used MULTIVAC Filling equipment

Documentation Multievacuator 140.pdf Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line. Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer fo ...

Multivac double sided labelling machine: Type: MR425 Year of production: 2005 Serial number: 23932/05 2 label dispensers type MR411 attached. One dispensers labels from the top down and the other dispenser labels from the side. It can put labels on up to 200 mm in height. Dimensions: 2.900mm x 1.600mm & 2.100mm (LxWxH) Very high capacity. Condition: good

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Multivac R 530 , built 2007 , film width 460 mm , print 480 mm , hard foil , M+R under-track labeler , 1000 ccm booster pump , Very good condition.

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.

MULTIVAC T-350 for gas packaging Pneumatic system with working pressure: max. 7-10 bar. 4kW. A minimum of 10, a maximum of 30 products can be packed. It is equipped with an intelligent micro-operated control unit that stores various settings for 220V/3PH/60hz operation.

MULTIVAC R-5100 ID.NO. 2126 Multivac R-5100 packaging machine with associated Mr equipment. Gas machine, built-in vacuum pump, 1x punch, Reel for plastic foil, Heatvac plates. Foil width 422 mm, Offset 265 mm, Tools 2.1 225 x 175 mm Max depth 140 mm. Dimensions machine 550 x 90 H 165 cm.

MULTIVAC R-230 ID.NO. 2142 Multivac R-230 thermoformer for hard film with preheater. Elmoprint date unit, Winder for waste plastic, year of production 1999, Foil 322 mm Tools 3x 180 x 85 D 50 mm Max depth machine 100 mm. Very fine condition the machine has previously packed dill & parsley. Dimensions 540 x 95 cm H 200 cm.

Was used for packing syringes, speed: 14 cycle/min, cut-off length Injectomat without/ with cannula/ other: 200/ 255/ 285mm, paper width at 60gr/m²: 415mm, film width 75/75 CPP/ PE: 421mm, blister: 6-lane, length: 6500mm, with Inserter Müller & Kurz, year of manufacture 1991 and Flexographic Printer Amaco DV 131, year of manufacture: 2006.

Nominal power: 19kW, an inspection is possible.

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

Product number: 2397P Weber slicer Type: CCS904 Serial number: 7096 Year of construction: 2007 Capacity: 2000 RPM Slice thickness: 0.5 - 50 mm Compressed air: 10 Bar, 150 L/min. Power: 3 x 400V, 50Hz, 10 kW Dimensions: 13400 x 1900 x 2600 mm Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit Multivac thermoformer Type: R530 Serienummer: 115612 Year of construction: 2007 Film width: 560 mm Index: 1200 mm Dye: 3.5 Power: 3 x 400V, 50Hz, 36.5kW Dimensions: 14850 x 1300 x 2450 mm Hard film machine for vacuum and gas flush Pago labeler Type: System 516 Serial number: 212516068 Year of construction: 2012 Mettler Toledo metaldetector and checkweigher Type: XS3 Serial number: 35000430 Year of construction: 2008 With reject Mettler Toledo X-ray machine Type: Safeline R20 Serial number: 3113R20V3268 Year of construction: 2013 ...

Single-seam sealing Single-seam sealing top/bottom Double-seam sealing Double-seam sealing top/bottom Filling plates Automatic chamber lid mechanism Roller conveyor Stainless steel sloping insert Vacuum filter Liquid separator Suction throttle Machine dimensions W x D x H (with open chamber lid) in mm: 880 x 785 x 1480 Chamber dimensions W x D x H in mm: 650 x 450 x 170/250/330/380 Pump capacity in m3/h: 100/150 Delivery time: 30 working days after advanced payment

Used double chamber vacuum packaging machine Multivac AG800 has two chambers which ensure greater efficiency and is used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 650mm. The internal dimensions of the packing chamber are: 650 mm x 800 mm x 220 mm high. Busch vacuum pump: 100m3. Final pressure: 0.5 mbar Vacuum system: according to the sensor External dimensions of the machine: 1560 mm x 1100 mm x 1150 mm. Dimensions of sealing bar: 650 mm x 4. Weight: 275 kg.

Multivac A300 Vacuum packer Serial: 6818 2004, stainless vac packer, 450mm sealing bar, 2.7Kw, mobile, 3Ph

Multivac vacuum chamber packaging machine (inline) Manufacturer: Multivac Type: B500 Year of construction: 2007 Speed: 2.5 cycles/min Microprocessor control Collection of sections Conveyor belt width: 750 mm Power: 7.2 kW Working principle: continuous (inline) high-speed vacuum packaging machine Products: cheese, meat and other bulky products

Multivac R 570 , film width 470 mm , discharge 320 mm , Darfresh , under and upper web labeller.

Multivac T200 traysealer, New condition!, - 2 moulds available (dimensions in photos), - Trays available, - Busch pump build in, - Pump only has 60 production hours, - Spare parts included, - Manuals included, -

Multivac T200 Tray sealer Serial: 125 Stainless, currently set to seal a 285mm x 175mm tray, mobile, 3Ph

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.