british flag
Resale Logo

Max S used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing machinery  BOZAL Graphische Maschinen GmbH  http://www.bozal.com 
banner logo
start page > keywords Max S > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125499304 109

SERRMAC MDR 32 for sale
Tapping Machine


tapping machine column YEAR 1998 SPEED # 12 MIN-MAX RPM 64-1720 TABLE MM 600X350
used machine
 
tapping machine column
YEAR 1998
SPEED # 12
MIN-MAX RPM 64-1720
TABLE MM 600X350
1998
3,990 €  
  IT   request
125499303 109

MITSUBISHI CX20 for sale
E2475


State: Machine still runing by customer X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece ...
used machine
 
State: Machine still runing by customer

X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
1976
Price  
  IT   request
125489668 101

MATEC Matec 30 SH for sale
Processing Centers


REF.-No. 00495 Description of the system used CNC machining center manufacturer Matec Model Matec 30 SH Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm Y 400 mm Z 400 mm machine table 1000 x 6 ...
used machine
 
REF.-No. 00495

Description of the system used CNC machining center manufacturer Matec
Model Matec 30 SH
Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm
Y 400 mm
Z 400 mm machine table 1000 x 600 mm T grooves 6 x 14 H 10 (grid panel) power drilling capacity in St 60 40 mm
Threading in St. 60 24 M
Milling capacity in ST 60 400 cm3/min

Main spindle drive power 40% ED 15-16 kW
Speed range 20-15,000 torque max. 127 NM
2003
Price  
    request
125499102 905

TEREX 2306 Teleskoplader for sale
Telehandlers for agriculture


; Accessories: Kabine, Diesel; Maximum lift capacity [kg]: 2300
used machine
 
; Accessories: Kabine, Diesel; Maximum lift capacity [kg]: 2300
2001
17,900 €  
  AT   request
125484140 804

PLANETA Supervariant P 44 for sale


-Four colours with 2/2 or 4/0 max size 72x102 cms. -Varidamp dampening with Webitalia refrigeration system -Varicontrol Planeta Console with ink and plate registers ( no cocking ) -16.000 hours of work, installed a ...
used machine
 
-Four colours with 2/2 or 4/0 max size 72x102 cms.
-Varidamp dampening with Webitalia refrigeration system
-Varicontrol Planeta Console with ink and plate registers ( no cocking )
-16.000 hours of work, installed and under production
-No damages, complete with all accessories
1992
29,000 €  
  IT   request
125497094 1010

Falck schmidt TS18 Self-Propelled, Electric, 18m W for sale
Telescopic handlers


; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
1990
5,900 €  
  NL   request
125484136 201

GRIGGIO SC 1600 for sale
Panel saws


Code: 0365 Brand: GRIGGIO Model: SC 1600 - Ce Standard Panel saw with tilting blade and scoring unit - CE Standard Technical data: Lenght of cut mm 1600 Width of cut between saw blade and square mm 12 ...

 
Code: 0365
Brand: GRIGGIO
Model: SC 1600 - Ce Standard

Panel saw with tilting blade and scoring unit - CE Standard

Technical data:

Lenght of cut mm 1600
Width of cut between saw blade and square mm 1250
Max height of cut mm 130
Tilting blade 0°-45°
Max blade diameter mm 400
Blade motor Hp 5,5
Scoring unit diameter mm 125 - Motor Hp 0,75
Overall dimensions mounted machine mm 1700 x 2850 x 950 h
Packing dimensions mm 1750 x 1200 x 1000 h
Weight kg 755



 
Price  
  IT   request
125497096 1010

Falck schmidt TS24 Self-Propelled, Electric, 23.8m for sale
Telescopic handlers


; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
1990
6,900 €  
  NL   request
125481472 209

SCHUKO - GERMANY OCTOPUS 30 for sale
Sanding dust extraction table


Code: 0363 Brand: SCHUKO - GERMANY Model: OCTOPUS 30 - CE Standard Sanding dust extraction table - CE Standard - Year 2003 Worktable lenght mm 3280 Worktable width mm 1000 Worktable height mm 1000 Ex ...

 
Code: 0363
Brand: SCHUKO - GERMANY
Model: OCTOPUS 30 - CE Standard

Sanding dust extraction table - CE Standard - Year 2003

Worktable lenght mm 3280
Worktable width mm 1000
Worktable height mm 1000
Exhaust outlet diameter mm 200
Maximum noise level 63 DB
n° 2 suction cups mm 100 x 300 for clamping of product
Single-phase electrical outlet V220
Overall dimensions : mm 3280 x 1000 x 1000 h
Weight kg 200


 
Price  
  IT   request
125497100 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX3DK12231; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX3DK12231; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
2003
14,900 €  
  NL   request
125480017 101

SMTCL VMC 1051 for sale
Numerically Controlled Machining Centres


Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delive ...
used machine
 
Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delivery immediately cargo Base EX WORK technical details x way 1020 mm y way 510 mm z trail 650 mm CNC CNC FANUC 0I MC FANUC table size 1120 X 510 mm ISO 40 spindle adaptor bt spindle speeds 8000 1/min spindle drive motor (30 min) kW tool changer 15 for 24 tools
maximum table load of 1000 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 30 m / min feed range 20000 mm / min weight 7 tons of space approximately 3.0 x 2.60 x 2,90 m description - control: FANUC OI MC.
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2007
28,000 €  
    request
125497102 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX7DK13277; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX7DK13277; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
2007
21,900 €  
  NL   request
125480011 101

YCM SUPERMAX MV 106 A for sale
Numerically Controlled Machining Centres


Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of origin Taiwan delivery time immediately cargo base EX WORK technical specifications x way 1020 mm y-way 600 mm z-way 600 mm FANUC CNC control 20 I FANUC table size 1120 X 650 mm spindle retainer ISO 40 spindle speeds 8000 bt 1/min spindle drive motor (30 min) kW tool changer 18 for 24 tools of Max table load 1200 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 12 m / min feed range 1-5000 mm / min weight 7 tons of space approx. 2.90 x 2.60 x 2.50 m description - St FANUC euerung 20 IN the
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2006
27,500 €  
    request
125497104 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX4DK12449; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX4DK12449; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
2004
15,900 €  
  NL   request
125480001 110

RUNDLAUFPRÜFGERÄT SPW 720 for sale
Measurement Technology


Concentricity test instrument SPW 720 11-99-004 delivery time: immediate number: 11-99-004 manufacturer: concentricity test device type: SPW 720 MACHINE data year: approx. 1985 L x W x H: approx. 1250 x 250 x 420 mm w ...
used machine
 
Concentricity test instrument SPW 720 11-99-004 delivery time: immediate number: 11-99-004 manufacturer: concentricity test device type: SPW 720

MACHINE data year: approx. 1985 L x W x H: approx. 1250 x 250 x 420 mm weight: approx. 100 kg

Very good condition specifications concentricity test instrument maximum wavelength between top: approx. 720 mm maximum wavelength on Prism: approx. 1500 mm centre height: approx. 250 mm maximum circulation - diameter: approx. Ã? 500 mm accessories â?¢ 2 piece grooves â?¢ Prism for l Ange waves on trestle (see pictures attached) â?¢ 2 x quick release skewers - Bock clamping accessories on request price and further technical details on request
1985
Price  
    request
125497106 1010

GROVE T86J Diesel, 4x4x4 Drive, 28m Working Height, Jib, for sale
Telescopic handlers


; Gross weight [kg]: 17750; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 17750; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 227
2001
17,900 €  
  NL   request
125479999 109

GILDEMEISTER MICROSET for sale
Profile Projectors


PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset MACHINE data year: approx. 1986 L x W x H:  ...
used machine
 
PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset

MACHINE data year: approx. 1986 L x W x H: approx. 1800 x 1200 x 1800 mm weight: approximately 1000 kg

Very good condition specifications control / digital display: Quadra - Chek 200 procedures (range): X - axis: approx. 620 mm Y - axis: approx. 300 mm maximum tool length: approx. 625 mm max � Pro�lprojektor: approx. � 400 mm for tool - recorded: ISO 4 0 loading ISO 50 with catchment HSK 100 with reference tool ABS 63 with reference tool ABS 80 with reference tool accessories � complete machine documentation � feet � transport locking devices

Accessories on request price and other specifications on request
1986
Price  
    request
125497108 1010

HAULOTTE H16TPX Diesel, 4x4 Drive, 16m Working Height, Roug for sale
Telescopic handlers


; Gross weight [kg]: 7070; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 7070; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 230
2009
15,900 €  
  NL   request
125479997 109

SODICK A 325 for sale
Wire Cutting Spark Erosion Machine Tools


Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base s ...
used machine
 
Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base stock HAGUENAU

Technical details table length 600 mm table width 400 mm amperes A travel - x 350 mm travel - y 250 mm travel - z 220 mm U-axis 80 mm V-axis 80 mm wire diameter 0.03 - 0.3 mm working pool size 895 x 650 mm max. work piece weight 450 kg Werkstückhö Hey â Max 220 mm workpiece dimensions Max 600w x 530 x 200 mm autom. Wire Threading conical cutting +/-30 ° / 30 mm ° wire voltage 300-2300 g dielectric 530 l total power consumption kVA machine weight approx. 3000 kg space requirement approx. 2.25 x 2.45 x 2.10 m description Autom. Wire Threading AWT serial data interface
1998
18,500 €  
    request
125497110 1010

GENIE S125 Diesel, 4x4x4 Drive, Jib, 40.1m Working Heigh for sale
Telescopic handlers


; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loa ...
used machine
 
; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loading / lifting capacity: 230 kg, Working height: 40.1 m, Horizontal reach: 24.4 m, Boom sections: 4, Drive speed: 4.8 km/H, Numbe; Maximum lift capacity [kg]: 230
2008
67,500 €  
  NL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Planeta Supervariant P 44


-Four colours with 2/2 or 4/0 max size 72x102 cms. -Varidamp dampening with Webitalia refrigeration system -Varicontrol Planeta Console with ink and plate registers ( no cocking ) -16.000 hours of work, installed and under production -No damages, complete with all accessories

Panel saws GRIGGIO SC 1600


Code: 0365 Brand: GRIGGIO Model: SC 1600 - Ce Standard Panel saw with tilting blade and scoring unit - CE Standard Technical data: Lenght of cut mm 1600 Width of cut between saw blade and square mm 1250 Max height of cut mm 130 Tilting blade 0°-45° Max blade diameter mm 400 Blade motor Hp 5,5 Scoring unit diameter mm 125 - Motor Hp 0,75 Overall dimensions mounted machine mm 1700 x 2850 x 950 h Packing dimensions mm 1750 x 1200 x 1000 h Weight kg 755

Sanding dust extraction table SCHUKO - GERMANY OCTOPUS 30


Code: 0363 Brand: SCHUKO - GERMANY Model: OCTOPUS 30 - CE Standard Sanding dust extraction table - CE Standard - Year 2003 Worktable lenght mm 3280 Worktable width mm 1000 Worktable height mm 1000 Exhaust outlet diameter mm 200 Maximum noise level 63 DB n° 2 suction cups mm 100 x 300 for clamping of product Single-phase electrical outlet V220 Overall dimensions : mm 3280 x 1000 x 1000 h Weight kg 200

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible -Top conditions Included CTP SDP-ECO 1630 III R Platesetter: Computer to plate for plates in polyester and paper ( Silver- Digiplate ) -RIP Mitsubishi SDP-RIP, Intelcore 2 Quad Q 6600, Ram 2 Gb

Mechanical Presses Schuler PSt 250-10-400


Press Schuler PSt 250-10-400 The machine is in good technical condition. Crimping force: 250t Number of Instrument Stations: 8 + 1 Band width: 630mm Band feed: 0-630mm Sheet thickness: max. 4mm Bearing weight: 4500kg External diameter max. 1200mm Internal diameter from-to: 410-480mm Engine 60kW Dimensions of the press: 6225 x 3100 x 8425 mm Including unwinding and straightening equipment and transfer. Upon agreement, possible to test.

