We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...
used
Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request
1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...
used
Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request
technical data: - with continuous chain bed and hydraulically clocked pressure rollers - with digitally positioned separator for simultaneous separation of boards and sprices - Slides for the Spreissel are included in the scope of delivery - max. wooden length 2.1 m
technical data: Type: not driven Make: Möhringer Rolls Number: 3 pieces Warehouse: Wiesentheid
technical data: Make: Möhringer Power: 5 kW
technical data: Machines No.: 0115 Drawing No.: 170 317 00
Machines No.: 0052 QFL 0053 Insertion Drawing No.: 146 001 75 1 cross conveyor light with insertion: Power: 0.37 kW Axle distance: 2.06 m Rank: 3 Transport by 3/4" chain and stanhl chain wheels Drive by special gear motor Substructure and bearing housing in steel construction
technical data: Track gauge: 980 mm Support height: 420 mm reinforced execution circulating chain Drive by worm gear motor with built-in slip clutch Kippstool adjustable stem holder Cable and cable balancing
technical data: Make: Möhringer Type: KW 2h Types No:: 126 450 Track gauge: 980 mm Support height: 430 mm electr. Page verst.: yes Feeding: yes Wooden feeder: from the left Drive: 0.37 kW Wheel diameter: 200 mm
technical data: Type: KW 1 vek Types No.: 126 200 Track gauge: 800 mm Support height: 410 mm Wheel diameter: 180 mm With electric side adjustment
technical data: Make: Möhringer Type: for block pull kW: 5 kW Rpm: 34 rpm, 40% ED Shaft diameter motor: 50 mm
technical data: Make: Möhringer Type: Drive set Types No.: 124000 Track gauge: 980 mm Total length: 1430 mm
technical data: Make: Möhringer Type: Drive set Types No.: 124000-1 Track gauge: 980 mm Total length: 1430 mm Power: 2.2 kW
used
- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward
used
Spurt width: 980 mms edition height: 430 mms impulse: 0.37 kW auxiliary carriages in reinforced execution with Kippschaemel and running around role chain for model, with a hydraulic tiltable and adjustable Muldenschaemel for round timber, including cables and cable balance.
Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms
Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.
Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m
used
Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW
Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m
used
Track gauge: 980 mm Support height: 430 mm Drive: 0.37 kW - reinforced design - with tipping stool and circeaching roller chain for model - with a hydr. tilting and movable trough smelter provided with chains
used
Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp
used
Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end