Category: 103 milling machines / High Speed Milling Centres (HSC)
Latest update: 10.11.2023 add to watchlist
item-No.: 162785761
New in: 2008

used

Seller: Luhan Werkzeugmaschinen
Location: 89547 Gerstetten Land-de

add to watchlist

Key data: 800 mm, 600 mm, 550 mm

Control Heidenhain ITNC 530 60-fold tool changer Spindle HSK 50 E with 36,000 rpm 4-fold pallet changer, pallets 800 mm x 400 mm Table chuck Infrared Probe PS 32 electr. Handwheel Laser Tool Measurement Spindle cooling unit

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157754883

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Operating hours: 43291 Technical data Number of axis total: 3 Table length: 850 mm Table width: 530 mm Number of T-channels: 6 Distance of the T-slots: 63 mm T-channel width: 14H12 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer: Number of tools: 36 Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 40 kW Time under power: 62694 Hour Operating time: 43291 Hour Working time: 53367 Hour Spindle run time: 1304 Hour Noise level: 75 dB (A) Machine´s weight about: 6500 kg Overall dimensions machine: Length: 2500 mm Width: 1600 mm ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817201

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 57489 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 250 mm Number of spindles: 1 Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 240 mm Vertical travel (z axis): 350 mm B axis swivelling range: +/-110 ° C axis: 360 ° Table speed: 250 rpm Clamping torque C-axis: 500 Nm Torque max.: 217 Nm Pallets chanching device:: EROWA ITS 148 number: 20 Diameter: 160 mm Tool changer: Number of tools: 68 Tool diameter max.: 65 / 30 mm Tool lenght: 155 / 100 mm Spindle nose: HSK: E40 Spindle speeds: stepless from: 100 rpm up to: 42000 rpm Work feed rate: 1 - 40 m/min Rapid traverse:: 42 m/min Air connect: 6 bar Voltage 50  ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817212

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 M Operating hours: 22211 Technical data Number of axis total: 3 Number of spindles: 1 Table load max.: 200 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 350 mm Pallets chanching device: number: 10 Length: 240 mm Width: 240 mm Tool changer: Number of tools: 36 Time of tool changing: 10 sec Average chip-to-chip time: 12.5 sec Spindle nose: HSK: E40 Spindle speeds: stepless from: 100 rpm up to: 42000 rpm Work feed rate: 1 - 40 m/min Feeds: X axis: 0 - 40 m/min Y axis: 0 - 40 m/min Z axis: 0 - 40 m/min Rapid traverse:: 42 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 kW Time under power: 25671 Hour Operating time: 22211 Hour Wo ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817398

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 40317 Technical data Number of axis total: 5 Rotary table:diameter: 250 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 240 mm Vertical travel (z axis): 350 mm B axis swivelling range: +/-110 ° C axis: 360 ° Pallets:: EROWA ITS 148mm number: 20 Tool changer:: TCD Number of tools: 36 Spindle nose: HSK: 40E OptiCool Spindle speeds:: StepTec stepless from: 100 rpm up to: 42000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 40000 mm/min transversal from: 1 mm/min up to: 40000 mm/min vertical from: 1 mm/min up to: 40000 mm/min Rapid traverse:: 42 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 13 kW Machine´s weight about: 6500 kg Overall dim ...

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
item-No.: 162903507
New in: 2001

used

Seller: Exapro
Location: Land-fr
Price: 22.000 € add to watchlist

MIKRON VCP 710 high speed vertical machining center with HEIDENHAIN 426 control. Unique opportunity, machine in perfect condition. Including magnetic plane and all its mandrels. X axis travel 710 Y 600 Z 500. Spindle speed 18000 rpm, chip conveyor.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
item-No.: 163459791
New in: 2002

used

Seller: Exapro
Location: Land-it
Price: 21.500 € add to watchlist

X-axis travel 400 mm Y-axis travel 450 mm Z-axis travel 350 mm Heidenhain 530 numerical control Table length 500 mm table width 450 mm Number of tools 18 Spindle rotation speed 42,000 Rpm HSK E 40 spindle connection Weight 6500kg BLUM laser system Spindle cooling system

Category: 101 boring mills and machining centers / Portal machining centres
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 147206124
New in: 1998

used

check Seller: Sidermac machine tools srl
Location: Land-it

add to watchlist

X-travel: 700 mm Y-travel: 550 mm Z-travel: 450 mm Control Heidenhain Atek HS Plus Spindle taper HSK 40E Spindle speed 42.000 rpm ATC 24 positions Clamping table 900 x 550 mm Weight of the machine ca. 6,5 t VIDEO: abcs://youtu.be/V4PdQu-AYcA

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 27.03.2024 add to watchlist
item-No.: 160383338
New in: 2018

used

Location: Land-cz

add to watchlist

Machining center vertical MILL P 500 U Manufacturer: Mikron Year: 2018 Control Heidenhain ... TNC 640 Clamping table surface ... 350x350mm Axis X ... 500mm Axis Y ... 600mm Axis Z ... 450mm Spindle speed ... 10-20000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A63 Table latch ... 200kg Axis A ... +91/-121° Axis C ... 360° Plate change ... 7 Magazine places... 120 Machine weight... 13000kg L x W x H ... 4280x3920x3340mm The machine is in good condition, possible to test under electricity.