CNC Turning Machines Colchester TORNADO 200


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England GENERAL DATA: Measurements width: 2455 mm Measurements depth: 1420 mm Machine weight: 3000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE FANUC Model: Series O-T MOVEMENT: X-AXIS movement: 215 mm Z-AXIS movement: 400 mm WORKPIECE: Workpiece drm: 250 mm TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 40 mm MEDIA: Power consumption: 45 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 29x Tool holder

Macchina utensile per lappatura ACCU-CUT 6SM I ACCU-CUT 6SM I


TECHNICAL CHARACTERISTICS: Bore-maximum: 1.5 ", piece Size-Max OD: 5.0", Distance between spindles: 5,166 ", 6, 8 index Stations: spindles: Index table diameter: 20 "Center from column to table: 13-1/2" Spindle motor: HP 7-1/2, spindle speed: 1200 rpm, variable Feed Rate: 0-200 IPM, Machine dimensions: 58 "(L-R) x 73" (F-B) x 96 (H) Cooling system size: 36 "w x 36" W x 36 "H, Gxsumz2 Weight-approx: 5,500 pounds.

Wire EDM Machine AGIE AGIECUT EVOLUTION 3


X-travel: 500mm, y-travel: 350mm, z-travel: 256mm, max. workpiece dimensions: 1050x550x250mm, max. workpiece weight with/without bath: 400/800kg, control: AGIEVISION, operational hours: ca. 130000h, including handling robot EROWA EASYHAND ROBOSET RS UNO-L.

Milling machine centers MORI SEIKI MV-45/40


OVERVIEW: Brand: MORI SEIKI Model: MV-45/40 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1986 Production hours: 28000 Location: Netherlands Origin country: Japan GENERAL DATA: Measurements width: 3800 mm Measurements depth: 3500 mm Measurements height: 3150 mm Machine weight: 8000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 6000 1/min CONTROL UNIT: Brand: Fanuc Model: 11M MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm WORKPIECE: Workpiece drm: 160 mm Workpiece weight: 1000 kg TABLE: Outer length: 1200 mm Outer width: 460 mm TOOLS: Max weight: 20 kg Max tool diameter: 95 mm Max tool length: 300 mm MEDIA: Main electronic connection: 380 V Power consumption: 22 kVA Chip conveyer: yes Internal cooling: yes

Turning Machines (Lathes) Pinacho SE-200


OVERVIEW: Brand: Pinacho Model: SE-200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Location: Spain Origin country: Spain GENERAL DATA: Measurements width: 1100 mm Measurements depth: 1875/2150 mm Measurements height: 1825 mm Machine weight: 1300 kg MAIN DRIVE: Number of spindle: 2 Spindle speed range: 2800 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 808D WORKPIECE: Workpiece drm: 402 mm TOOLS: Max tool diameter: 20 mm

Gear Grinding Machines HOFLER PRIMA H 1000 E


Gear max. wheel diameter 1000 mm gear width 530 mm max. module 18 min. module 1,5 max. number of teeth 195 min. wheel diameter 300 mm

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Casting press URPEMAK URPE CC 50


Injection molding machine for aluminium URPEMAK URPE CC 50 built in 2005 the year in Spain. Foundry machine URPE URPEMAK CC 50-parameters: -clamping force: 500 kN -Road: 260 mm -the strength of the ejector: 62.8 kN -ejector stroke: 50 mm -height (min-max): 100/325 mm -dimensions: 500 x 500 mm -distance between columns: 320 x 290 mm -diameter: 60 mm -the position of the injection: 0-50 mm -the maximum force-cast: 50 kN -diameter of piston injection: 45-50-55 mm -feed cast: 140 mm -the surface of the casting: 159-196-238 cm2 the mass/volume of injection: 91-140-188 cm3 -injection pressure: 314-254-210 daN/cm2 -the feed piston: 150 mm -motor: 11 kW -weight: 4900 kg -dimensions: ok. 407 x 225 x 220 cm

