used MEYER Pile turners

Content 60 cbm Bulk weight 0.6 Diameter 2.40 m Height 15.50 m Head Railing

- with vertical rubber belts (total length: 28 m) - with ascending conveyor - with electrical panel - with pneumatic crown cork chute - with platform - with 2 magazines

- with vertical rubber belts (total length: 28 m) - with ascending conveyor - with electrical panel - with pneumatic crown cork chute - with platform - with 2 magazines

Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 180 to Total stroke: 150 mm Rapide stroke Execution: 4 columns Table surface: Length: 800 mm Width: 500 mm Distance from table to slide-nose: min.: 540 mm max: 690 mm Passage between columns: longitudinal: 460 mm Lateral: 260 mm Min. stroke: 16.6 mm/s Max. stroke: 83.3 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Necessary air quantity Machine´s weight about: 5000 kg Overall dimensions machine: Length: 2000 mm Width: 1800 mm Height: 3500 mm Various accessories: Lower extractor

Key data: 25

Capacity: 25 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Technical data Pressure: 25 to Total stroke: 100 mm Execution: 4 columns Table surface: Length: 640 mm Width: 430 mm Passage between columns: longitudinal: 450 mm Lateral: 240 mm Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Total power required: 10.00 HP Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1400 mm Width: 1400 mm Height: 2200 mm

Key data: 500 , 1500 , 500

Technical description: Turning diameter over bed 500mm Turning diameter via support 325mm Turning diameter in bridge 630mm Center width 1500mm Bed width 330mm Spindle nose CAMLOCK Gr.8 Spindle bore 80mm Speed levels 15 Speeds 24 – 1600 rpm Metric threads 66 0.5-28mm Inch thread 66 1-56 Module thread 33 0.5-3.5 Diametrical Pitch 33 8-56 Longitudinal feeds 0.072-4.038mm/U Cross feeds 0.036-2.019mm/rev Tailstock MK5 Tailstock pinole stroke 120mm Motor power 380V 5.5KW Weight Approx. 1900kg Equipment: Digital display 3 axes with glass measuring rods. Quick-change steel holder system Multifix compatible Gr.B with 4 pockets, removable bed bridge, lining protection with electr. Locking, foot brake, coolant system, fixed stop, halogen work light, 3-jaw chuck, 4-jaw chuck, clamping disc, lynettes, tips, hardened and ground bed guide tracks, hardened and ground gears, ti ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Total stroke: ca 300 mm Execution: 4 columns Table surface: Length: 530 mm Width: 380 mm Passage between supports: longitudinal: 550 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 3200 mm

Internal hole diameter: 304mm, compressed air supply: 7.2bar.

Max. operating temperature: 220°C, heating output: 137kW, compressed air supply: 6bar, connected load: 150kW, length: 5650mm, width: 3200mm, height: 1690mm, weight: 8t, with documentation.

Fusing width: 600mm, max. temperature: 200°C, conveyor speed: 1-9m/min, connected load: 6.7kW, weight: 180kg, with documentation.

Double-sided grinding and polishing block MEYER type SMP Masch. No. 848 Year of construction 1963 Shaft diameter 50 mm Grinding wheel holder 305 mm Wheel spacing 1470 mm Grinding and polishing wheel diameter max. 800 mm Working height 550 mm Speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately- star-delta switch for each drive motor separately - speed change over flipping the drive belt - dust extraction flange 100 mm- mounted are 2 pieces corundum grinding wheels with 40 mm width, approx. 560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg good condition; used

Inv. Num. : 6050 Type: 30T Producer: MEYER Produced: 1982 Parameters: Compressive force: 30 t Distance between frame walls: 300 mm Lifting height: 200 mm

One hour of operation - for experimental purposes only. Works of course - ideal for installation in air ducts but can also be used as such. However, attention must be paid to personal protection. Original purchase price: 590.24 €

2 Pieces Can Rinser Empty Can Rinser for Standard Can 330 ml 2 pieces of can rinser empty cans for Standard cans 330 ml Can Rinser SZGS IL ZV

Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Power: 0.2 kW -max temperature 110° C -electrically heated -Steel lining -Weight: 7 kg -Number: several dryers available -Price per piece

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,45 m -Weight 3 kg

* General * SKU091P368 * LocationBarneveld * MakeMeyer-Hennef/Sieg * No.C 851303 * Year of construction1985 * Main Features * MaterialStainless steel * Motor9 KW * Specified Features - Deaerators * MaterialStainless steel * Information * Extra SpecificationsScrew diameter 240mm, Schrew length 3400mm, Pitch 150mm, Shaft diameter 100mm, Length vacuum section 1750mm, Inlet 500x400mm, Outlet dia. 250mm, Motor 9 KW, 380/660 Volt, Variable speed (45-77 Rpm), With switchgear, Floorspace 5,5x1,3 M, Total height 1,0 M, Without vacuum pump DeaeratorsMeyerDe-aerators > DeaeratorsBrand > Meyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Meyer dosing screw with built-up suction filter in stainless steel, incl. side channel blower

Meyer mobile transport belt, s/s mesh belt, belt width: 1000 mm, total dimensions: 2115 mm x 1430 mm x 1020 mm.

There are three Push-Pull Attachments Meyer 1-2503 N, one Implement/ Box Clamp Cascade 20D-CC-X07J and one Multiple-Pallet Tine Adjuster Durwen DPK 30B available, all attachments are only conditionally serviceable as they have not been in use for some time, all items would need to be checked.

pressure:120 t distance between columns:430 mm stroke:125 mm distance table/ram, stroke up:400 mm table surface area:430 x 450 mm table height over floor:860 mm side window:230 mm ram surface:250 mm working speed:10 mm/s power requirement:11,0 kW weight:2,5 t dimensions (WxDxH):1,6 x 1,3 x 2,4 m German Safety: permitted for manual loading:CE-sign

Capacity max Kg: 400 Total connection KW: 1.1

Size max 1.120 x 1.620 mm Lifting height max 1.040 mm lifting capacity 1.000 kg Weight 490 kg (approx.)