Category: 825 pre press: other / Printing plate punches
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 144363014
New in: 2004

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de

add to watchlist

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Category: 825 pre press: other / Printing plate punches
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 145237833
New in: 2001

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de

add to watchlist

Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.

Category: 825 pre press: other / Printing plate punches
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 147102381
New in: 2014

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de

add to watchlist

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Category: 825 pre press: other / Printing plate punches
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 158072207
New in: 2005

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794196

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching machine make EDEL type punching professional 400 SMachine -No: 2951392 Year 1992Punching force: 40 tWorking area: 1500 x 900 mmTravel depth stop: 450 mmTravel length stop: 750 mmTool size up to: 100 or 135 mmMaterial thickness up to: 12 mmPunching examples: 100 in 3.5 mmor: 30 in 10 mmPunching sequence (about time interval): 1.5 sDimensions L x W x H approx : 1500 x 1500 x 1700 mmWeight approx: 2000 kgWith- several toolslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794197

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic punching machine make PEDDINGHAUS type hydraulics 1000 NMachine -No: 4206879484010, year of construction 1984Printing capacity: 100 tStroke infinitely adjustable: 10 - 100 mmStrokes per minute: 80 - 34Projection: 510 mmWorking height: 1074 mmInstallation height: 440 mmpunched: 39 in 20 mmor with optional equipment: 65 in 12 mm: 90 in 8.5 mm: 130 in 6.0 mmOil filling: 150 lRated power: 15 kWWeight approx: 4,4 tExternal dimensions approx L x W x H: 1954 x 1000 x 2250 mmWith- Coordinate template table for workpiecesxa0xa0 up to 500 x 1000 mm- Swivel bracket- Ball support table- a lot of accessoriesused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794199

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794204

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Pneumatic punching machine make EDEL type HP 16-600 SBFabr. -No: 20104Punching force: 16 tPunching capacity: 24 in 5 mmor: 40 in 3 mmor: 50 in 2 mmfor tools up to: 70 mmDischarge: 600 mmStamp recording: 24 Drm. x 85Die height: 78 mmRam stroke: 13 mmDistance scraper - die: 6.5 mmAir requirement per punching: 45 NLMachine weight: 600 kgExternal dimensions machine L x W: 300 x 1050 mmUnderframe: 1100 x 560 x 380 mmWith- Steel base- Material support table- Quick change tool setsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794209

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Universal punch make EDEL type VM 40/350Machine -No: 24735456 Year of construction 1976Punching force: 40 tProjection: 350 mmStrokes per minute: 60Punches: 24 in 12or: 50 in 6Klinkleistung: 100 x 100 in 5 mmDrive power: 2.2 kWWeight approx: 1100 kgOutside dimensions approx: 780 x 1300 x 1750 mmWith- Rectangle - Notecards (currently furnished)- Tool carrier for punching out punch 68 mm- many punching tools- Footswitchused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794210

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic punching machine make GEKA type Puma 70 - E 750Machine -No: 1162 Year 1999Punching force: 70 tPunching capacity: 27 in 20 mmpunches max. diam.: 70 in 8.0 mmor diam.: 100 in 5.0 mmor rectangular: 50 in 8.0 mmor rectangular: 60 in 7.0 mmor rectangular: 70 in 6.0 mmDischarge: 750 mmWith- separate control PT 700 / Leonard and Bauer Economicxa0xa0 for positioning table for punching gusset plates- Footswitchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794212

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching machine make EDEL type HM 25/250Machine -No: 222191169, built in 1969Technical specifications:Cutting pressure max .: 25 tProjection / entry depth: 250 mmpunches holes up to dia. : 20, 26, 30, 40 mmin leg irons up to thickness: 10 / 7.5 / 6.5 / 4 mmpunches mitres andNotches in L-irons up to: 40 x 40 x 5 mmStamp size (shaft diameter x length): 30 x 120 mmDrive power: 2 HPWeight: approx. 900 kgExternal dimensions: 1400 x 900 x 1800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Punches
Latest update: 25.12.2023 add to watchlist
item-No.: 95804500

used

Seller: NORDPRÄZISION Werkzeugfabrik GmbH
Location: Land-de
Price: 800 € add to watchlist

Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request

Category: 107 sheet metal working / Hole Punches
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 127261373

used

check Seller: Venker Werkzeugmaschinen GmbH
Location: 33335 Gütersloh, Anemonenweg 8 Land-de
Price: 4.700 € add to watchlist

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Category: 842 paper converting: die cutters / Punches
Latest update: 19.10.2023 add to watchlist
approved
dealer
item-No.: 146413918
New in: 1991

used

check Seller: Schokoma GmbH
Location: Land-de

add to watchlist

For punching out packing material (paper and cardboard) Various die-cutting stencils for chocolate bars and chocolates Produced at Hamburg. (cost approx. 300€) Good condition, still in use Y/O'A 1991 From Germany

Category: 842 paper converting: die cutters / Punches
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 149650557
New in: 1990

used

check Seller: Seemüller Grafische Maschinen GmbH
Location: 82152 Planegg Land-de

add to watchlist

recently refurbished by Bobst, more details on request

Category: 107 sheet metal working / Hole Punches
Latest update: 26.01.2024 add to watchlist
approved
dealer
item-No.: 157436349
New in: 1984

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Category: 107 sheet metal working / Hole Punches
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 157781020

used

check Seller: Venker Werkzeugmaschinen GmbH
Location: 33335 Gütersloh Land-de
Price: 7.700 € add to watchlist

Punching force: 500 kN Projection: 610 mm Punches e.B. a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price

Category: 107 sheet metal working / Hole Punches
Latest update: 20.12.2023 add to watchlist
approved
dealer
item-No.: 157901071
New in: 1982

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

Specifications: - Pressure capacity 450 KN - perforates e.B. up to 25 mm Ø in steel 15 mm - Stroke infinitely adjustable 0 to 60 mm - Stroke rate approx. 16 to 47 1/min - Projection 760 mm - Installation height 215 mm - Working height 1150 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces of various punches + dies

Category: 107 sheet metal working / Hole Punches
Latest update: 13.11.2023 add to watchlist
approved
dealer
item-No.: 158599371

used

check Seller: STOCKEUROSTOCK SRL
Location: 44100 Ferrara Land-it

add to watchlist

TRUMPF TRUMATIC 600L Work area: 3000 x 1600 mm. Hours: 29.000

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794195

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic punch pliers make ECKOLD type ML 10/25Make -No: 1389/2657, year of construction 1993designed and coordinated for re-punching the bent sheet metal overhangson air duct flangesTechnical specifications:punch pliers:Max. pressing force: 3 Mpdesigned for hole diameter: 9.5 mm in 1.0 mm VAhorizontal tool throat: 25 mmused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794198

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic punching machine make PEDDINGHAUS type 225 H 13Fabr. -No: 818C004 built in 1975Punching force: 50 tProjection: 370 mmStroke: 60 mmOil content: 120 lStrokes per minute: 34punches: 25 in 16 mmor: 20 in 19 mmDrive power: 10 hpDimensions: 2230 x 860 x 1680 mmWeight approx:1,0 tWith- several stamps and diesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794200

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching press Fabr. RASHIN type 225/20Punch diameter max.: 20 mmProjection: 225 mmWith- Support and notice tableusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794201

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching Press Fabr. JOKA Type SW 100 - 250Punch diameter max.: 100 mmDischarge: 250 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794202

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching press make SUPRA type PA 8 - 150Max. Punching pressure: 8.0 tProjection: 150 mmOutside dimensions approx: 240 x 140 x 35 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hole Punches
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794203

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Punching press make CEWE type LW 35 - 150Max. Punching pressure: 35 tProjection: 150 mmOutside dimensions approx: 270 x 75 x 140 mmmounted on base plateWith- Depth stopusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online