british flag
Resale Logo

Mikron WF used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information specialist for heavy duty machine tools and complete production lines  Walter Kames GmbH  http://www.kames.de 
banner logo
start page > keywords Mikron WF > results
425 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9
120164262 401

OZ TO 2 LITER PET up to 5.500 bph for sale
Complete PET Bottle Filling Line 5.500 bph


Complete PET Bottle Filling Line 5.500 bph This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bot ...
used machine
 
Complete PET Bottle Filling Line 5.500 bph

This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bottles cap PCO 28 mm. Frequent maintenance is still taking place (greasing and startup / test runs). It is completely installed and in excellent condition. Dry end of the line is being used for repacking purpose. Line has run 3 different bottle formats (biggest 2.0 liters). Spare parts (limited) are available, all documentation is available. The line is in good condition, installed and powered and can be tested.

Make: Various, see details
Built: 2006/2007 – Installed 2007
Capacity: Up to 5.500 BPH
Container handling: PET, 8 oz to 2.0 liters
Condition: Good
Running hours: 16500 hrs
Power / voltage: 460 V / 60 Hz

Equipment included:

- Bohm Pressure vessel – 900 liters – Type 2360
- Aquafine UV Desinfection unit
- Kaeser Air dryer + 40 bar air compressor – THP212 + CSDX 137, 3580 l/min, 75.0 kW
- Barter CO2 Filter – EBCO 1500
- Ingersoll Rand – 7Bar compressor
- 2x LMI Dosing pumps and meters
- Evapco Cooling tower – PMC-220E
- Membrafe Amoniak Membrame Cooling – RL500-3
- 2x Vilter Amoniak compressors – ZL46
- 1x Pentair Water filter
- Pumps & Filters (Various)
- Kosme preform hopper
- Kosme preform elevating conveyor PFA 1500, 0.37 kW, 50 Hz
- Kosme preform alignment infeed conveyor
- Kosme KSB 4L – Linear blow moulder – 4 heads, 68 kW, 50 Hz
- MTA Chiller for Kosme blow moulder, 6 bar, 11.6 kW, 220 V / 60 Hz
- Mesal Air conveyors, linear curves, 9 motors
- Mesal manual outfeed airconveyor to labeler (height adjustment)
- Trine wrap around labeler + Glue pump
- Mesal manual airconveyor infeed from labeler (height adjustment)
- Mesal mixer for CSD
- Amoniak cooler Mesal + Alfa Laval PHE (M10-BWFM, 10 bar, 34.89 L)
- Mesal rinser,filler,capper (Tribloc 30/30/10) – Manual infeed of caps
- Mesal bottle conveyors + SS conveyor belts
- Visial lightbox full bottle inspection (manual)
- Control panel for conveyors + filler Danfoss drives
- Vitz packers, mechanical wrap only packer for 12 packs + Heat tunnel, HT 74 DE
- Outfeed conveyor (manual palletizing)
- Optional = 2x SS sugar dissolving tanks
- Optional = 2x SS storage buffer tanks
2007
Price  
  FI   request
119949655 101

MIKRON WF 3 for sale
CNC Boring Mills


Machine data: y way 500 mm x way 500 mmz route 385 mm Spindle taper ISO 40 Spindle speeds 40-4000 1 / min Table size 800 x 450 mm Continuous feed 1-2000 mm / min Power 3.3 / 4.0 kW CNC HEIDENHAIN TNC 155 Tab ...

 

Machine data:

y way 500 mm
x way 500 mmz route 385 mm
Spindle taper ISO 40
Spindle speeds 40-4000 1 / min
Table size 800 x 450 mm
Continuous feed 1-2000 mm / min
Power 3.3 / 4.0 kW
CNC HEIDENHAIN TNC 155
Table load, kg: 144
Spindle stroke 90 mm
Coolant system
Voltage 380 V
Total capacity 8.7 kW
Machine weight approx. 1.8 tons
 
1,850 €  
  DE   request
119949624 103

HERMLE UWF 801 NC for sale
Toll milling machine


Control system: Heidenhain TNC 135 Travel distances: X: 500 mm Y: 430 mm Z: 400 mm Spindle taper: ISA 40 Spindle speed: 50-2500 rpm Engine power: 3.0 kW Machine dimensions: 2300 x 2300 x 1800 mm Machine ...
used machine
 
Control system: Heidenhain TNC 135
Travel distances:
X: 500 mm
Y: 430 mm
Z: 400 mm
Spindle taper: ISA 40
Spindle speed: 50-2500 rpm
Engine power: 3.0 kW
Machine dimensions: 2300 x 2300 x 1800 mm
Machine weight: 1100 kg
1983
Price  
  CZ   request
118774816 103

Heckler & Koch AM 442 for sale
Tool-Milling Machines


Toolroom milling machine Heckler & Koch AM442 Travels XYZ: 410x350x400mm Spindeltaper: Iso 40 Spindelspeeds: 63-2800 Tablesize: 850x225 With power feeds and rapids on all 3 axes Digital readout Fago ...

 
Toolroom milling machine Heckler & Koch AM442
Travels XYZ: 410x350x400mm
Spindeltaper: Iso 40
Spindelspeeds: 63-2800
Tablesize: 850x225
With power feeds and rapids on all 3 axes
Digital readout Fagor on 3 axes
YOM 1983
Angle table
Quill
Bellows are good or renewed
Including some toolholders
Including all documentation
The machine is cleaned and serviced
Identical to the Hermle UWF serie
 
6,750 €  
  NL   request
118580329 103

MIKRON WF 31 D - TNC 407 for sale
CNC Milling Machines


CNC milling machine Manufacturer: Micron Type: WF 31 D - TNC 407 Year of construction: 1991 Hours of operation: 13800 Control: CNC HEIDENHAIN TNC 407 Includes options for additional archiving with switching butto ...
used machine
 

CNC milling machine
Manufacturer: Micron
Type: WF 31 D - TNC 407
Year of construction: 1991
Hours of operation: 13800
Control: CNC HEIDENHAIN TNC 407
Includes options for additional archiving with switching button system Renishaw
Including switch Renishaw MA 2

Routes:
X - axis 560 mm
Y - axis 500 mm
Z - axis 400 mm

Speed range 40-4000 RPM
Table size 900 x 530 mm
Toolholder SK 40
Various tool holder included

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)

1991
Price  
  DE   request
118374912 708

GEA GRASSO GMBH Grasso FX VP 2800 / S - R717 for sale
Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition ...
used machine
 
Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW

Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type They have been operated only 15 000 hours, their cooling capacity is 2800 kW/unit. Refrigerant is R717 (NH3)

The delivery includes complete system with compressor package, evaporators, pumps, intermediate NH3 tanks, evaporative condenser and control cabinets.

The screw compressor sucks NH3 gas out of the liquid separator and compresses it up to condensation pressure. The refrigerant turns to liquid as it is cooled in the condenser. The liquid NH3 is injected back to the liquid separator via a high pressure float valve as expansion device. Inside the liquid separator liquid form and gas for are separated. The liquid NH3 passes in a gravity driven circuit to the evaporator. During the evaporation into gaseous form (with heat energy delivered by the secondary refrigerant) it evaporates and a mixture of gas and liquid is coming back to the liquid separator. Oil is injected into the working chamber of the screw compressor during operation and it is then separated again from the refrigerant in the discharge side oil separator. The oil which has heated up in the compressor is cooled in an oil cooler to reach the entry temperature and passes a fine filter.

This liquid chillers is equipped with a freely programmable standard logic controller PLC SIMATIC C7-633. All operating and fault signals as well as the process variables can be read from a LCD display with background lighting. The display is operated via a robust foil keyboard having 6 functions and 24 system keys.

Technical data:

Manufacturer: GEA Grasso GmbH
Manufacturing year: 2002
Number of units: 2 complete units
Type: Grasso FX VP 2008 / S
Cooling capacity: 2800 kW / unit
Electric motor: Schorch 560 kW / 2988 rpm / 50 Hz
Refrigerant: R 717 (Ammonia)
Evaporator: Alfa-Laval M20-MWFRC
Evaporative condenser: BAC XX
Compressor package EW: 13250 kg
2002
Price  
  FI   request
117194151 103

MIKRON WF 51C/150 for sale
CNC Universal Milling Machines


OVERVIEW: Brand: MIKRON Model: WF 51C/150 Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1983 Production hours: 45829 Location: Germany Origin country: Switz ...
used machine
 
OVERVIEW:
Brand: MIKRON
Model: WF 51C/150
Application type: Milling
Machine type: Milling Machine
Availability: Immediately
Construction year: 1983
Production hours: 45829
Location: Germany
Origin country: Switzerland

GENERAL DATA:
Measurements width: 2700 mm
Measurements depth: 2250 mm
Measurements height: 2330 mm
Machine weight: 3100 kg

MAIN DRIVE:
Number of spindle: 1
Spindle speed range: 3150 1/min
Spindle motor power: 8 kW
Spindle bore: 110 mm
Tool taper: ISO 40/M16

CONTROL UNIT:
Brand: Heidenhain
Model: TNC 150

MOVEMENT:
X-AXIS:
Movement: 800 mm
Working feed: 3000 mm/min
Rapid traverse: 6000 mm/min

Y-AXIS:
Movement: 500 mm
Working feed: 3000 mm/min
Rapid traverse: 6000 mm/min

Z-AXIS:
Movement: 460 mm
Working feed: 3000 mm/min
Rapid traverse: 4000 mm/min

WORKPIECE:
Workpiece weight: 500 kg

MEDIA:
Main electronic connection: 380V / 50Hz
Power consumption: 17.5 kVA
Lubrication tank: 100 L

ADDITIONAL EQUIPMENT:
1 - Holders
1983
Price  
  DE   request
117194070 103

MIKRON UMS 900 for sale
CNC Universal Milling Machines


MICRON universal milling machine mod to the 900 / BJ. 96 / xyz: 900-630-500 / cnc HEIDENHAIN TNC 426 / magazine 22 seats (12 for HSK 40-10 for SK40 / spindle 1 SK40: 6,300 RPM / spindle 2 Fischer: high frequency spindle  ...
used machine
 
MICRON universal milling machine mod to the 900 / BJ. 96 / xyz: 900-630-500 / cnc HEIDENHAIN TNC 426 / magazine 22 seats (12 for HSK 40-10 for SK40 / spindle 1 SK40: 6,300 RPM / spindle 2 Fischer: high frequency spindle HSK40 - 42,000 rpm / automatic / table 1200) x 600 / hour: 62,000 / full accessories / good condition fe.gi.maschinen.sbg.at

MICRON universal milling machine mod to the 900 / year 96 / xyz: 900-630-500 / cnc HEIDENHAIN TNC 426 / magazine 22 seats (12 for HSK 40-10 for SK40 / 1 SK40 spindle: 6,300 rpm / spindle 2 Fischer: high frequency spindle HSK40 - 42,000 rpm / automatic / table 1200 x 600 / hours) : 62,000 / full accessories / good condition
Fe.gi.Maschinen.SBG.at
1996
Price  
  AT   request
116581513 101

MIKRON VCP 1000 MIKRON VCP 1000 for sale
Numerically Controlled Machining Centres


CNC machining center MICRON VCP 1000 1997 Reference No. 05562 Numerical control HEIDENHAIN TNC 426 PB Technical data: -X axis 1000 mm -Y-axle 750 mm -Z axis 750 mm -Rapid traverse / working feed X, Y, Z 30 m /  ...

 
CNC machining center
MICRON
VCP 1000
1997
Reference No. 05562
Numerical control HEIDENHAIN TNC 426 PB
Technical data:
-X axis 1000 mm
-Y-axle 750 mm
-Z axis 750 mm
-Rapid traverse / working feed X, Y, Z 30 m / min.
-Working power 20 kW
-Tool holder SK 40
-Maximum tool weight 8 kg
-Max tool diameter 80 mm
-Clamping surface 1,150 x 700 mm
-Maximum work piece weight 1000 kg
 
6,500 €  
  DE   request
116236694 112

WMW ZWF 15 WMW ZWF 15 for sale
Gear Hobbing Machines


Gear rolling machine WMW ZWF 15 Max engine: 15 Max machining: 1500mm Year of construction: 1968 good condition with tools the machine is complete with many tools 1 holder 2. suitable for it's for Ihnenverzahnung  ...

