller CA1921MT 8. Water chilling unit Chiller CA0621MT Manufacturer: Otto Hofstetter AG Year of production: 2012 Installed power: 462 kW. Working hours: 7285 h

Offer: Netstal Synergy 3500/1700 Robot IML SM700/TM200 High Speed bj./year 2009/10

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

INJECTION UNIT Screw diameter: 80 mm Calculated injection volume: 1608 cm³ Pressure on the material: 2304 bars CLOSURE UNIT Closing force: 5000 kN Opening travel: 0-860 mm Mini/Max Mold Thickness: 750-1250 mm Passage between columns: 920 x 920 mm

Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Screw diameter: 35mm, max. opening path: 350mm, length: 5017mm, width: 1565mm, height: 2156mm, weight: 6t, operational hours counter: 124,862h, with hydraulic core pull, 2x air valve DS, hydraulic valve gate and documentation.

Preform Weight (Max): 30,5 g // Neck Type: PCO

The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm

Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (*=standard) mm M12-M16* Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes

Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination