british flag
Resale Logo

Mori Seiki used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information suppliers and buyers of high quality used processing and packaging machinery  Lex Machinery Sales Ltd  http://www.lexmachinery.co.uk 
banner logo
start page > keywords Mori Seiki > results
382 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122226790 102

MORI SEIKI SL-154SY for sale
CNC Turning Machines


Producer: MORI SEIKI Type: SL-154SY Serial-Nr.: SL150CC2016 YOM: 2003 used Swing-Ø over Bed: 680 mm Swing-Ø over Cross Slide: 510 mm Max. Distance between the Spindle Noses: 750 mm Max. Turning-Ø: 300 mm Stan ...
used machine
 
Producer: MORI SEIKI
Type: SL-154SY
Serial-Nr.: SL150CC2016
YOM: 2003 used
Swing-Ø over Bed: 680 mm
Swing-Ø over Cross Slide: 510 mm
Max. Distance between the Spindle Noses: 750 mm
Max. Turning-Ø: 300 mm
Standard Turning-Ø: 170 mm
Max. Turning Length: 350 mm
Max. Bar Capacity: 45 mm
X-Travel: 215 mm
Y-Travel: 70 mm
Z-Travel: 490 mm
Travel of Spindle 2 (ZS-Axis): 520 mm
Max. Spindle Speed (Spindle 1): 60 - 6.000 r/min
Max. Spindle Speed (Spindle 2): 60 - 6.000 r/min
Number of Tools in Turret: 12 driven Tools
Speed for driven Tools: 3.000 r/min

Feed Rapid Traverse Rate X-, Y-, Z-, ZS-Axis:
X: 18.000 mm/min
Y: 6.000 mm/min
Z, ZS: 24.000 mm/min

Nominal Power: 45 kVA
Measurements: (LxWxH): ca. 2.320 x 1.873 x 2.020 mm
Weight: ca. 4.300 kg


Additional information:

• Chip Conveyor
• Parts Removal
• Foot Pedals
• Coolant Pump with Tub
• Extraction System
• Tool-Measuring Arm


2003
Price  
    request
122224672 808

KOMORI LS840P for sale


KOMORI LS840P (72 x 102cm), Age c.2005, serial no.117, circa 148 million, PQC, PDC-S2 (with Spectrophotometer), Komorimatics, AMR (automatic make ready), Non-stop feeder and delivery, APC, All cylinders chromed, Ionised  ...
used machine
 
KOMORI LS840P (72 x 102cm), Age c.2005, serial no.117, circa 148 million, PQC, PDC-S2 (with Spectrophotometer), Komorimatics, AMR (automatic make ready), Non-stop feeder and delivery, APC, All cylinders chromed, Ionised blast in feeder, Machine by raised 30cm, KMS4, Anti-static in feeder, Alcosmart, Automatic blanket/roller + imp cyl wash up, Technotrans Beta C Combined Refig/Ink Temp Control, Grafix Digitronic 3000 Powder Spray
2005
Price  
  BE   request
122224610 102

MORI SEIKI SL-15M for sale
CNC Lathe


X-travel: 220mm, z-travel: 560mm, rotational speed: 5000/min max., number of tool slots: 12, pindle passage: 42mm, chuck diameter: 160mm, quill stock diameter: 75mm, spindle bore: 52mm, length: 2500mm, width: 1400mm, hei ...
used machine
 
X-travel: 220mm, z-travel: 560mm, rotational speed: 5000/min max., number of tool slots: 12, pindle passage: 42mm, chuck diameter: 160mm, quill stock diameter: 75mm, spindle bore: 52mm, length: 2500mm, width: 1400mm, height: 1900mm, weight: 3.3t.
1986
Price  
  DE   request
122196847 101

MORI SEIKI TV - 30 for sale
Vertical Numerically Controlled Machining Centres


VERTICAL MACHINING CENTER MORI SEIKI TV - 30 - 07-09-107 Shipping time: immediately Number: 07-09-107 Manufacturer: Mori Seiki Type: TV - 30 MACHINE DATA Construction year: CA 1996 L x W x h: approx. 2000  ...
used machine
 