 
Gear rolling machine WMW ZWF 15
Max engine: 15
Max machining: 1500mm
Year of construction: 1968
good condition with tools
the machine is complete with many tools
1 holder
2. suitable for it's for Ihnenverzahnung
3. tailstock is
 
9,500 €  
  DE   request
116231889 103

MIKRON UMS 900 TNC 426 for sale
Tool-Milling Machines


Tool room milling machine manufacturer: Micron Type: to the 900 TNC 426 Year of construction: 1996 Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, inform ...
used machine
 
Tool room milling machine manufacturer: Micron
Type: to the 900 TNC 426
Year of construction: 1996

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
1996
Price  
  DE   request
116228480 103

MIKRON WF72C / TNC for sale
Universal Milling Machines


Universal milling machine manufacturer: Micron Type: WF72C/TNC Year of construction: 1992 Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information an ...
used machine
 
Universal milling machine manufacturer: Micron
Type: WF72C/TNC
Year of construction: 1992

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
1992
Price  
  DE   request
113228899 103

MIKRON WF 72 CH for sale
CNC Milling Machines


CNC railway control HEIDENHAIN TNC 155 with V 24 interface CNC rotary table 4 axle diameter: 800 mm. Traverse paths: X = 900, 630 = Y, Z = 500 mm. Hydraulic tool clamping. Horizontal Milling spindle Spindle retainer ...
used machine
 
CNC railway control HEIDENHAIN TNC 155 with V 24 interface
CNC rotary table 4 axle diameter: 800 mm.
Traverse paths: X = 900, 630 = Y, Z = 500 mm.
Hydraulic tool clamping.
Horizontal Milling spindle
Spindle retainer: SK 40
Spindle speed: 15-4000 RPM.
Iniversal Swivel Head with boring Quill,
Chip conveyors, Electr. Handwheel,
Cooling plant, full cabin, and documentation.
Weight: approx. 4000 kg.
Good ready condition.
The machine can be seen under power.
1990
Price  
  DE   request
109244955 103

MIKRON WF2/3DP for sale
Universal Tool-Milling Machines


Hello sell a fully functional Micron WF2/3DP universal milling machine. Like, the machine can be seen and tried.

 
Hello
sell a fully functional Micron WF2/3DP universal milling machine.
Like, the machine can be seen and tried.
 
7,750 €  
  DE   request
109244884 103  

HERMLE UWF 1002 H for sale
CNC Milling Machines


CNC milling machine manufacturer: Hermle Type: UWF 1002 H Year of construction: 1994 Control: HEIDENHAIN TNC 426 Traverse paths: X/Y/Z 700 x 630 x 500 mm = Speed range: 20-4,200 RPM Spindle taper: ISO 40 Tool ch ...
used machine
 
CNC milling machine manufacturer: Hermle
Type: UWF 1002 H
Year of construction: 1994
Control: HEIDENHAIN TNC 426

Traverse paths: X/Y/Z 700 x 630 x 500 mm =
Speed range: 20-4,200 RPM
Spindle taper: ISO 40
Tool changer: HTC34
Table: 1000 x 490 mm
Weight: 6,500 kg
1994
Price  
  DE   request
108973499 101

MIKRON UCP 1000 for sale
Numerically Controlled Machining Centres


Machining center - universal MIKRON UCP 1000 Nr. 1105-02090 make MICRON type UCP 1000 year 2000 State second-hand machine control CNC storage France country of origin Switzerland delivery time upon request of freight bas ...
used machine
 
Machining center - universal MIKRON UCP 1000 Nr. 1105-02090 make MICRON type UCP 1000 year 2000 State second-hand machine control CNC storage France country of origin Switzerland delivery time upon request of freight base from site technical details x way 1000 mm y-way 1000 mm z route 875 mm feeds 15000 mm / min speed 30000 mm / min drive 24 kW spindle speeds 15000 rpm pallet size 800 slide mm table indexing B-axis 360000° ° head H/V SWIVELING
Tool magazine positions 30 fold tool diameter 90/130 mm tool length of Max 250 mm overall power 32 kW machine weight approx. 10 t description 5 pages UNIVERSAL machining centre MIKRON UCP 1000
Built in 2000
HEIDENHAIN TNC 426
1-axis NC-Drehktisch;
Travel 1000 x 800 x 10000 mm;
TABLE size DIA 800 MM 360000°
Spindle retainer for SK 40
Spindle drive power kW 18/24;
Spindle speeds up to 15,000 rpm;
30-Fach tool magazine.

THEM COOLING 40 BARS
M & H touch probe;
Chip conveyors;
NEW SPINDLE 1500 HOUR SPINDLE TOTAL RUN HOURS 8500



2000
75,000 €  
  FR   request
108497016 1300

WT WICKELTECHNIK WFZ 80.130 for sale
Slitter Rewinder


Working width: 500-1300mm, working speed: 450m/min, material thickness: 100-400µm, diameter original roll/finished roll: 1250/810mm, weight original roll/finished roll: 2200/850kg, cutting width: 65mm min., total connec ...
used machine
 
Working width: 500-1300mm, working speed: 450m/min, material thickness: 100-400µm, diameter original roll/finished roll: 1250/810mm, weight original roll/finished roll: 2200/850kg, cutting width: 65mm min., total connected load: 110kVA, accessories: 10 top knife holders. Capacity: 450 m/min
2000
Price  
  DE   request
107518049 103

MIKRON WF-71 D for sale
CNC Milling Centers


OVERVIEW: Brand: Mikron Model: WF-71 D Application type: Milling Machine type: Machining Center Construction year: 1992 Location: Germany GENERAL DATA: Measurements width: 3304 mm Measurements depth: 2456 mm  ...
used machine
 
OVERVIEW:
Brand: Mikron
Model: WF-71 D
Application type: Milling
Machine type: Machining Center
Construction year: 1992
Location: Germany

GENERAL DATA:
Measurements width: 3304 mm
Measurements depth: 2456 mm
Measurements height: 1990 mm
Machine weight: 3500 kg

MAIN DRIVE:
Number of spindle: 1
Spindle speed range: 40 - 4000 1/min
Spindle motor power: 6 kW
Tool taper: SK40

CONTROL UNIT:
Brand: Heidenhain
Model: TNC 415

MOVEMENT:
X-AXIS:
Movement: 900 mm
Working feed: 2-3000 mm/min
Rapid traverse: 6 m/min
Backlash: 0.05

Y-AXIS:
Movement: 500 mm
Working feed: 2-3000 mm/min
Rapid traverse: 6 m/min
Backlash: 0.03

Z-AXIS:
Movement: 500 mm
Working feed: 2-3000 mm/min
Rapid traverse: 4 m/min

WORKPIECE:
Workpiece weight: 500 kg

TABLE:
Outer length: 1000 mm
Outer width: 500 mm
Number of T-Slots: 7

TOOLS:
Slots in storage: 12
Max weight: 6 kg
Max tool diameter: 80 mm
Max tool length: 200 mm

MEDIA:
Main electronic connection: 3 x 380 V / 50 Hz
Power consumption: 15.4 kVA
1992
Price  
  DE   request
107365607 102

WFL MILLTURN M 150 for sale
CNC Turning Centers


OVERVIEW: Brand: WFL Millturn Model: M 150 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2002 Production hours: 27537 Spindle hours: 9586 Location: Spain Origin coun ...
used machine
 
