used MOL Paper drilling machines

Multi-spindle Gundrilling Machine Manufacturer: Mollart Type: Omnisprint YOM: 2000 Serial number: A438-0700 CNC Control: GE-Fanuc 18 M 2 Spindles Min-Max drilling diameter: 3-12 mm Max Drilling depth: 500 mm X axis cross travel: 500 mm Y axis vertical travel: 250 mm Z axis travel: 800 mm Spindle centre distance: 250 mm X-axis rapid traverse speed: 10 m/min Y-axis rapid traverse speed: 4 m/min Z-axis rapid traverse speed: 10 m/min Work table dimensions: 600x600 mm Spindle centre height from table: min 117 max 377 Max weight on table: 680 Kgs A.C. Spindle motor power: 3.7 KW Spindle speed range: 0-10,500 rpm Drill feed range (infinitely variable): 0 mm-4.000 rpm Feed motor torque (continuous): 5.9 Nm Weight of the machine: 4500 kg Weight of the coolant system (dry): 1000 kg Coolant ...

Deephole Drilling Machine MOLLART model LD2-500 Manufacturer: Mollart Type: LD2-500 YOM: 2005 Serial number. A281 - 1295 CNC Control: GE-Fanuc Power Mate 2 Spindles Min-Max drilling diameter: 2-20 mm Max Drilling depth: 500 mm Drill feed range: 0-3000 mm/min Engine power: 5.5 kW Extra: Counter rotating workpiece, Chip Conveyor, High Pressure Pump, Coolant Filtration 20 micron, 1200l tan, 100bar Feeds: 10 m/min Max workpiece lenght: 500 mm Spindle speed: 10600 rpm Weight: 3500 kg Rapid traverse: 6.000 mm/min

Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique., Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate,  ...

This MOLDMASTER Y-602 ZLC (2001) Erosion machines was manufactured in 2001 in Taiwan. It is equipped with 3 axis (X = 1000 mm / Y = 600 mm / Z = 500 mm) and a table size 1250 x 750mm with max. workpiece load of 4500 kg. The machine comes with a 120 AMP generator and tank (1900x1100x600 mm).

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

Stock# U2301-1 Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d II ...

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Used Molteni two-tank dissolver. The mixer has two tanks with capacity. 2,500 liters each. While mixing in the first tank, the second tank is emptied. Next the agitator from first tank is hydraulically lifted and transfferd to second tank. During mixing tank is rotated counter to the rotation of the dispersing disc. Hydraulic drive of the agitator. EX. Tank has a manual product scraper from the sides.

not checked for completeness, stainless steel housing + frame

Mollart Sprint 500 deep hole drilling machine Fanuc Power Mate control Max L = 500mm Dia 20 mm Spindles: 2 Spindle rotation: 10000 RPM 100 RPM counter spindle rotation Max pressure 100 BAR The machine can be inspected under power in our warehouse in Gussago BS. Mimu machine tools

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

Molteni Pearl Mill MS.15 Explosion protected version Grinding tank 15 l Double jacket Power 17,5 kW Very good operational condition, directly from production!!!

Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992

Hot Runner Controller - Mold Masters M1-24-24 Year of construction: 2016 Location: Lodz, Poland 24 hot zones with cabling All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

* General * SKU248T594 * LocationBarneveld * MakeMolteni * TypeI 300 * No.25-12 * Year of construction1968 * Main Features * MaterialMild steel * Volume250 Ltr. * Motor7.5 KW * Specified Features - Planetary mixer * Planetary mixercheck * Motorcheck 7.5 kW, 380 Volt (Ciem) * With variable speed drivecheck * Speed scraper1450-950 rpm * With pancheck (2x) * Capacity250 Ltr. * Pan sizesdia. 700x680 mm * MaterialStainless steel * Information * Total height1,6 m * Weight1500 kg * Floor space1,6x1 mPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU020C055 * LocationBarneveld * MakeMolteni Milano * TypePH-900 SV * No.12-3 * Year of construction1982 * Material * Pan materialStainless steel * Pressure * Working pressure0 Bar * Vacuum possiblecheck * Main Features * MaterialStainless steel * Volume750 Ltr. * Motor30 KW * Specified Features - Planetary mixer * MaterialStainless steel * Planetary mixer(1x) * 2 Mixing/kneading shaftscheck * With scrapercheck * Hydraulic drivecheck * Motor30,0 KW, 380 Volt (Ex) * With variable speed drivecheck * With covercheck * With pan(1x) * Capacity750 Ltr * Pan sizesdia. 1000x1000mm * With jacketcheck * With hydraulic liftingcheck * Information * With switchcheck * Floor space3,1x1,3 M * Total height3,1 M * Weight4600 KG * ATEX compatiblecheckPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

* General * SKU204N022 * LocationBarneveld * MakeOfficine meccaniche Molteni srl * TypePFF 10 ES SV * No.1 * Year of construction1990 * Material * Pan materialStainless steel * Pressure * Working pressure0 Bar * Vacuum possiblecheck * Working pressure jacket6 Bar * Vacuum possible jacketcheck * Main Features * MaterialStainless steel * Volume15 Ltr. * Motor5.5 KW * Specified Features - Planetary mixer * Planetary mixercheck * 2 Mixing/kneading shaftscheck * With scrapercheck * Hydraulic drive2x Bucher ASM25 * Motor5,5 KW, 220 Volt * With variable speed drivecheck * Speed mixing/kneading armsbottom 0-370 rpm, midde 0-300 rpm. * Speed scraper0-50 rpm. * With covercheck * With pancheck * Capacity15 Ltr * Pan sizesdia. 300mm x 210mm * Outlet+/- 40mm * With jacketcheck * With hydraulic liftingcheck * MaterialStainless steel * Information * With switchgearcheck * Floor space2,0x0,5 M * Total h ...

* General * SKU016G049 * LocationBarneveld * MakeMolteni Milano * TypeH-5 S.V. * No.30-5 * Year of construction1982 * Pressure * Working pressure0 Bar * Vacuum possiblecheck * Main Features * MaterialStainless steel * Volume5 Ltr. * Motor0.75 KW * Specified Features - Butterfly mixer * Butterfly-mixer(1x), without pan * Shaft length230mm * Butterfly diameter200mm * With covercheck * Motor0,75 KW, 220/380 Volt (Ex) * With variable speed drivecheck * With mechanical liftingcheck * With vacuum pumpcheck * Motor0,75 KW, 220/380 Volt (Ex) * MaterialStainless steel * Information * With switchcheck * Floorspace1,1x0,8 M * Total height2,0 M * Weight320 KG * ATEX compatiblecheckButterfly mixersMolteniMixers > Butterfly mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

* General * SKU019G053 * LocationBarneveld * MakeMol Dart Diest * No.150 06 002 * Year of construction2006 * Main Features * MaterialStainless steel * Volume150 Ltr. * Motor0.55 KW * Specified Features - Stirring vessel * MaterialStainless steel * Closed stirring vessel(1x) * Capacity150 Ltr * Vessel sizesdia. 600x550mm * Flat top sidecheck * With covercheck * Outletdia. 30mm * With jacketwith electric heating (4000 Watt) * Max. temperature60 Degr. C. * With gate type stirrerscraper stirrer * Motor0,55 KW, 230/400 Volt * Information * Mounted on legsMounted on wheels * With switchgearcheck * Floorspace1,3x1,1 M * Total height1,7 M * Weight450 KGStirring vesselsMol DartStirring vessels > Stirring vesselsBrand > Mol Dart What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

* General * SKU253N189 * LocationBarneveld * MakeMolteni Officine Mecc. Milano * TypeTM 600 * No.33-18 * Year of construction1971 * Main Features * MaterialMild steel * Motor15 KW * Specified Features - Dissolver * MaterialMild steel * Dissolvercheck * Shaft length700 mm * Disc diameter250 mm * With covercheck * Manhole700 x 250 mm * With scrapercheck * Motor15 KW, 400 Volt * With variable speed drivecheck * With hydraulic liftingcheck * Motor1 KW, 220/380 Volt * Information * Floorspace2,2 x 1,0 M * Total height2,1 M * Weight1520 KGDissolversMolteniMixers > DissolversBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU002H003 * LocationBarneveld * MakeMolteni Milano * TypeTM 5 - SV * No.26-5 * Year of construction1979 * Main Features * MaterialStainless steel * Volume5 Ltr. * Motor0.95 KW * Specified Features - Dissolver * Dissolver(1x) * Shaft length200mm * Disc diameter80mm * Motor0,80/0,95 KW, 380 Volt (Ex) * With variable speed drivecheck * Speed mixing shaft± 400-2400 Rpm, Without mixing pan * With mechanical liftingcheck * MaterialStainless steel * Information * With switchcheck * Floorspace0,8x0,6 M * Total height1,0 M * Weight140 KG * ATEX compatiblecheck * Extra Specifications-- RECONDITIONED -- ReconditionedDissolversMolteniReconditionedMixers > DissolversBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

Description: TCS MOLDING SYSTEMS TCS - 100T Press no. 47 100 ton 415V | 50Hz | 23Kw Max. pressing force: 100 to, table surface area l x w : 1248x1148 mm, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,900 x 2,300 mm, weight approx.: 14,000 kg

Description: Drive motors Material rotation: 2x 1.5 kW Cutting arm/unit: 2x 0.7 kW KRM unit: 2x 0.75 kW Control system: Siemens Simatic MMI C7-635 Working width: max. 500 mm Diameter: max. 300 mm Operating voltage: 400V / 50Hz Operating pressure: 6 - 7 bar Operating instructions control CD with program and FI parameters hydraulic plan and circuit diagrams are available Approx. Onsite Dimension. (l x w x h): 3,700 x 1,600 x 2,050 mm, weight approx.: 1,300 kg