VERTICAL MACHINING CENTER MORI SEIKI TV - 30 - 07-09-107

Shipping time: immediately

Number: 07-09-107

Manufacturer: Mori Seiki
Type: TV - 30

MACHINE DATA
Construction year: CA 1996
L x W x h: approx. 2000 x 2000 x 2500 mm
Weight: approx. 2000 kg

Very good condition

TECHNICAL DATA
Control: Mori Seiki MSC - 802 M

Procedures:
X - axis: approx. 420 mm
Y - axis: approx. 300 mm
Z - axis: approx. 250 mm
Table size: approx. 700 x 400 mm

Spindle:
Speed range: approx. 1-8000 RPM
Toolholder: BT 30
Power: approx. 4,0 kW

Feeds & express ducts:
Feed range: approx. 1-15000 mm / min
Speed: 36 m / min

Tool changers: Star revolver
Number of tool stations: 10 units
Chip to chip - time: approx. 4.0 seconds

ACCESSORIES
â?¢ Full protection - Panel
â?¢ Coolant system
â?¢ Electronic hand wheel
â?¢ RS 232 data interface
â?¢ Central lubrication
â?¢ Complete machine documentation
â?¢ Various tool holders

Other accessories on request
Price and other specifications on request
1996
Price  
    request
122168739 101

MORI SEIKI DMG SV 503 for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI SV 503. 1105-02351 category machining center - vertical make MORI SEIKI type SV 503 year 2002 State second-hand machine control CNC Mori Seiki MSC - 502 Fanuc storage France country ...
used machine
 
Machining center - vertical MORI SEIKI SV 503. 1105-02351 category machining center - vertical make MORI SEIKI type SV 503 year 2002 State second-hand machine control CNC Mori Seiki MSC - 502 Fanuc storage France country of origin Japan delivery after agreement cargo base EX WORK

Technical details x way 1020 mm y way 510 mm z-way 510 mm control Mori Seiki MSC - 502 Fanuc table aufspannen surface 1320 X 600 mm speed range 12000 RPM tool holder BT 40 power - Milling spindle of 22/18.5 kW tool changer - places: 30 stations too ugwechselzeit 1 sec feed range 1-30000 mm / min rapid traverse - longitudinal/transverse/vertical 32 m/min overall power requirements 47 kW machine weight 5200 kg space requirement approx. 2,200 x 2500 x 2700 mm accessories complete machine documentation coolant system description BT 4 0 HOLDER SUPER CONDITION
SPAENEFOERDERER SPINDLE 12000 RPM
TRAVEL 1020 X 510 X 510
WITH 4/5 AXIS DIVIDING HEAD NIKKEN
2002
42,000 €  
    request
122168615 101

MORI SEIKI NV 5000 A for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI NV 5000 A / 40 - no. 1105-02350 category machining center - vertical make MORI SEIKI type NV 5000 A / 40 year 2006 condition second-hand machine control CNC FANUC MSG 501 storage Fr ...
used machine
 
Machining center - vertical MORI SEIKI NV 5000 A / 40 - no. 1105-02350 category machining center - vertical make MORI SEIKI type NV 5000 A / 40 year 2006 condition second-hand machine control CNC FANUC MSG 501 storage France country of origin Japan
Delivery time on request based on cargo from the site technical details x way 800 mm y way 510 mm z-way 510 mm control FANUC MSG 501 speed 20,000 rpm 30 tool changer table size 1100 x 600 mm drive 18.5/11 kW tool holder BT 40 Getriebestu fen 1 spindle diameter in the vord. Bearings 65 mm table load 1000 kg T-grooves 6 x 18 x 100 mm distance spindle / table 150-660 mm tool diameter 80 mm max Werkzeugdurch. free neighboring box. 125 mm of maximum tool weight 8.0 kg change time tool - tool 1.0 seconds change time span - span approximately 2.6 sec rapid 42 m / min feed rate 1-6000 mm / min total power consumption 48 kVA machine weight approx. 7.3 t space requirement of approx. 3, 5 x 3, 5 x 2, 7 m accessories Spänefö rderer documentation spindle radiator coolant system zero-point clamping system light toolholders description with NIKKEN 4/5 axis dividing head

