nt used for sale

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

2 NTE side labelling machines: Serial numbers: PHARMA 02 & PHARMA 03 Year of production: 2004 Both labelling machines are fitted with Leuze Electronic reject systems. Label height: 110mm Conveyor width: 180mm Condition: good Dimensions: 850mm x 1.350mm & 1.050mm (LxW&H)Price per machine: 2.500 EUR Price combined: 4.500 EUR

Stainless sanitiser with plastic intralox belt, belt dimensions 2450mm x 700mm, max product height 500mm, with recirculation tank and pump, 3Ph

Type: TMC-4V X-axis: 570 mm Y-axis: 420 mm Z-axis: 460 mm Table dimensions: 740 x 750 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 5,5 kW Control : Fanuc Toolchanger: yes Number of toolholders: 20 positions Number of rotations: 6000 rpm

2-hole flange bearing -Type: M-UCT205JD1 -Price: per piece -Number: 8x available -Weight: 0.9 kg/piece

New Work Machine Cabin Manufacturer: NTcab External dimensions: 130x140x170cm LxWxH Curb weight: 1016 kg The cabin is therefore new and very versatilely equipped.

Plummer Block Housings, Plummer Block Housings -Number: 4 pieces bearing block with bearing -Type bearing block: NTN 320 -Type of bearing: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x bearings available -Price: per piece -Dimensions package: 550/340/H240 mm -Weight: 43 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: NTN -Thread: diameter 32 mm -Pitch: approx. 10 mm -Thread length: 482 mm -Techn. Drawing: see photos -Dimensions: 672/93/H93 mm -Weight: 9 kg

Günther vacuum tumbler, type: GPB 1200 K TS 2, machine number: 26656, year of construction: 2001, 400 V, 20 A, 3.5 kW, volume: 1200 liter, dimensions: 2200 mm x 1100 mm x 1850 mm. Without vacuum pump.

Pneumatic piston vibrator, vibrator, external vibrator, with additional vibration mass NICE VIBRATION NTK 25 AL working torque ( without additional vibration mass ): 1,,18 - 1.24 cmkg frequency ( without additional vibration mass ): 1289 - 1986 1/min Operating pressure: 2 - 6 bar Air consumption ( without additional vibration mass ): 34 - 149 l/min Compressed air connection: 1/4 ( inch ) Additional vibration mass: SM 25 - 1 diameter: Ø 50 mm, height: 20 mm, bore: Ø 16.5 mm New ! with documents ! Dimensions ( vibrator ): 150 x 50 x 55 mm Dimensions ( packaging ): 170 x 70 x 60 mm

very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training

BRAND NEW - CUMMINS NTA 855 M350

; Mileage [km]: 6; Power [PS]: 380

NTS 200 Wet grinder Grinding wheel diameter 200 mm Grinding wheel width 40 mm Honing diameter 220 mm Honing wheel width 30 mm Speed 120 min¯ ¹ Power drive motor 0,12 kW Power output drive motor 0.06 kW Supply voltage 230 V 50 Hz Motor speed 1400 348 mm, width / depth length 285 mm, height 275 mm Length max 460 mm, width / depth 380 mm, height 435 mm Weight 9.2 kg G & pieces 5750200 Option: Stand with door

NTS 255 Wet grinder Grinding wheel diameter 250 mm Grinding wheel width 50 mm Honing diameter 200 mm Honing wheel width 30 mm Speed 90 min¯ ¹ Power drive motor 0.2 kW Power output drive motor 0,12 kW Supply voltage 230 V 50 Hz Motor speed 1400 Length 380 mm, width / depth 370 mm, height 420 mm Length max 440 mm, width / depth 400 mm, height 490 mm Weight 17 kg G & pieces 5750255 Option: Subframe

Plate heat exchangers GEA NT150L B-10, 1491 kg, 356 l press content, year 2009, very good condition, max. 13 bar,.

MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading.