OVERVIEW:
Brand: WFL Millturn
Model: M 150
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 2002
Production hours: 27537
Spindle hours: 9586
Location: Spain
Origin country: Austria

GENERAL DATA:
Measurements width: 16296 mm
Measurements depth: 6052 mm
Measurements height: 4650 mm
Machine weight: 55200 kg

MAIN DRIVE:
Spindle speed range: 3200 1/min
Spindle motor power: 55 kW

CONTROL UNIT:
Brand: Siemens
Model: Sinumerik 840 D

MOVEMENT:
X-AXIS:
Movement: 1120 mm
Feed force: 31500 N
Rapid traverse: 15 m/min

Y-AXIS:
Movement: 650 mm
Feed force: 25000 N
Rapid traverse: 12.5 m/min

Z-AXIS:
Movement: 6870 mm
Feed force: 30000 N
Rapid traverse: 15 m/min

WORKPIECE:
Workpiece drm over bed: 1500 mm
Workpiece drm over support: 1360 mm
Workpiece drm: 1500 mm
Workpiece weight: 9000 kg

TAIL STOCK:
Pinol diameter: 240 mm
Pinol force: 47500 N
Pinol way: 300 mm
Pinol tool taper: ME 80 (DIN 228)

TOOLS:
Slots in storage: 60
Max weight: 25 kg
Max tool diameter: 160 mm
Max tool length: 800 mm

MEDIA:
Air pressure: 6 bar
Oil tank: 140 L
Oil pressure: 70 bar

ADDITIONAL EQUIPMENT:
1 - Complete 12x Toolset
2002
Price  
  ES   request
107365551 103

MIKRON UCP 600 Vario for sale
CNC Milling Centers


Mikron UCP 600 Vario Year of construction: 2008 Control: HEIDENHAIN of iTNC 530 duty hours: 75.812 h Spindle hours: 22: 034 h Traverse paths x stroke: 600 mm Y travel: 450 mm Z travel: 450 mm maximum spindle s ...
used machine
 
Mikron UCP 600 Vario
Year of construction: 2008
Control: HEIDENHAIN of iTNC 530 duty hours: 75.812 h
Spindle hours: 22: 034 h

Traverse paths x stroke: 600 mm
Y travel: 450 mm
Z travel: 450 mm

maximum spindle speed (40% ED, S6): 20'000 U / min, spindle taper: HSK-A63
Tool Magazine: 120 places (external magazine)

B - axis:-/ + 115 / 30 degrees C - axis: 0,001Grad Max.Tischlast: 90 kg

additional features - chip conveyor
-MH laser surveying type 32.00 HDR
-Erowa range system with zero voltage - 7 PCs. Erowa palette 400 x 400 mm - extensive set of tool holder HSK 63! no internal Coolant!

Technically the the machine is tested before delivery and any defective components will be replaced.

A demonstration of power is after completion of the revision and after consultation
possible in our demonstration centre Werlte
2008
Price  
  DE   request
107365521 107

INDUMASCH IS 25/500 for sale
Punching Machines


They offer here on a super functional punching machine, the noble brand Indumasch which is 1 A natural high. Machine is in TOP condition and fully functional. Technical data: 83wzkgzwf Brand: Indumasch Type: IS ...
used machine
 
They offer here on a super functional punching machine, the noble brand Indumasch which is 1 A natural high. Machine is in TOP condition and fully functional.

Technical data:
83wzkgzwf

Brand: Indumasch

Type: IS 25/500
Cutting force 25 t
maximum sheet thickness 6 mm
maximum punch diameter 90 mm
Strokes per minute 200
Throat depth 410 mm
Workspace 500 x 500 mm
 
3,445 €  
  DE   request
107284472 101

WMW UNION BFKP for sale
Boring Mills


WMW UNION type: BFKP BJ. obsolete 1983/2012 Control: SIEMENS 840 d 6-axis Spindle hours after overhaul: 2548 h more data see annex AWF-map
used machine
 
WMW UNION type: BFKP
BJ. obsolete 1983/2012
Control: SIEMENS 840 d 6-axis
Spindle hours after overhaul: 2548 h
more data see annex AWF-map
2012
Price  
  DE   request
107284455 1300

HÄNDLE WF 880a for sale
Fine Roller Crusher 800 mm x 800 mm


Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extr ...

 
Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment.
In regularly maintained condition, rollers without ridges.

Available at extra charge: Suitable dust filter by Hellmich.
 
Price  
  DE   request
107219638 105

KALTENBACH VMB 360 for sale
Band Saw Automatics


Blade: 3830 x 27 x 0.9 mm Belt speed: 20-90 m / min, infinitely variable by means of Variator Bevel cuts: saw arm swivel from 90 ° to 30 ° (for automatic operation) Workspace: At 90 ° round material D. 305 mm / sq ...
used machine
 
Blade: 3830 x 27 x 0.9 mm
Belt speed: 20-90 m / min, infinitely variable by means of Variator
Bevel cuts: saw arm swivel from 90 ° to 30 ° (for automatic operation)
Workspace:
At 90 ° round material D. 305 mm / square flat 360x305mm
At 60 ° round material D. 305 mm / square flat 330x305mm
At 45 ° round material D. 265 mm / square flat 265x300mm 30 round material D. 175 mm / square flat 175x300mm

Section length: min 10 mm
Simple stroke: 510 mm
Multiple stroke: Max 4590 mm

Machine weight: 1380 kg
Dimensions Lxwxh: 2200x2300x1650mm
Working height: 700 mm

Main features:
-Machine frame and 5° of inclined column guided Sawframe in torsion-free all-steel construction
-Tungsten carbide-tipped Sägebanführungen
-Easily accessible chip tray
-Electric coolant pump
-Minimum speed monitoring
-Stepless cutting speed control
-Cutting pressure pre-selection and control system
-Electrically controlled blade tension
-Powered chip brush
-Floating bearing material supply car Office suitable for odd Rod material
-Automated material replenishment up to 4590 mm
-Two hydraulic frame chucks, as a double clamping stock unit acting
-Maschinenrollgang in the supply unit, stable table support in the cutting area
-Section length adjustment by Handwheel and display
-Multiple supply controls with selector switch for multiple hub
-Piece counter with automatic switch-off.
-Fully automatic procedure
1995
Price  
  CH   request
107183222 103

MIKRON WF 74 VH for sale
CNC Milling Machines


CNC universal tool milling machine 5 sides machining possible HEIDENHAIN CNC railway control system TNC 426 40 x tool changer, horizontal and vertical CNC rotary table, diameter 900 mm (4.Achse) Automatic Swivel Hea ...
used machine
 
CNC universal tool milling machine
5 sides machining possible
HEIDENHAIN CNC railway control system TNC 426
40 x tool changer, horizontal and vertical
CNC rotary table, diameter 900 mm (4.Achse)
Automatic Swivel Head, horizontal and vertical
RENICHAW 3 D radio probes.
Traverse paths: X = 900, 630 = Y, Z = 500 mm.
Spindle retainer: SK 40
Spindle speed: 30-6300 RPM.
Electr. Handwheel, horizontal Milling spindle,
Full cabin, chip conveyor, and documentation.
ABM. W x D x H: approx. 2500 x 3900 x 2800 mm.
Weight: approx. 8000 kg.
The machine may be viewed under power and presented.
Good ready condition.
1995
Price  
  DE   request
107183218 103

MIKRON WF 32 C for sale
CNC Milling Machines


CNC universal tool milling machine HEIDENHAIN CNC railway control system TNC 426 22 x tool changer with double gripper HEIDENHAIN 3D wireless probe Traverse paths: X = 600, 600 = Y, Z = 450 mm. Spindle retainer: SK  ...
used machine
 
CNC universal tool milling machine
HEIDENHAIN CNC railway control system TNC 426
22 x tool changer with double gripper
HEIDENHAIN 3D wireless probe
Traverse paths: X = 600, 600 = Y, Z = 450 mm.
Spindle retainer: SK 40
Spindle speed: 40-6300 RPM.
Universal Swivel Head with boring Quill,
: Angle table clamping surface 900 x 530 mm.
Electr. Handwheel, coolant system,
Full cabin and documentation.
ABM. W x D x H: approx. 2200 x 2800 x 2200 mm
Weight: ca, 3800 kg.
The machine may be viewed under power and presented.
Good ready condition.
1992
Price  
  DE   request
107183158 103

MIKRON WF 40C for sale
CNC Milling Machine


X-travel: 620mm, y-travel: 620mm, z-travel: 520mm, rotational speed: 0-3150/min, feed rate: 1-3150mm/U, rapid traverse x- and y-travel: 6m/min, rapid traverse z-travel: 4m/min, table size: 400x800mm, number of T-bolts: 4 ...
used machine
 
X-travel: 620mm, y-travel: 620mm, z-travel: 520mm, rotational speed: 0-3150/min, feed rate: 1-3150mm/U, rapid traverse x- and y-travel: 6m/min, rapid traverse z-travel: 4m/min, table size: 400x800mm, number of T-bolts: 4, distance T-bolts: 90mm, T-bolt width: 18mm, quill stroke: 90mm, connected load: 6/8kW, length: 2100mm, width: 1700mm, height: 2100mm, weight: 3.5t.
 
Price  
  DE   request
107096632 402

ROMMELAG 3012 for sale
Blow-Fill-Seal Machine


Rommelag 3012 Blow Fill Seal technology. 10 cavity machine. Suitable for SVP fill sizes from 0.1 ml – 50ml. Capacity 3500 vials/ampoules per hour based on 0.5ml - 10 cavity. Supplied with one set of 5ml moulds. Complet ...
used machine
 
Rommelag 3012 Blow Fill Seal technology. 10 cavity machine. Suitable for SVP fill sizes from 0.1 ml – 50ml. Capacity 3500 vials/ampoules per hour based on 0.5ml - 10 cavity. Supplied with one set of 5ml moulds. Complete and fully working when taken out of production. This machine was fully reconditioned by Rommelag recently. Upgraded Yokogawa HMI – Siemens Op 393 .11 PLC. All new electrical wiring. Hydraulic pack overhauled. All hydraulic and pneumatic valves replaced. All new stainless steel panels.
Ideal for WFI (Water For Injection), eye wash solution, respules, eye or ear drops. BFS/FFS technology offers the huge benefit of enabling the entire process, which includes manufacturing a container, filling it with the product and then sealing it, to be completed in one short cycle using only one machine. Firstly, the sterile pyrogen-free bottles or ampoules are blow moulded from extruded PE or PP in water-cooled moulds. Immediately afterwards, the containers are filled with the sterile product in aseptic conditions and then hermetically sealed. Machine size: 2560mm x 1500mm x 2250mm high, approx. weight 4000kg This machine is in excellent condition. Link to factory spec: http://pdf.directindustry.com/pdf/rommelag/bottelpack-type-3012m/60447-184149.html
1991
260,000 GBP  
  UK   request
107070490 101

MIKRON VCP 600 for sale
Vertical Numerically Controlled Machining Centres


MICRON BAZ vertical mod. VCP 600 / 99 / xyz: 600-450-450 / 850 x 530 table cnc HEIDENHAIN iTNC 426 / Magazine 30 places / iso 40 / 10,000 rpm / Y axis: KGT / blowing air at spindle / hours: spindle 5,900 / Accessories: 6 ...
used machine
 
MICRON BAZ vertical mod. VCP 600 / 99 / xyz: 600-450-450 / 850 x 530 table cnc HEIDENHAIN iTNC 426 / Magazine 30 places / iso 40 / 10,000 rpm / Y axis: KGT / blowing air at spindle / hours: spindle 5,900 / Accessories: 60 tools / good condition fe.gi.maschinen.sbg.at

MIKRON vertical machining center mod VCP 600 / year 99 / xyz: 600-450-450 / table 850 x 530 / cnc HEIDENHAIN iTNC 426 / magazine 30 tools / iso 40 / 10,000 rpm / Y axis: KGT / blown air at spindle / hours: 5,900 / accessories spindle: 60 tools / good condition
Fe.gi.Maschinen.SBG.at
1999
Price  
  AT   request
106845726 103

HERMLE UWF 1001 H for sale
Tool-Milling Machines


Universal - Werkzeugfräs - and boring machine Manufacturer: Hermle Type: UWF 1001 H Year of construction: 1994 Control: HEIDENHAIN TNC 426 Traverse paths: X/Y/Z 700 x 550 x 500 mm Table clamping surface: 1000 x  ...
used machine
 
Universal - Werkzeugfräs - and boring machine
Manufacturer: Hermle
Type: UWF 1001 H
Year of construction: 1994
Control: HEIDENHAIN TNC 426

Traverse paths: X/Y/Z 700 x 550 x 500 mm
Table clamping surface: 1000 x 500 mm
Tool changers: 32 items
Tool holder: SK 40
Probe
HPC spindle with 36,000 rpm
Spindle newly stored
Weight: approx. 4,750 kg
1994
Price  
  DE   request
106827654 101

DEFUM WFB 80 for sale
Drilling and Milling Machine


Spindle diameter: 80mm, spindle type: ISA 40, feed rate: 350-700mm, vertical feed: 1000mm, turning diameter: 450mm max., rotational speed gear/ v-belt drive: 5.6-800/min/ 250-1400/min, disc diameter: 480mm, plane diamete ...
used machine
 
Spindle diameter: 80mm, spindle type: ISA 40, feed rate: 350-700mm, vertical feed: 1000mm, turning diameter: 450mm max., rotational speed gear/ v-belt drive: 5.6-800/min/ 250-1400/min, disc diameter: 480mm, plane diameter: 700mm, slider feed rate: 150mm, spindle feed rate: 0.03-12mm/U, table size: 1100x1050mm, table load: 1.8t max., length: 5060mm, width: 2815mm, height: 2895mm, weight: 10.03t.
 