2006
71,000 €  
    request
122168613 101

MORI SEKI SV 50 for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI SV 50 Nr. 1105-000802 category machining center - vertical make MORI SEIKI type SV 50 built in 1996 State second-hand machine control CNC MSC-518 8 storage location of the down's co ...
used machine
 
Machining center - vertical MORI SEIKI SV 50 Nr. 1105-000802 category machining center - vertical make MORI SEIKI type SV 50 built in 1996 State second-hand machine control CNC MSC-518 8 storage location of the down's country of origin Japan s ince immediately cargo base from site technical details x way 800 mm y way 510 mm z-way 510 mm control MSC-518 8 table size 1100 x 600 mm speed range 12000 RPM tool holder SK 40 - Milling spindle 22 kW tool changer - stations: 30 Stations tool change time 1 sec feed range 1-16 m / min rapid traverse 32 min high pressure pump Knoll, 70 bar total power 32 kW machine weight approx. 6.8 t space requirement of approx. 2, 4 x 2, 6 x 2, 850 m accessories chip conveyor description with 2 SPAENEFOERDERER
CNC MORY MSC 518 fanuc 18 M
WITH 4 + 5 NIKKEN TEIAPPARAT
GOOD CONDITION
1996
27,000 €  
    request
122168611 101

MORI SEIKI DMG SV 400 for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI SV 400. 1105-00959 category machining center - vertical make MORI SEIKI type SV 400 year 1998 State second-hand machine control CNC Mori Seiki MSC - 518 MA Fanuc storage France coun ...
used machine
 
Machining center - vertical MORI SEIKI SV 400. 1105-00959 category machining center - vertical make MORI SEIKI type SV 400 year 1998 State second-hand machine control CNC Mori Seiki MSC - 518 MA Fanuc storage France country of origin Japan delivery after agreement cargo base EX WORK

Technical details x way 600 mm y route 430 mm z-way 460 mm control Mori Seiki MSC - 518 MA Fanuc table aufspannen area 900 x 500 mm speed range 12000 RPM tool holder BT 40 power - Milling spindle of 22/18.5 kW tool changer - places: 30 stations we rkzeugwechselzeit 1 sec feed range 1-30000 mm / min rapid traverse - longitudinal/transverse/vertical 32 m/min overall power requirements 47 kW machine weight 5200 kg space requirement approx. 2,200 x 2500 x 2700 mm accessories complete machine documentation coolant system description
BT 40 HOLDER SUPER CONDITION
SPAENEFOERDERER SPINDLE 12000 RPM
TRAVEL 600 X 430 X 460
1998
23,000 €  
    request
122069966 1300  

YONEMORI IRON WORKS CO. 300-3500 MM L - 0.3-2.3 MM TH. for sale
CUT-TO-LENGTH LINE


Qty. 1 Second-hand cut-to-length line including 6-Hi leveler – Shear line Mfc.: Yonemori Ironworks Co. Built: 1991 Type: Material: Cold rolled mild steel & surface treated steel strip Voltage: AC 220 V, 60 Hz W ...
used machine
 
Qty. 1 Second-hand cut-to-length line including 6-Hi leveler – Shear line
Mfc.: Yonemori Ironworks Co. Built: 1991 Type:
Material: Cold rolled mild steel & surface treated steel strip Voltage: AC 220 V, 60 Hz
Width: 300 – 1600 mm Thickness: 0.3 – 2.3 mm
Coil OD: 1600 mm ID: 508 mm Coil weight: 15.0 T
Cut length: 300 – 3500 mm Line speed: 80 m/min.
Cut accuracy: +/- 0.3 mm Line direction: from right to left seen from operation side
Scope of supply Coil skid Entry coil car Uncoiler Opener
Deflecting roll Hydraulic shear Heavy line leveller Loop unit
Side guide Light 6-Hi line leveller Feeder unit
DDS-R shear unit
Inspection conveyor Reject conveyor with a reject truck
No. 1 prime piler with a taking out conveyor Over pass conveyor
No. 2 prime piler with a taking out conveyor Hydraulic device
Pneumatic device Electric control device
1991
Price  
  DE   request
121971412 1200