Power rotor diameter: 25mm, Design generation : 3, RPM : 3600 max, Max. inlet.: 7 bar, Power: 0.3-1.1 Flow: 10-30.4 L/min, Max. Discharge pressure: 16 bar BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

CNC multi-tasking lathe NAKAMURA SUPER NTX-S Reference No.: 18038 Mfg. year 2007 S/No. V300901 FANUC 16i-TB Luckbei-dialog system supercap Maximum turning diameter -Upper turret 390 mm -Lower turret 300 mm Maximum turning length 1,100 mm Max cash working capacity 65 mm Milling spindle AC 18.5/11 kW Milling spindle maximum speed 12,000 rpm Capto C6 Servo controlled B-axis, 230° Y-axis 160 mm ATC with 40 tools Main and sub spindle AC 22/18.5 kW Main and sub spindle maximum speed 4.500 rpm 12/24-station turret, all stations for driven tools Maximum speed of driven tools 3,600 rpm 2 off. 3-jawchuck 210 mm, SCHUNK Coolant tank 250 liters High pressure pumps Swarf conveyor 1 set of toolholders for lower turret -static 9, 3-driven weight 19,000 kg CE-mark

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

335 hp

Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

; Gross weight [kg]: 2800; Engine: Cummins NTA855-G4; Accessories: Battery, Control Panel

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

sheet width: 2050 mm plate thickness: 2,5 mm thickness at Niro-steel: 2,0 mm no. of strokes: 75 Hub/min cutting angle: 2°30 ° engine output: 3,0 kW table height: 810 mm weight of the machine ca.: 2400 kg. range L-W-H: 2600 x 1385 x 1600 mm Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

This NAKAMURA Super NTJ Lathe was manufactured in the year 2006 in Japan. It is equipped with a Fanuc 18 ITB control unit. The machine disposes of a 2 turrets with 6000 rpm drive. The first one has 12 stations and the second has B axis. Contact us anytime for further questions.

This DMG NTX1000 Lathe was manufactured in the year 2012 in Germany. It is equipped with an SIEMENS SINUMERIK 840 D control unit and has 5 axis. The machine has a spindle speed of 6000 rpm and a milling spindle speed of 20000 rpm.

This Nakamura Super NTJ100 Lathe was made in 2016. It is equipped with a Fanuc control unit and has 9 axis. The machine has a spindle speed of 6000 rpm.

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

This DMG MORI NTX2000/1500SZ Lathe was manufactured in the year 2016 in Japan and has 9715 production hours, of which 4568 are spindle hours. It is equipped with a DMG MORI ERGOline control unit and has 5 axis. The machine has a spindle speed of 5000 rpm.

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm

Description Termorregulador de agua Temperatura máxima: 90 °C Potencia de calefacción: 9 Kw Potencia de la bomba: 0,75 Kw Caudal de la bomba: 40 L/min

AVAILABLE FOR SALE! 4X USED DIESEL GENEARATORS SET. MAKE: CUMMINS TYPE: NTA-855 G4 POWER RATING: 310 KW STANDBY FUEL: NATURAL DIESEL YEAR:2004 HOURS: 9.000 TO 10.000 ALTERNATOR: STAMFORD,380V, 50HZ, 1500 RPM EXCELLENT CONDITION. SCOPE OF DELIVERY: 4X COMPLETE GENSET WITH ALTERNATOR 4X SILENCER

Table size approx. 1250 x 600 mm.

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.

X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible.

Circuit board thickness: 0.6-1.6mm, weight: 245kg.

Connected load: 250VA, weight: 275kg.

AVAILABLE FOR SALE! USED DIESEL GENEARATORS SET. MAKE: CUMMINS TYPE: NTA-855 G4 POWER RATING: 312 KW STANDBY FUEL: NATURAL DIESEL YEAR:2003 HOURS: 10.700 ALTERNATOR: STAMFORD,230/400V, 50HZ, 1500 RPM EXCELLENT CONDITION. SCOPE OF DELIVERY: COMPLETE GENSET WITH ALTERNATOR SILENCER

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Live tools on all turrets (12 positions each turret) Y axis on all turrets High pressure system with cartridge filter - max 18 bar, swarf conveyeor TECNOFORME Auto shut off Bar loader interface Type G pick-up arm for sub-spindle including conveyor belt for finished parts External cleaning blow for spindle and counter spindle Internal cleaning jet with coolant for counter spindle Polygoning Monitoring of cutting forces and tool life Navigator system for fast search of the piece zero, work clamping, N° 1 collet chuck Hainbuch SPANNTOP ASA 8 GR. 80mm - main spindle, N° 1 collet chuck Hainbuch Axfix ASA 6 GR. 80mm - couter spindle, tool holders, Set of tool holders Marchetti consists of:, N° 1 cut-off tool holder with coolant supply, N° 2 boring bar holder 40mm internal coolant supply, N° 4 boring bar holder 32mm internal coolant supply, N° 2 duple toolholder for tool shaft  ...

Connected load: 250kVA, weight: 285kg.