Price  
  DE   request
106431149 101

MIKRON UCP 600 Vario for sale
Numerically Controlled Machining Centres


Machining Center 5 axes Manufacturer: Micron Type: UCP 600 Vario Year of construction: 2004 Control: HEIDENHAIN iTNC 530 Axis: 5 Procedures: X: 600 Y: 450 Z: 450 Tools: 36 HSK 40 Speed: 42.000U/min Weight a ...
used machine
 
Machining Center 5 axes

Manufacturer: Micron
Type: UCP 600 Vario
Year of construction: 2004
Control: HEIDENHAIN iTNC 530
Axis: 5
Procedures:
X: 600
Y: 450
Z: 450
Tools: 36 HSK 40
Speed: 42.000U/min
Weight approx.: 7,700 kg

Facilities

-Probe
-Minimum quantity lubrication
-Conveyors
-Pallet Dynafix, 280 x 280mm

Errors excepted
2004
Price  
  DE   request
105318120 103

GACK DEM NC 3TT/WF 625 for sale
Facing and Centering machine, CNC


Facing and Centering machine GACK DEM NC 3TT/WF 625 -Make-Ludwig GACK GmbH, Muehlacker, Germany -Type- DEM NC 3TT/WF 625 Spezial -Year of manafacture- 1983 -Type of control- CNC Sinumerik 3TT -workpiece diameter-ma ...

 
Facing and Centering machine GACK DEM NC 3TT/WF 625
-Make-Ludwig GACK GmbH, Muehlacker, Germany
-Type- DEM NC 3TT/WF 625 Spezial
-Year of manafacture- 1983
-Type of control- CNC Sinumerik 3TT
-workpiece diameter-max.500 mm, min 120 mm;
-workpiece length -max.2440 mm, min 800 mm;
-spindle - 50-1000 U/min;
-feed speed -5-1000 mm/min;
-two facing spindles
-two carousel tool magazine, 24 tools each
-total power requirement - 100 kW;
-weight of the machine- 31 t.
Used short time for pipe finishing.
Dismantled in proper way.
 
Price  
  AG   request
104962347 101

MIKRON VCP 800 for sale
Vertical Numerically Controlled Machining Centres


MICRON BAZ vertical mod. VCP 800 / 2000 / xyz: table 1050 x 590, 800-450-450 / magazine / cnc HEIDENHAIN 426 30 places / iso 40 / 12,000 rpm / table load 400 kg / conveyors / accessories / good condition fe.gi.maschinen. ...
used machine
 
MICRON BAZ vertical mod. VCP 800 / 2000 / xyz: table 1050 x 590, 800-450-450 / magazine / cnc HEIDENHAIN 426 30 places / iso 40 / 12,000 rpm / table load 400 kg / conveyors / accessories / good condition fe.gi.maschinen.sbg.at

MIKRON vertical machining center mod VCP 800 / year 2000 / xyz: 800-450-450 / table 1050 x 590 / cnc HEIDENHAIN 426 / magazine 30 places / iso 40 / 12,000 rpm. / table load 400 kg / chip conveyor / accessories / good condition
Fe.gi.Maschinen.SBG.at
2000
Price  
  AT   request
104812915 101

MIKRON VCP 1000 for sale
Numerically Controlled Machining Centres


Machining center - universal MICRON VCP 1000 bearing no 1105-02267 make MICRON type VCP 1000 year 1999 State second-hand machine control CNC storage France country of origin Switzerland delivery immediately cargo base fr ...
used machine
 
Machining center - universal MICRON VCP 1000 bearing no 1105-02267 make MICRON type VCP 1000 year 1999 State second-hand machine control CNC storage France country of origin Switzerland delivery immediately cargo base from site technical details x way 1000 mm y-way 750 mm z-way 750 mm of spindle cone SK 40 ISO speed range 12000 RPM spindle motor 20 kW rapid traverse 30 m / min table burden 800 kp number of places in the tool changer 30 kW total power requirement 39 machine weight approximately 10 t accessories chip conveyor description

SPINDLE 12000 RPM HEINDENHAIN TNC 426 NOW FREE
SPAENEFOERDERER
1998
34,000 €  
  FR   request
103970817 101

MIKRON HAAS VCE 750 VF 2 for sale
Numerically Controlled Machining Centres


Machining center - vertical MICRON HAAS VF 2 make MICRON HAAS type VCE 750 year 1995 State second-hand machine control CNC Haas storage location stock HAGUENAU Country of origin Switzerland delivery immediately cargo ba ...
used machine
 
Machining center - vertical MICRON HAAS VF 2 make MICRON HAAS type VCE 750 year 1995 State second-hand machine control CNC Haas storage location stock HAGUENAU
Country of origin Switzerland delivery immediately cargo base stock technical details x way 750 mm y route 410 mm z trail 500 mm control Haas tool changer 20 Chuck SK40 speed 50-7,500 rpm table size 910 x 310 mm overall power demand kW machine weight 4 tons of space approximately 2.4 x 2.4 x 2.7 m description machining centres MIKRON-Haas VCE 750
good condition,


1997
19,000 €  
  FR   request
103062598 101

MIKRON HAAS VCE 550 for sale
Numerically Controlled Machining Centres


Machining center - vertical MICRON HAAS VCE 550 bearing no 1105-02264 make MICRON HAAS type VCE 550 year 1999 State second-hand machine control CNC HAAS storage warehouse location country of origin USA delivery immediate ...
used machine
 
Machining center - vertical MICRON HAAS VCE 550 bearing no 1105-02264 make MICRON HAAS type VCE 550 year 1999 State second-hand machine control CNC HAAS storage warehouse location country of origin USA delivery immediately cargo base stock, free loaded trucks further details on request technical details x way 550 mm y route 406 mm z route 508 mm table size 620 x 460 mm spindle retainer for SK 40 max spindle speed max. 7500 Rev/min rapid traverse 20 m / min control HAAS tool changer 20 POS.
Table load 500 kg spindle motor 7.5 kW total power consumption 15 kW machine weight approx. 3.5 t dimensions L x W x H 2.55 x 2.1 x 2.52 m description Accessories: electron. Handwheel, coolant
Setup
WITH DIVIDING HEAD 4 AXIS HAAS
1999
18,000 €  
  FR   request
103062596 101

HAAS MIKRON VF 1 for sale
Numerically Controlled Machining Centres


Machining center - vertical HAAS VF 1 no 1105-02263 make HAAS type VF 1 built in 1996 State second-hand machine control CNC HAAS storage warehouse location country of origin USA delivery immediately cargo base stock, fr ...
used machine
 
Machining center - vertical HAAS VF 1 no 1105-02263 make HAAS type VF 1 built in 1996 State second-hand machine control CNC HAAS storage warehouse location country of origin USA delivery immediately cargo base stock, free loaded trucks further details on request technical details x way 508 mm y route 406 mm z-way 508 mm table size 620 x 460 mm spindle retainer for SK 40 max spindle speed max. 7500 Rev/min rapid traverse 20 m / min control HAAS tool changer 20 POS.
Table load 500 kg spindle motor 7.5 kW total power consumption 15 kW machine weight approx. 3.5 t dimensions L x W x H 2.55 x 2.1 x 2.52 m description Accessories: electron. Handwheel, coolant
Setup
1995
12,500 €  
  FR   request
101867637 101

MIKRON WF 71 D for sale
Numerically Controlled Machining Centres


Workspace in X: 900 mm Workspace in Y: 500 mm Workspace in Z: 500 mm Table size: 1000 x 500 mm Speed range: 40-4000 RPM Spindle taper: ISO 40 Spindelantriebslstg.: 4,5 / 6,0 KW Total power consumption: approx. 7.5 ...
used machine
 
Workspace in X: 900 mm
Workspace in Y: 500 mm
Workspace in Z: 500 mm
Table size: 1000 x 500 mm
Speed range: 40-4000 RPM
Spindle taper: ISO 40
Spindelantriebslstg.: 4,5 / 6,0 KW
Total power consumption: approx. 7.5 KW / 380 Volt
Machine weight: 3500 kg

Equipment / Accessories:

CNC railway control HEIDENHAIN TNC 407
18 Pocket tool changer
Machine lamp
Coolant system
2-stage motor

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before making a purchase in advance at our plant under power.
1992
9,800 €  
  DE   request
101711784 103

MIKRON WF 41C for sale
CNC Milling Machine


X-travel: 630mm, y-travel: 500mm, z-travel: 460mm, table size: 1000x500mm, rotational speed: 31.5-3150/min, spindle power: 14kW, quill stroke: 45mm, feed rate: 1-3000mm/min, rapid traverse: x-, y-travel: 6m/min, rapid tr ...
used machine
 
X-travel: 630mm, y-travel: 500mm, z-travel: 460mm, table size: 1000x500mm, rotational speed: 31.5-3150/min, spindle power: 14kW, quill stroke: 45mm, feed rate: 1-3000mm/min, rapid traverse: x-, y-travel: 6m/min, rapid traverse z-travel: 4m/min, voltage: 380V, control: Heidenhain TNC 150Q, length: 1800mm, width: 2600mm, height: 2020mm, weight: 3.1t.
1981
Price  
  DE   request
100857230 112

MIKRON 102.05 MPS for sale
Gear Hobbing Machines


Gear hobber MIKRON 102 . 05 MPS: -Hobbing length 130 mm, -Max. wheel diameter 120 mm, -Gear width 130 mm, -No. of teeth to be hobbed 6 - 325 Z, -max. module 2, -Pitch angle of spirals (left or right hand): 0 -  ...

 
Gear hobber MIKRON 102 . 05 MPS:


-Hobbing length 130 mm,
-Max. wheel diameter 120 mm,
-Gear width 130 mm,
-No. of teeth to be hobbed 6 - 325 Z,
-max. module 2,
-Pitch angle of spirals (left or right hand): 0 - 90°,
-Number of teeth to be hobbed: 6-399 (with gear ratio 80:5),
-Main motor power: 1.1 kW,
-Connected load: 3 x 380 VAC,
-Frequency: 50 Hz.

Dimensions: L/W/H: 1030/800/1520 mm
Weight: 880 kg


This machine hasen’t been re-painted or damaged, it is in its entire origin condition (wich is the normal iron grey apparent casting).

A very big amount of the MIKRON original tooling is included with the machine (wheels, accessories...). All is present in the photos.


Complete original documentation and electrical schematics are present.


Machine in EXCELLENT condition, visible under power for trial.

Price on demand VAT excluded, EXworks loading included Saint Béron (73520, Saint Béron FR).

More details or questions on request.
 
Price  
  FR   request
98066507 101

MIKRON VCP 600 for sale
Vertical Numerically Controlled Machining Centres


MICRON BAZ vertical mod. VCP 600 / 2000 / xyz: 600-450-450 / cnc HEIDENHAIN model 430 / 18,000 rpm / Magazine 30 / 12 kW / HSK 63 / good condition fe.gi.maschinen.sbg.at MIKRON vertical machining center mod VCP 600 /  ...
used machine
 
MICRON BAZ vertical mod. VCP 600 / 2000 / xyz: 600-450-450 / cnc HEIDENHAIN model 430 / 18,000 rpm / Magazine 30 / 12 kW / HSK 63 / good condition fe.gi.maschinen.sbg.at

MIKRON vertical machining center mod VCP 600 / year 2000 / xyz: 600-450-450 / cnc HEIDENHAIN model 430 / 18,000 rpm spindle. / magazine 30 / 40 SK / HSK 63 / 12 KW / good condition
Fe.gi.Maschinen.SBG.at
2000
Price  
  AT   request
96039292 103

MIKRON WF 3 for sale
CNC Milling Machines


MIKRON milling machine mod WF 3 / 87 / xyz: 500-500-400 / table 600 x 400 / 40 SK / 3150 RPM / cnc HEIDENHAIN / machine 2009 an overhaul: new drive motors - guides checked and adjusted / round table / probe / accessories ...
used machine
 
MIKRON milling machine mod WF 3 / 87 / xyz: 500-500-400 / table 600 x 400 / 40 SK / 3150 RPM / cnc HEIDENHAIN / machine 2009 an overhaul: new drive motors - guides checked and adjusted / round table / probe / accessories / good condition
Fe.gi.Maschinen.SBG.at

MIKRON milling machine model WF 3 / year 87 / xyz: 500-500-400 / table 600 x 400 / 40 SK / 3150 RPM / CNC HEIDENHAIN / machine 2009 general overhauled: new drive motors - guides checked and adjusted / round table / measuring sensor / accessories / good condition
Fe.gi.Maschinen.SBG.at
1987
Price  
  AT   request
96039148 103

MIKRON WF 32 D for sale
CNC Milling Machines


Description: They offer here a super functional, top surviving CNC milling machine, the brand Micron, which is known for excellent quality of your stay. The machine is in good condition. There are small traces of use. ...
used machine
 
Description:

They offer here a super functional, top surviving CNC milling machine, the brand Micron, which is known for excellent quality of your stay. The machine is in good condition. There are small traces of use. This machine provides you with a precise and accurate and powerful metalworking.