KOMATSU 1 for sale
Automotive Crankshaft Processing line


Automotive Crankshaft Processing line (MAKES ARE ALL JAPANESE) 1.NC Cylindrical Grinder(Komatsu, 2006) 2.NC Cylindrical Grinder(Komatsu, 2006) 3.NC Cylindrical Grinder(Komatsu, 2006) 4.NC Cylindrical Grin ...
used machine
 
Automotive Crankshaft Processing line
(MAKES ARE ALL JAPANESE)

1.NC Cylindrical Grinder(Komatsu, 2006)
2.NC Cylindrical Grinder(Komatsu, 2006)
3.NC Cylindrical Grinder(Komatsu, 2006)
4.NC Cylindrical Grinder(Komatsu ,2006)
5.NC Pin Measuring Instrument(Komatsu ,2006)
6.Processing machine(Samoniks,2006)
7.NC Lathe(Moriseiki, 2006)
8.NC Lathe(Moriseiki, 2006)
9.NC Lathe(Moriseiki, 2006)
10.Combination Lathe(Horibu,2006)
11.Combination Lathe(Horibu,2006)
12.Pin Lathe((Horibu,2006)
13.Transfer Loader 1(Fuji Electric,2006)
14.Transfer Loader 1(Fuji Electric,2006)
15.Transfer Loader 1(Fuji Electric,2006)
16.Transfer Loader 1(Fuji Electric,2006)
17.Transfer Loader 1(Fuji Electric,2006)
18.Transfer Loader 1(Fuji Electric,2006)
19.Transfer Loader 1(Fuji Electric,2006)
20.Transfer Loader 1(Fuji Electric,2006)
21.Transfer Loader 1(Fuji Electric,2006)
22.Palletizer (Fuji Electric,2006)
23.Material Conveyor (Fuji Electric,2006)
24.Conveyor (Fuji Electric,2006)
25.Conveyor (Fuji Electric,2006)
26.Stock Conveyor 1(Fuji Electric,2006)
27.Stock Conveyor 2(Fuji Electric,2006)
28.Measuring ST Stock Conveyor1(Fuji Electric,2006)
29.Measuring ST Stock Conveyor2(Fuji Electric,2006)
30.Measuring ST Stock Conveyor3(Fuji Electric,2006)
31.Measuring ST Stock Conveyor4(Fuji Electric,2006)
32.Measuring ST Stock Conveyor5(Fuji Electric,2006)
33.Measuring ST Stock Conveyor6(Fuji Electric,2006)
34.Chip Conveyor(Cosinic, 2006)
35.Chip Conveyor(Cosinic, 2006)
36.Nut Forming Machine(Nissei,2006)
37.Nut Forming Machine(Nissei,2006)
38.Key Groove Processing machine(Sanyo,2006)
39.Center Hole Measuring Equipment(Fuji,2006)
40.Grease Application Equipment(Fuji,2006)
41.Grease Application Equipment(Fuji,2006)
42.Grease Application Equipment(Fuji,2006)
43.Air Blow Equipment(Fuji,2006)
44.Pin Measuring Equipment(Fuji,2006)
45.Pin Measuring Equipment(Fuji,2006)
46.Pin Measuring Equipment(Fuji,2006)
47.Pin Grinder(Techno, 2006)
48.Key Groove Chamfer Machine(Techno, 2006)
49.Sinter machine(Higatsu, 2006)
50.Hole machine(Higatsu, 2006)
51.Crank machine(Umuco, 2006)
52.Air unit(Japan,2006)
53.Slurry treatment machine(Japan,2006)
54.Key Groove Take(Tosok, 2006)
55.Checker for Crankshaft(Japan, 2006)
56.Checker for Crankshaft(Fuji, 2006)
57.Key Groove Gauge
58.Journal Checking Machine(Tokyo Precision,2006)
59.Checking Machine(Tokyo Precision,2006)