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 160465329
New in: 2020

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

GF Mikron 500U VMC, 2020- 5-Axis, HSK, Low Hours, Excellent Condition,Probe Year: 2020 X-axis- 19.68 in (500 mm) Y-axis – 17.71 in (450 mm) Z-axis – 15.74 in (400 mm) B-axis – 65°/+120° C-Axis- 360° endless Spindle drive type- Cartridge Spindle max.- 20,000 RPM Spindle Power at S1-30.8 HP (23kW) Spindle Power at S6-48.2 HP (36 kW) Spindle Torque at S6-88.5 ft. lbs. (120 Nm) Spindle tool interface- HSK-A63 Distance from table top to spindle 5.90 – 21.65 in (150 – 550 mm) Rapid traverse X,Y & Z 1,181 min (30 m/min) Acceleration X,Y & Z .3g (3 m/sq. sec.) Rapid speed B/C 32/112 RPM Tool changer capacity- 60 tools Work table size- 19.68 in (500 mm) Maximum payload on table 440 lbs (200 kg) Typical table height 38.58 in (980 mm) Number of T-slots 7 T-slot spacing- 2.48″ in (63 mm) T-slot dimension- 0.55 in (14 mm) Coolant tank capacity- 158 gal (600 L)  ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 160798134
New in: 2002

used

check Seller: MARC
Location: 67500 HAGUENAU Land-fr

add to watchlist

Machine Details Stock number 1105-03802 Machine type machining center - vertical Brand MIKRON Type VCP 600 Year of construction 2010 Control type CNC Control heidenhain 430 Storage location FRANCE Country of origin SWITZERLAND Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control heidenhain 430 Table clamping surface 850 x 530 mm Table load 0.40 t Number of T-slots 6 T-slots - distance 63 mm T-slots - width 14H12 mm Spindle speeds - infinitely variable 100 - 20,000 rpm Spindle motor 12,00 kW Tool holder HSK-A63 Tool changing device 30 Tool diameter 90 mm Tool diameter with 2 free spaces 110 mm Tool length - max. 250 mm Tool weight max. 6.00 kg Chip-to-chip time approx. 7.00 sec Feed infinitely variable 0 - 22,000 mm/min Rapid traverse 22.00 m/min Feed force X/Y/Z axis 5000 N Tota ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 15.05.2023 add to watchlist
approved
dealer
item-No.: 160884479
New in: 2012

used

check Seller: Mac-Tec
Location: 56281 Emmelshausen Land-de

add to watchlist

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 161528937

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Longitudinal X: 400 mm Cross Y: 240 mm Vertical Z: 350 mm Positions ATC: 40   CNC Brand: Heidenhain X - Travel:     400mm Y - Travel:     240mm Z - Travel:     350mm A - Axis:       110° B - Axis:       360° Table load:     25 Table  Ø:       250mm Feed rate X-Axis:40000mm/min. Feed rate Y-Axis:40000mm/min. Feed rate Z-Axis:40000mm/min. Spindle Taper:  40ISO/Bt/Mk Speeds / ranges:42000Rpm Length:         2900mm Width:          2400mm Height:         2700mm Weight:         5500kg

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 162284375
New in: 2018

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

GF Mikron E 500 U 5-Axis CNC Vertical Machining Center Year: 2018 SPECIFICATIONS: X-AXIS 19.69" Y-AXIS 17.72" Z-AXIS 15.75" # AXIS 5 SPINDLE SPEED 12,000 RPM ATC CAPACITY 30 TAPER BT 40 EQUIPPED WITH: 1k cutting hours Heidenhain iTNC 530 CNC Control Renishaw TS-27R Probe Touch Probe Infrared OMP40 Assortment of Tooling Tool Magazine DT40/BT40 & ISO4 TC Arm Holder For ISO 40 Kinematicsopt (2) Compressed Air Through Spindle Compressed Ball 30 with Base Hem Rotary Tilting Table Hem Linear Glass Scales 500U Conveyor Lift Up Chip Movable Hand Wheel Manual Touch Cycles Heidenhain Manual Pilot Smart NC Heidenhain Manual DIN/ISO Programming Heidenhain

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162525444
New in: 2006

used

check Seller: MARC
Location: Land-fr

add to watchlist

Key data: 1015 mm, 510 mm, 675 mm

Machine Details Stock-No. 1105-03923 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1000 Pro Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin Switzerland Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1015 mm Y-Travel 508 mm Z-Travel 675 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 775 mm table-size 1020 x 620 mm max. table load 1000 kg spindle taper ISO 40 spindle turning speed range max. 14,000 rpm Feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 2.86 x 2.60 x 2.70 m Additional information MIKRON VCE 1000 PRO - 3-D Measuring butt ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162970689

used

check Seller: MARC
Location: Land-fr

add to watchlist

Key data: 600 mm, 450 mm, 450 mm

Machine Details Stock number 1105-03964 Machine Type Machining Center - Vertical Make MIKRON Type VCP 600 Year of construction 2000 CNC control type Control TNC 430M Storage location FRANCE Country of origin: SWITZERLAND Delivery time ready for shipment Cargo base EX WORK Price Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control TNC 430M Table clamping surface 850 x 530 mm Table load 0.40 t Number of T-slots 6 T-slots - spacing 63 mm T-slots - width 14H12 mm Spindle speeds - infinitely variable 100 - 20,000 rpm Spindle motor 12.00 kW Tool holder HSK-A63 Tool changing device 30 Tool diameter 90 mm Tool diameter with 2 free spaces 110 mm Tool length - max. 250 mm Tool weight max. 6.00 kg Chip-to-chip time approx. 7.00 sec Infinitely variable feed 0 - 22,000 mm/min Rapid traverse 22.00 m/min Feed force X/Y/Z axis 5000 N Total power ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 17.01.2024 add to watchlist
approved
dealer
item-No.: 163163771
New in: 2006

used

check Seller: MHS Werkzeugmaschinen
Location: 73479 Ellwangen Land-de

add to watchlist

Key data: 800 mm, 650 mm, 500 mm

3-Axis CNC Machining Center Mikron VCP 800W Duro Year of construction: 2006 Control: iTNC 530 x-travel: 800 mm Y-travel: 650 mm z-travel: 500 mm Spindle: SK 40 Speed: 12,000 rpm Table surface: 1,000 x 610 mm Tool changer: 24 x Space requirement: approx. 2.5×2.2×2.2 m

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 163534511

used

check Seller: MARC
Location: 67500 HAGUENAU Land-fr

add to watchlist

Key data: 1200 mm, 600 mm, 670 mm

Machine Details Stock-No. 1105-03992 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1200 Year of manufacture 2005 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Switzerland Delivery time immediately Freight base ex stock HAGUENAU FRANCE Technical details x-travel 1200 mm y-travel 600 mm Z-Travel 670 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 650 mm table-size 1220 X 620 mm max. table load 1500 kg spindle taper ISO 40 spindle turning speed range 10000 rpm feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 8 t dimensions of the machine approx. 3.250 X 3.240 X2.8 m Additional information - electrical hand wheel - Chip conveyor  ...

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5450125

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5450128

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5450138

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description Accessories available Technical data: Procedures Route x 500 mm Y way 500 mm Z way 380 mm Table size 350 x 800 mm Speed 50-2240 Rev/min Machine dimensions approx. 1.8 x 1.8 x 1.7 m Weight approx. 1650 kg

Category: 103 milling machines / CNC Milling Machines
Latest update: 20.03.2024 add to watchlist
approved
dealer
item-No.: 12764640
New in: 1987

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Category: 103 milling machines / Universal Tool-Milling Machines
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 135070342

used

check Seller: EnTeHa GmbH & Co.KG
Location: Land-de

add to watchlist

No. 4614: 1 used Universal milling machine make MIkRON, type WF 31 SA, with HEIDENHAIN TNC 114 work range: 560 x 500 x 400 m Accessories: rigid angle table SK 40 Coolant system Other: Speed range 40-4000 RPM Weight 2450 kg

Category: 103 milling machines / CNC Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794341

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

CNC milling machine make MIKRON type WF 21 CYear of construction 1986Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mm21 speeds continuously: 31.5 - 3150 rpm.Tool holder: ISO 40 M 16with insertion grooveQuill movement vertical: 90 mmFeed rate in all 3 axes: 2-3000 mm / minRapid traverse speed X- and Y-axis: 6000 mm / minRapid traverse speed Z-axis: 5000 mm / minelectrical connection power: 8.7 kWDimensions: 2900 x 2650 x 2000 mmWeight approx: 2300 kgWith- rigid angle table- CNC control Heidenhain TNC 155used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 103 milling machines / CNC Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794350

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Universal milling machine make MIKRON type WF 2/3 DPwith positioning and path control HEIDENHAIN TNC 121Year of construction 1981Longitudinal path X: 400 mmTransverse Y: 400 mmVertical path Z: 575 mmSpindle mount: ISA 4024 spindle speeds: 30 - 2240 rpm.Feed rates steplessly all directions: 1 - 750 mm / min.Rapid traverse in all directions: 1500 mm / min.Drive power: 6 kWWith- autom. Clamping- quill stroke- swiveling vertical milling head- rigid angle table 450 x 800 mm- Steering control HEIDENHAIN TNC 121- Manual mode, can be conventionalxa0xa0xa0 be worked with digital display- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mac ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
MIKRON 3rd category level
 
RESALE used machinery 25 years online