used NB Manual Spindle Presses

Manufacturer: Simovert P 6SE2105-3AA01  , Type: 6SE2105-3AA01  , Serial number: XA 9411 2 BE 163,

pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radio remote control with charger NBB SL 48-2 / MOL ( SL482MOL) Frequency: 433.375 HF: SM 430 5 Functions Charger: LAD 0470 ( LAD0470 ) Primary: 230 V 1AC 50 Hz, 20 VA Secondary: 9.6 V DC, 600 mA used, tested ! Dimensions ( radio remote control ): 280 x 145 x 165 mm Dimensions ( charger ): 180 x 90 x 160 mm

Documentation doc-Gericke-Nibbler.pdf Description Mill for the size reduction and recycling of agglomerates, lumps and granules in mass. Manufacturer: Gericke Model: NBS 300/450 Year: 1999 Choice of granulometry: Grid or wire mesh Operating principle: Rotor with 4 blades. cutting effect on the product with the screen. Inlet section: 300 x 350 mm. Power: 3,7 KW Max capacity : 12.000 L/H (depending on product and output size). Materials: stainless steel. Mounted on a mobile frame.

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: NBB, crane control radio remote control, without charger -Type: SL 48-2/MOV -Total dimensions: 200/130/H165 mm -Weight: 1.5 kg

Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Key data: 40 t

Specifications: Compressive force 40 tons max. achievable compressive force 50 tons Table size W x D approx. 650 x 550 mm Passage between uprights 650 mm Diarrhea hole 150 mm Plunger 580 x 250 mm

Hand screw press - type "NEHER" -Good used condition Dimensions: LxWxH 1.4x1.2x2.3Meter Weight 850Kg Wckq0zxa

Key data: 8 t, 420 mm, 120 mm

Machine Type: Hand Spindle Press Manufacturer: SCHULER Condition: good Offer Type: Used Machine Specifications: Compressive force: 8 t Projection: 120 mm Table: 420 x 235 mm Installation height: 175 mm Weight: 250 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Key data: 20 t

Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request

Key data: 20 t, 420 mm

Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Two-pillar Manual Spindle Press Hiller & Lutz HILU HP 70 manufacturer: Hiller & Lutz type: HILU HP 70 mach.-Nr.: 1047 year of construction: ??? comm.-Nr.: 3990300/009 stock-nr.: 1885 +++ Regular Price: 2.650,- € > Reduced Price: 1.325,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: ca. 25 t spindle diameter: 70 / 140 mm width between columns: 350 mm max. height between table and plunger: 300 mm spindle hub max.: 220 mm table surface (width x depth): 300 x 300 mm pass-through hole in table: Ø 80 / 120 mm mortise in plunger: Ø 40 mm weight: ca. 550 kg standing area ...

Description: table dimensions approx. 315x215 Approx. Onsite Dimension. (l x w x h): 1,000 x 960 x 2,160 mm, weight approx.: 300 kg

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

offer consist of: - manual device HMU-80 Horizon HMU-80 manual device - compatibel with: Horizon MC-80a / MC-80m / MC-80c; very good

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Type WLG Made in Germany 1981 y.

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Brand: Lisec Type: Manual Frame Machine Model: RSVN-48/25u Serial Number: 322-002861 Construction year: 2000 Weight: 1,15 tons Power: 1,10 kVA Air pressure: 6 bar Machine demention LxWxH mm 4900 x 1500 x 3150 Transport size L x W x H: Bij arrangement Min.-max. glass thickness: Trippel Min. glass size: 1800 Max. glass size: 3500x2500 Condition machine : Good Control type: B&R Electric. Connection: 400+N Missing parts: Unknown Instructions: Available by Lisec Electric diagram: Yes Parts list: Available by Lisec Available software: Yes Photos/film available: Photos and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (23077), Cork pasting machine (23078), Press with gas station (23079, Line scanner (23080) and Turning Station (23124)

Manual static postformer Min/Max. workpiece length 1600 / 3100 mm. Profile height max.150 mm. Workpiece thickness min. 16 mm. Working height 950 mm. DOCUMENTATION AVAILABLE

Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m