BMJ KOREA CO.,LTD
DIRECTOR:JONGDUK
E-MAIL:paekJs1961@gmail.com
MOBILE)+82-10-7499-2567




2006
Price  
  KR   request
121900245 101

MORI SEIKI NH 5000 DCG 40 for sale
Horizontal Processing Centers


, 195 mm, 60 ATC, tool spindle DIA BT-40 type taper pallet size 500 x 500 mm, 850 mm, X/Y/Z 730 / 730 / YoM 2009 B, - with CNC FANUC 31iA (MSX-701) 19 "screen (spiral interpolation, high-speed of contouring control  ...
used machine
 
, 195 mm, 60 ATC, tool spindle DIA BT-40 type taper pallet size 500 x 500 mm, 850 mm, X/Y/Z 730 / 730 / YoM 2009 B, - with CNC FANUC 31iA (MSX-701) 19 "screen (spiral interpolation, high-speed of contouring control I + II, tool compensation), 4th axes for pallet-table , Tool-break age-control and lifetime control, through spindle coolant, multi angle KNOLL filtration and high pressure coolant unit rounding/chamfering functionality, 30 and 70 bars, KNOLL unit for external coolant pump (5-7 bar / 100 L / min)
2009
Price  
    request
121764409 101

MORI SEIKI MV 40 for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI MV 40B-Nr. 1105-01014 make MORI SEIKI type MV 40B built 1990 State second-hand machine CNC CNC FANUC OM storage HAGUENAU country of origin Japan delivery immediately cargo base deta ...
used machine
 
Machining center - vertical MORI SEIKI MV 40B-Nr. 1105-01014 make MORI SEIKI type MV 40B built 1990 State second-hand machine CNC CNC FANUC OM storage HAGUENAU country of origin Japan delivery immediately cargo base detail technical from location ails x way 800 mm y-way 400 mm z trail 500 mm CNC FANUC OM rapid traverse x axis 20 m/min rapid traverse y - direction of 20 m / min rapid traverse Z axis 15 m / min table surface 1150 x 450 mm tool holder BT 40 number of toolholders 30 max tool diameter 80 mm max. Tool length 250 mm of maximum tool weight 8 kg RPM-8000 RPM total power consumption 5,5 / 7,5 kW description very well PRESERVED MACHINE
CONTROL FANUC OM
WITH 4 AXIS NIKKEN
1990
9,000 €  
    request
121760092 102

DMG MORI Sprint 65 3T for sale
CNC Double Spindel Turning Maschines (Lathes)


OVERVIEW: Brand: DMG MORI Model: Sprint 65 3T Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 7189 Spindle hours: 5347 Location: Germany Origin  ...
used machine
 
OVERVIEW:
Brand: DMG MORI
Model: Sprint 65 3T
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 2014
Production hours: 7189
Spindle hours: 5347
Location: Germany
Origin country: Italy

GENERAL DATA:
Measurements width: 6870 mm
Measurements depth: 1660 mm
Measurements height: 2626 mm
Machine weight: 10300 kg

MAIN DRIVE:
Number of spindle: 2
Spindle speed range: 0-5000 1/min
Spindle motor power: 22 kW
Spindle bore: 65 mm

CONTROL UNIT:
Brand: Siemens
Model: 840D-SL
Interface: USB, Ethernet

TURRET:
Number of turrets: 3
Number of Tool-Slots: 12
Rotating tools: yes
Tool taper: VDI 30

MEDIA:
Main electronic connection: 400 V / 50 Hz
Power consumption: 95 kVA
Air pressure: 6 bar
Lubrication tank: 600 L
Oil tank: 40 L
Oil pressure: 50 bar

ADDITIONAL EQUIPMENT:
1 - Cucchi Giovanni Bar loader (DBEVO-14.455)
2 - Lubrication unit with fine filter
3 - 6x Tool holder (upon request)
4- 22x Driven tool holder (upon request)
2014
Price  
  DE   request
121759957 101