Technical data:

Brand: Micron

Type: WF32D

Control: HEIDENHAIN TNC 407 / 415

X way 560 mm

Y way 500 mm

Z-way 400 mm max.

442/ 492 table/spindle distance mm

infinitely variable spindle speeds 25-4000 RPM.

Tool holder ISA 40 Quill stroke

80 mm vert. Head swiveling +-45°

Feed continuously 3 axes

2-3000 mm / min.

Rapid traverse X + Y 6000 mm / min.

Rapid traverse Z 5000 mm / min.

3.5 kW

Total power 15 kW

Weight approx. 3.9 t

External dimensions approx. 2570 x 1800 x 2170 mm

with tool changer with 22 seats -.

fixed angle table 900 x 530 mm-

Numerical control HEIDENHAIN TNC 407/415 used, in good condition
1993
8,571 €  
  DE   request
94498880 1107

VPT 31 10 WF for sale
Gas Compressor


One used sewage gas compressor VPT 31 to sell 10 WF in really good working condition for sale. The gas compressor was regularly maintained and used until recently. Data: Medium natural gas/sewage ga ...
used machine
 
One used sewage gas compressor VPT 31 to sell 10 WF in
really good working condition for sale.
The gas compressor was regularly maintained and used until recently.

Data:
Medium natural gas/sewage gas
Operating pressure 4-9 bar
Flow rate 4, 1 m³/min
Power 31 KW
electrical 380 V / 50 HZ
Weight: 1000 kg


By questions:

Igor Kandlin 01522/7551049

Info@stromerzeuger-discount
1986
4,800 €  
  DE   request
94498772 103

HERMLE UWF 801 for sale
NC universal milling machine


NC universal milling machine Year of construction: Control: HEIDENHAIN TNC 131 Spindle retainer SK40 Table size B x T: 800 x 400 mm / 8 T-slot Travel in X / Y / Z: 500 / 430 / 400 mm Quill stroke: ...

 
NC universal milling machine

Year of construction:
Control: HEIDENHAIN TNC 131

Spindle retainer SK40
Table size B x T: 800 x 400 mm / 8 T-slot

Travel in X / Y / Z: 500 / 430 / 400 mm
Quill stroke: 70 mm
Spindle speeds of 40 to 2,000 revolutions per minute in 12 steps
Feed range of 4 1.600 mm up to / min
Coolant system
Central lubrication system
Chip tray

Machine dimensions W x D x H: 1,700 x 1.700 x 1,900 mm
Machine weight: 1.100 kg

73450 Neresheim price plus 19% VAT from site
Mistakes and intermediate sale is reserved

 
3,900 €  
  DE   request
89734066 101

HERMLE UWF 1200 H for sale
Machining Center - Universal


Control - CNC Heidenhain TNC 425 x-travel - 850 mm y-travel - 630 mm z-travel - 500 mm Measuring probe - Heidenhain TS 120 Table surface area - 550x368 mm Angle table - 1200x550 mm Tool taper - SK 40 Spindle di ...
used machine
 
Control - CNC Heidenhain TNC 425

x-travel - 850 mm
y-travel - 630 mm
z-travel - 500 mm
Measuring probe - Heidenhain TS 120
Table surface area - 550x368 mm
Angle table - 1200x550 mm
Tool taper - SK 40
Spindle diameter in front bearing - 75/55 mm
Diameter of quill - 110 mm
Quill stroke - 95 mm
Turning speeds - 25-4200 U/min
1992
Price  
  DE   request
88275514 102

PONTIGGIA WF 350 for sale
Turning Machines (Lathes)


Accessories: -Three-jaw Chuck -Steel holder with 2 inserts -Live -Chuck Tip height 350 mm Top width 1500 mm Turning diameter over bed 720 mm Turning diameter over slide 496 mm Rotary Ã? about offset 950 mm Bed wi ...
used machine
 
Accessories:
-Three-jaw Chuck
-Steel holder with 2 inserts
-Live
-Chuck

Tip height 350 mm
Top width 1500 mm
Turning diameter over bed 720 mm
Turning diameter over slide 496 mm
Rotary Ã? about offset 950 mm
Bed width 420 mm.
Spindle bore 105 mm
Spindle motor power 10 HP
Tailstock Quill ø 80 mm
Tailstock Quill, recording MK 5
Tailstock Quill, travel 200 mm
Längsautom. Feeds 44
Feed range 0.087 - 1.32 mm / Rev
Cross feed autom. 44
Feed range 0.04 - 0.66 mm / Rev
Spindle retainer, Cam-Lock 8 "
Machine weight approx. 2500 kg
Dimensions L/W/H 3200/1300/1500 mm
Motor
 
Price  
  CH   request
87807902 110

MIKRON UWF for sale
Angle Tables


SOLID ANGLE TABLE MICRON UWF - 27-04-005 Shipping time: immediately Number: 27-04-005 Manufacturer: Micron Type: UWF MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 840 x 500 x 500 mm Weight: 200 k ...
used machine
 
SOLID ANGLE TABLE MICRON UWF - 27-04-005

Shipping time: immediately

Number: 27-04-005

Manufacturer: Micron
Type: UWF

MACHINE DATA
Year of construction: approx. 1990
L x W x h: approx. 840 x 500 x 500 mm
Weight: 200 kg

Very good condition

suitable e.g. for: Micron UWF 801 & 802 UWF

TECHNICAL DATA
Table size: 840 x 440 mm

T - grooves (clamping surface):
Number: 6 pieces
Size 14 mm

Hole spacing (mounting surface): approx. 2 x 120 mm

Other accessories on request
Price and other specifications on request
1990
Price  
  DE   request
86947344 503

all metal separator


All metal separator, all metal viewfinder; manufacturer: S S

 
All metal separator, all metal viewfinder; manufacturer: S S
 
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country