used MEWA Rotor shears

- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product

Used Shredder for sale information on request! Spare shafts, renovations, repairs,

Used Shredder for sale information on request! Spare shafts, renovations, repairs,

Rotor shears/universal shredders Knife width: approx. 1,500 mm Drive 1 x 45 kW and 1 x 55 kW with control cabinet, hydraulic station, inlet hood, substructure additionally 2 sets of shredding tools as well as 4 pallets of various wear parts BEZNER trigger tape 1.400mm x 5,6m

Outside diameter maximum: 0 mm Wall Thickness: 0 mm Pipe length maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Manual bending device: Tube: Diameter: 42 mm Wandstärke: 2 mm Max. bending angle: 185 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 3060 mm Width: 1025 mm Height: 1078 mm

Tube bending machine make MEWAG type RB 35 AFabr. -No: 2309 Year Oct. 1977Bending line max .: 35 x 2 mmBending radius max.:180 mmBending radius min.:25 mmSpeed of the bending plate: 78.1 / 5.6 rpm.Drive power: 1.5 hpDimensions L x W x H: 720 x 485 x 1160 mmWeight approx .:270 kgwithout spine device!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

tube diameter: max 60 mm wall strength: 3 mm bending capacity pipes: 60 x 3 mm weight of the machine ca.: 2000 kg dimensions of the machine ca.: ca. 8000 x 1300 x 1200 mm including a lot of accessories 6 mandrels, mandrel extension length 6000 mm and various bending tools (see photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEWAG DEEP-HOLE DRILLING MACHINE - IXION TL 500 -Drilling depth approx. 500mm -Table size 800x450mm -Table rotatable/angle adjustable -Drilling stroke / by hand -Chuck -Miscellaneous tools 2juewbf Dimensions: LxWxH 1.6x0.8x1.6 meters Weight approx. 1250 Kg

core drilling diameter max.: 16 mm bore depth: 485 mm swing diameter: x mm table-size: 590x350 mm spindle turning speed range: 230-2300 U/min weight of the machine ca.: 0.4 t Table with digital read out Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

Untha RS 100 HD four-shaft shredder. Very good condition. Cutting unit new! With control cabinet and insertion troughs. Drive power 2 x 55 kW. With new 30 mm perforated screen!

Rotor shears with feed hopper and base frame Demonstration machine with only 10 operating hours 2 x 15 kW Cutting unit 600 x 850 mm Rotor shear with hopper and feet demo machine with only 10 working hours 2 x 15kW Cutting chamber 600 x 850 mm

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

; New Diameter: 635mm Height: 590mm

Lobe rotor pump,stainless,acid proof steel,IBEX type NMOG/322,0,75 kW TEO Cap 2957 l/h.

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Three-phase twin-rotor motor, three-phase electric motor, pole-changing motor VEM, ELECTRIC MOTOR PLANT GRÜNHAIN ADW938-A2 0,55 / 0,11 kW 2770 / 450 rpm 220 / 380 V 3AC IP 44 shaft diameter: Ø 12 / 15 mm, fan side: Ø 18 mm wavelength: 18 / 20 mm, fan side: 35 mm groove: 4 x 12 mm, fan side: 6 x 26 mm hole spacing (parallel to shaft): 30 / 88 / 30 mm hole spacing ( transverse to shaft ): 65 mm 8x threaded hole: M5 x 0.8, depth: 15 mm used, tested ! Dimensions: 390 x 205 x 160 mm

Linear motor with rotor LINMOT PS01-23x80-R Product no.: 0150-1233 stroke: max. 780 mm force: max. 44 N Nominal force : 8.6 / 16 N Max. Speed: max. 5.9 m/s stator diameter: Ø 23 mm stator length: 162 mm rotor diameter: Ø 12 mm Runner length: 130 mm (max. 850 mm possible) stator with IP67 connector M17/9(m) used, tested ! Dimensions ( packaging ): 195 x 35 x 75 mm

T-Rotor Pump, Gear Pump, Trochoid Pump, Feed Pump with Motor NIPPON GEROTOR CO. LTD. AMTP-216HA(VB) Q: 24.3 l/min p: 2.0 MPa ( 20 bar ) n: max. 1500 rpm Input: G3/4 Output: G3/4 Engine: ELQ-8T 1,5 kW 1430 rpm 200 V 3AC spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions: 440 x 250 x 185 mm

Impeller with pump rotor for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,5 x 1 x 6 impeller, closed: D175 Material number: 9427-93-1006 diameter: 175 mm, width: 20 mm pump rotor: 50 Nm Material number: 9427-93-3002 Bearing bushing diameter: Ø 45 mm Shaft bushing: Ø 24.5 mm New ! Dimensions: 175 x 175 x 127 mm

Steam oven, built in 2006, in good condition, fully functional against bid from 76131 Karlsruhe