MORI SEIKI NH 8000 DCG for sale
HORIZONTAL CENTER


BRAND : Mori Seiki MODEL : NH 8000 DCG YEAR : 2007 Type Control MSX-501 X-axis stroke 1400 mm Axis Y stroke 1200 mm Z-axis stroke 1350 mm Chuck Type ISO 50 Spindle speed 8000 rev / min Spindle power 30 Kw ...
used machine
 
BRAND : Mori Seiki
MODEL : NH 8000 DCG
YEAR : 2007
Type Control MSX-501
X-axis stroke 1400 mm
Axis Y stroke 1200 mm
Z-axis stroke 1350 mm
Chuck Type ISO 50
Spindle speed 8000 rev / min
Spindle power 30 Kw
Vaulting ø 1450 mm
N. 2 pallets in continuo800 x 800 mm
Tool magazine Random 138 positions
chip conveyor
2007
Price  
  IT   request
121743631 101

DMG MORI DMC 850 for sale
Numerically Controlled Machining Centres


Milling machine - vertical DMG DECKEL MAHO DMC 850 bearing no 1105-02342 category milling machine - vertical make DMG DECKEL-MAHO type DMC 850 year 2016 State second-hand machine control CNC storage France country of ori ...
used machine
 
Milling machine - vertical DMG DECKEL MAHO DMC 850 bearing no 1105-02342 category milling machine - vertical make DMG DECKEL-MAHO type DMC 850 year 2016 State second-hand machine control CNC storage France country of origin Germany delivery after Consultation of cargo base factory further details on request technical details feed (longitudinal/transverse/vertical) 42 mm/min rapid traverse - longitudinal/transverse/vertical 36 m / min working area along 850 mm, transverse 520 mm vertically 475 mm tool changer 60 use vertical Ma gazinart chain number tools 60 maximum tool length 250 mm maximum tool diameter 80 mm max Werkzeugdurch. free neighboring box. 130 mm clamping system DIN 69872 space approx. 3 x 3.21 x 2.70 m weight approx. 5.5 t drive type AC drive power 100% ED 15 kW 40% ED 18 kW speed range 140000 RPM tool holder SK 40 / DIN 69871 table surface 1200 x 560 mm allowed B elastung (table Center) 1100 kg keyway width 14 mm number of grooves 5 PCs.

Description - control HEIDENHAIN CNC 3D path control manager 640
Full cabin
-Electronic hand wheel
-Chip conveyors (scratch band), discharge height 950 mm
FASHION 4 9000 SPINDLE HOURS
RENISHAW LASER BLUM
2016
Price  
    request
121724537 103

DMG MORI DMU 105 monoBLOCK for sale
CNC Milling Centers


OVERVIEW: Brand: DMG MORI Model: DMU 105 monoBLOCK Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2014 Production hours: 14355 Location: Italy Origin countr ...
used machine
 
OVERVIEW:
Brand: DMG MORI
Model: DMU 105 monoBLOCK
Application type: Milling
Machine type: Machining Center
Availability: Immediately
Construction year: 2014
Production hours: 14355
Location: Italy
Origin country: Germany

GENERAL DATA:
Measurements width: 2900 mm
Measurements depth: 4200 mm
Measurements height: 2820 mm
Machine weight: 23000 kg

MAIN DRIVE:
Spindle speed range: 24000 1/min

CONTROL UNIT:
Brand: HEIDENHAIN
Model: 530 HSC

MOVEMENT:
X-AXIS movement: 1250 mm
Y-AXIS movement: 1050 mm
Z-AXIS movement: 900 mm
A-AXIS movement: +/- 120º
B-AXIS movement: 360°

WORKPIECE:
Workpiece x: 1250 mm
Workpiece y: 1050 mm
Workpiece z: 900 mm
Workpiece weight: 2200 kg

TABLE:
Outer length: 1400 mm
Outer width: 1050 mm

TOOLS:
Max tool diameter: 180 mm

MEDIA:
Main electronic connection: 400 V / 50 Hz
Power consumption: 45 kVA
Chip conveyer: yes
Internal cooling: yes

