used MAX MÜLLER Other Machine Tools For Separating

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, numeric control, made of MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot M Year of construction approx. 1980 Rack with 20 module slots - 12 built-in modules Built-in modules : 1 piece 0.651.406-19.3 UNI 030655-1017 Universal Interface 1 piece 0.650.847-56.1 O32 output card 2 pieces 0.651.708-57.3 I32 032937-1017 Input card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY 030645-1017 Serial interface 1 piece 0.651.974-23.2 ABS termination card 1 piece 0.651.298-18.3 CPU 030649-101 7 CPU dimensions W x H x D 480x 260 x 220 mm Weight 7 kg Individual cards on request.; used

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

Ref. 449 Groove and perforation machine " Max Mohrstedt, BERLIN C. 19 " Built around 1900 Working width approx. 60 cm Groove and perforating comb weight 210 KG Condition: Tested, Functional / Perforating comb usable length approx. 55 cm

max. wheel diameter:600 mm max. module:10 min. module:2 total power requirement:1,4 kW weight of the machine ca.:0,68 t dimensions of the machine ca.:1,6x0,75 m diameter of hob:15 mm gear width:140 mm

turning diameter: 850 mm turning length: 1500 mm control: Siemens 840c centre distance: 1500 mm centre height: 450 mm turning dia. over face-slide: 690 mm spindle diameter: 200 mm spindle passage: 128 mm power capacity: 65 kW turning speeds: 7,1-18000 U/min Torque: 5783 Nm rapid traverse: 10 m/min x-travel: 510 mm z-travel: 1480 mm Tool changer: workpiece weight: 800 kg total power requirement: kW weight of the machine ca.: 17,5 t dimensions of the machine ca.: 6x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: swing diameter: 600 mm spindle bore: 73 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.3 kW 2800 rpm at 50 Hz -Voltage: 380 volts -Mounting shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Pressure press, model Korrex Berlin format 50 x 65 cm, cleaned, tested. Special feature: with color box incl. new roller, 220 volt model

Very nice pressure press by Max Simmel, model Nuremberg. Size: 38 x 50 cm. 2 sets of spare rollers.

I-Max 3D UV Printer, 60x90cm Printable Area, Printable On All Surfaces Flat Or Round On Any Materials: Paper, Wood, Glas, Metal, Tiles, Stone, Rigid PVC Board, Organic Board, Plastic, Leather, Rubber, Special Paper, Porcela, Cancas etc., Print On Object Thickness Upto 15cm, 3 SQM Per Hour (4 Pass), Print On Almost Every Materials, Less Maintainess Cost, Low Ink Consumption Cost, Max. Printing Resolution: 2880 dpi * 1440 dpi, Water Cycling Cooling System, CISS Built Inside Ink System, Automatic Height Adjustment With Sensor, Equipped With Vacumm Suction System, Image Format: Tiff, Bmp, Jpg, Eps, Pdf, CAD, Rip Software: Maintop, Photoprint. Ref-NO.: digital-printer-IMAX

Sanding belt not included - loading options available - in working order

Load capacity: 2500 kg

MAX MAX-6B Industrial Microwave 2018, Stainless, power 6Kw, Microwave frequency 2450mhz, temp range 0-300'C, variable speed, timer controls, with manual, mobile, 3Ph

4 Piece Labeler / Labeler with Zebra Printer and Aluminum Frame – used - : Price per piece ex site: only 3.950.- € (net)! Manufacturer: max GmbH Printer Manufacturer: Zebra Model: 110PAX4 Year of construction: unknown, probably 2008 Dimensions aluminium frame: approx. Length: approx. 2.66m Height approx. 2.64m Width: approx. 1.35m Condition: good Available: now Location: Hanau area More photos on request!

turning diameter: 850 mm turning length: 1500 mm control: Siemens 840D centre distance: 1500 mm centre height: 450 mm turning dia. over face-slide: 690 mm spindle diameter: 200 mm spindle passage: 128 mm power capacity: 65 kW turning speeds: 7-1950 U/min Torque: 7908 Nm rapid traverse: 10 m/min x-travel: 510 mm z-travel: 1480 mm Tool changer: ja workpiece weight: 800 kg total power requirement: 110 kW weight of the machine ca.: 17,5 t dimensions of the machine ca.: 11 x 4,2 x 3,3 m CNC turning and milling center Max Müller MDW 20 M C axis Driven tools Tool changer Tool magazine Automatic sliding door on the left Oil mist extraction Belt filter system The machine is technically and optically in very good condition. A viewing and demonstration is possible by appointment. The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to m ...

Description: Cabin size ,2500 x 1000 x 2300 mm Passage 860 mm, passage height ,1750 mm Conveyor belt 3100 x ,800 mm, with 2 roller conveyors, width 500 x 1500 mm Including 2nd cleanroom cabin 2500 x 1000 x ,2800 mm Approx. Onsite Dimension. (l x w x h): 3,100 x 1,100 x 2,300 mm, weight approx.: 250 kg

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...