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Profile Saw FILL SM-02


Profile length: 7200mm, max. finished part length double mitre 60°: 1750mm, finished part length chop cut: 80-2500mm, working angle: 0-60°, profile height: 20-150mm, frame layer dimensions in frame/ to the saw: 1200/ 1000mm, short/ long shapes: 80-499/ 500mm, max clamping length: 175mm, machine includes automatic stacking, infeed, saw with clamping system, outfeed and unloading.

Horizontal Machining Center SCHARMANN Ecocut 1.3


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.

Universal Machining Center BURKHARDT WEBER MC 120 HV


X-travel: 1600mm, y-travel: 1250mm, z-travel: 1250mm, B-travel: 360°, max. table load: 5t, clamping surface: 2x 1000x800mm, with pallet changer.

Horizontal Milling Machine BURKHARDT WEBER MC 80


X-travel: 1600mm, y-travel: 1000mm, z-travel: 800mm, B-travel: 360°, max. table load: 3t, drive power: 20kW, clamping surface: 2x 800x800mm, with pallet changer.

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Jig Boring Machine SIP HAUSER MP-54


X-travel: 650mm, y-travel: 450mm, z-travel: 500mm, clamping surface: 770x630mm, max. table load: 500kg, drilling spindle stroke: 160mm, drive power: 5kW.

Plate Shear BEYELER C 4100 x 6


Cutting length: 4100mm, max. sheet strength: 12mm.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

CNC Lathe MONFORTS RNC 500 MultiTurn


Clamping surface diameter: 356mm, turning length: 1000mm, swing over bed/ cross slide: 600/ 425mm, internal draw tube diameter: 86mm, number of tool stations: 12, max. rotational speed: 4000/min.

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Shredder DOPPSTADT AK-430 PROFI


Motor: MERCEDES BENZ diesel engine OM 501 LA, mallet drum dimensions: 1750x1100mm, rotational speed: 850-1000/min, number of mallets: 36, mallet weight: 14.5kg, max. inlet height: 650mm, outlet conveyor dimensions: 4000x1800mm, conveyor speed: 2.25m/s, ejector height: 3000mm, length: 11630mm, width: 2500mm, height: 3000mm.

Cylindrical Grinding Machine TSCHUDIN HTG 430


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Waterjet Machining Center OMAX 2626


X-travel: 737mm, y-travel: 660mm, z-travel: 203mm, table dimensions: 1168x787mm, max. table load: 1.95t/m², speed: 4572mm/min, length: 2946mm, width: 1829mm, height: 2540mm, weight: 2.962t, including accessories, machine is as good as new.

Mono Progressive Cavity Pump NOV MONO LE 502


max. working pressure: 12bar, rotational speed: 1750/min, max. working temperature: 20°C.

Zirkon Supra 660


Zirkon Model Supra 660 4 color Year: 1990 Cutoff: 452mm Max speed: 42.000 p/h 1 Enkel reel stand with reel travers 1 Infeed with web guide control 4 Zirkon printing-units with Baldwin alcohol damping and Baldwin blanketwashing 1 Dryer MEG Sigma plus year: 1997 1 Chillstand with webguide and silicon 1 JIMEK Perforater unit 1 superstructure with turnerbars and slitting knives 2 Zirkon folders with one chopper folder and one double chopper 1 Planatol gluing system even crossgluing Bcdjekyxh3 1 Quadtech RGS 4 register controll 1 Quadtech cutoff control 2 Gämmerler trimming RS 92 2 Gämmerler bumpturn 1 IVT tempcontrol ink vibrator, chill roller, alcohol mixer 1 IVT ink distrubition with 4 pumps for ink container connection 2 Color Control pults remote ink 1 Machine Controll pult 1 plate bench and punch Full documention: electrical,mechanical and other manuals! Perfect for 8 page A4 or 16 page A5! Single production or double production 4 page A4 or 8 page A5. We ship worldwide.

Punching Machines Trumpf Trumatic 3000R-1300


Type || Punching machine Manufacturer || Trumpf Model || Trumatic-3000R 1300 Year of Manufacturing || 2004 Control || Siemens Sinumerik 840D Electrical Consumption | 18 kW | Available for Delivery || IMM Max. Tonnage | 18 t | Max. Capacity | mm | 6.4 X Axis Travel | 2,550 mm | Y Axis Travel | 1280 mm | Y Axis Velocity | mm/90/60 min | Function Multi Tool Function Threat Forming Function Engraving Function Multi Share Function Multi Bend Set of cassettes and used tools

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Turning Machines (Lathes) NAKAMURA-TOME TW-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1997 Production hours: 35200 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18-T MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Kamsan Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool

Turning Machines (Lathes) NAKAMURA-TOME W-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1995 Production hours: 1637 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: NAKAMURA-TOME Model: LUCK-BEI MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - IEMCA Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool 4 - Loading Robot

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Refrigerating machines Eco refrigerazione IDE 43B10 ED


Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Bucharest, Romania/Bucharest (RO) Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

Water Jet Cutting Machines Bystronic ByJet Pro 3015


Waterjet Bystronic ByJet Pro 3015 from year 2008, was built by the renowned Swiss manufacturer of Bystronic Laser AG. Technical data: -table size: 1500x3000 mm-number: 58.805 h-two cutting heads-maximum pressure: 3600 bar -software: ByVision p. 8004C-ByPump 50 APC water cutting machine Bystronic ByJet Pro 3015 worked under the supervision of the service. The last time the machine listed hydraulic seals.

Grid production line MASZYNY S.C. LS 6/4


Line for manufacturing of grid forest MACHINE S.C. LS 6/4 was produced in 2006. Characteristic parameters of the line to the netting machine S.C. LS 6/4: -ability to produce L-type grids; M; S Construction grid for type "L": -on the machine so far carried out configurations: 150/14/15 L; 160/20/15 L; 160/23/15 L; 180/20/15 L; 180/23/15 L -wires: fi. 2.0 mm/1.6 mm -maximum height: H = 200 cm The design of the grid for the type "M": -on the machine so far carried out configurations: 120/13/30 M; 120/13/15 M; 160/15/15 M; 160/15/30 M; 160/20/15 m; 160/20/30 m; 160/23/15 m; 160/23/30; 200/17/30 m; 200/17/15 m; 200/22/15 m; 200/22/30; 200/25/15 m; 200/25/30 m -wires: fi. 2.5 mm/2.0 mm -maximum height: H = 200 cm Construction grid for type "S": -on the machine so far carried out configurations: 120/13/15 S; 200/17/15 S; 200/20/15 S; 200/22/15 S; -wires: fi. 3.0 mm/2.5 mm -maximum height: H = 200 cm-capacity: depends on the type of mesh-medium: 4 rolls/h -the line is complete: the machine, line-construction growing, bucks on vertebrae wire snap-in-staple gun (binding end of the grid to roll), compressor

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

gabion mesh production line HEBEI FAKTORY 60X80 / 4300


Line for manufacturing of grid gabionowej HEBEI ANPING WIRE MESH MACHINE FACTORY 60 x 80/4300 was built in the year 2013. Machine for manufacturing of grid gabionowej, hexagonalnej with the following parameters: -manufacturer: Hebei Anping Wire Mesh Machine Factory (China)-the size of the meshes: 60 x 80 mm -maximum width of mesh produced: 4300 mm -wire diameter: 2.0-2.8 mm -capacity: up to 2.5 mb/min. -weight: 18 tons -engine power: 22 kW

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor
Get the latest machine offers by email: order newsletter