ADDITIONAL EQUIPMENT:
1 - Measuring Probe
2 - Bluhm tool measuring system
3 - Probes for thermocontrol machine structure
4 - Air cooling through spindle
5 - 600 L tank with paper filter
6 - Cooled screws
7 - Water gun to wash/clean pieces
8 - Remote control (Joystick)
9 - Rotoclear
10 - Tandem Drive Table. Double engine A axis for up to 2200 kg workpiece weight
2014
Price  
  IT   request
121704685 101

MORI SEIKI MV 40 B for sale
CNC Vertical Machining Centre


Table size 900 x 380 mm Number of pallets 2 Movement x-Axis 800 mm y-Axis 410 mm z-Axis 510 mm Number of tools in magazine 30 pieces Maximum spindle speed 8.000 min Tool taper MAS BT 40 CNC Control Mori Se ...
used machine
 
Table size 900 x 380 mm
Number of pallets 2
Movement x-Axis 800 mm
y-Axis 410 mm
z-Axis 510 mm
Number of tools in magazine 30 pieces
Maximum spindle speed 8.000 min
Tool taper MAS BT 40
CNC Control Mori Seiki MF-M4 (Fanuc 0-M)
1992
Price  
  NL   request
121704346 804  

KOMORI KOMORI lithrone S428 for sale


Good Japan press
used machine
 
Good Japan press
2002
200,000 €  
  EE   request
121704283 102

DMG MORI GILDEMEISTER CTX gamma 2000 TC for sale
CNC Turning Machines


CNC turning and milling center manufacturers: DMG Mori Type: CTX gamma 2000 TC Year of construction: 2011 Control: Siemens 840 DSL with ShopTurn: turning length: 2000 mm Y-axis: +/-200 mm B-axis: +/-120° Spindle b ...
used machine
 
CNC turning and milling center manufacturers: DMG Mori
Type: CTX gamma 2000 TC
Year of construction: 2011
Control: Siemens 840 DSL with ShopTurn: turning length: 2000 mm
Y-axis: +/-200 mm
B-axis: +/-120°
Spindle bore: draw tube inner - Ã? 104 mm
Power: 35/45kW
Weight: approx. 25.000 kg

Facilities

Tool carrier: 120 x HSK 63
C-axis hydraulic clamp
Power 13.2 / 40% 22 kW
Main and sub spindle ISM 102
Tailstock function for the counter spindle
Off-center turning and milling
Blum tool survey
Milling of gear teeth in the hobbing process
5-axis simultaneous machining
Automatic Schiebehaubenbetätigung
NC bezel slides Z errors excepted
2011
Price  
    request
121704275 102

DMG MORI GILDEMEISTER CTX beta 1250 TC for sale
CNC Turning Machines


CNC turning and milling center manufacturers: DMG Mori Type: CTX beta 1250 TC Year of construction: 2010 Control: Siemens 840 d shop turn Y-axis: +/-100 mm Turning length: 1250 mm Weight: approx. 11,000 kg Main s ...
used machine
 
CNC turning and milling center manufacturers: DMG Mori
Type: CTX beta 1250 TC
Year of construction: 2010
Control: Siemens 840 d shop turn Y-axis: +/-100 mm
Turning length: 1250 mm
Weight: approx. 11,000 kg

Main spindle of ism76 with C-axis

Power: kW 25/34
Speed: 5000 RPM

Counter spindle of ism52 with C-axis

Tailstock function
Transmission: 15/20 kW
Speed: 6000 RPM

Milling spindle B-axis +-110°

Tool holder: Capto C6
Transmission: 19/22 kW
Speed: 12.000 rpm

Facilities:

-Tool measuring system in the work area
-Hydraulic hollow clamping fixture - 48-fach chain-type tool magazine
-600 l tank with belt filter and cooling 8/20 bar
-Mechanical oil mist separators
-Conveyors
-Off-center turning and FräÃ?bearbeitung

Errors excepted
2010
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter