used MAYRHOFER Resawing machines

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE !!!! Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE !! NO good

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc.......

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

Hydraulic Wood Feeding Trolley

REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control

Top-equipped automatic trimmer in very good condition, with loading on both sides! 3 Movable flanges and new controls! 2 x board separator The fed boards are separated with 2 S-shaped chain cross conveyors. Hydraulically actuated ejectors eject when the Take the leading board back. A fast-running cross conveyor takes over the board after separation and feeds it to the assessment and manipulation station. Double-sided feeding, control NEW! (OPTILINE) The BKO trimming circular saw has two overhead width-adjustable saw shafts, each with a blade flange. on the saw shafts (BKO 3). With one separating flange per side and adjustment via telescopic shafts. The width adjustment is servo-hydraulic.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Make: AMPACK, Type: Round filler ARL 8/3 Cup diameter 95mm Machine No.: 783 (0783000C) Year of construction: 1993, Commissioning 09/1994 - Control: year 2021, New built on Siemens S7 with encoder. - Slip-on lid station: 2008 NEW - All three fillers completely renewed 2022 !! Inclusive: - Sterile air module for laminar flow - Tray packer AMPACK - Tray erector A&F, for trays of 20 and 12 - Fruit mixing station (3x) - Various conveyors comple line in very good care!! Dismantling by the buyer or etra charges

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024