used MAWERA Wood crushing machines

Slow runner with sliding floor 800 mm wide rotor 22 kw engine

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

Complete heating system 800 kw built in 2006

Wood chip heating system with 700 kw heat output only been in operation for 2 years Unfortunately, the fireclay was broken during dismantling

Slow runner with sliding floor 800 mm rotor width 11 kw motor

TECHNICAL DATA: Capacity Kg/h: 1.800/2.500 Dimension mm: 8300 x 2900 x 2200 Opening width mm: 800 02 Milling Units Ø mm: 250 Total power installed kW: 103 Weight kg: 10.500

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable

- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - Year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Laiotz A500/250 chipper - Italian production - autoreverse - Additional Top Roller TECHNICAL PARAMETERS: - material width max 500 mm - material height max 250 mm - engine power 90 kW - two knives - sieve 60x60 mm - rotor diameter 750 mm - rotor length 670 mm - three upper pulling rollers - three lower pulling rollers - conveyor belt 8000 mm - autoreverse - hydraulic shaft lifting - total power 100 kW Transport dimensions - 1200x200x170 cm - weight 7 t

Hacker RUDNICK & ENNERS Type: RE-TH 130/400/3 Year of construction: 1998 Connected loads: 400 V, with feeder vibrating chute with control box Drive power: 22 kW

mobile chipping machine incl. timber loading crane (Epsilon Q 170 Z 96) - Built on 3-axle semi-trailers with road approval - Fifth-wheel coupling - two-line air brake with ABS, hyd lowerable jockey wheel for independent transfer on paved surfaces further detailed data in the exposé

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

ORDER NO. 7188 TECHNICAL DATA - inlet width 600mm - inlet height 250mm - shaft width 600mm - shaft diameter 300mm - number of knives 32pcs - knife size 40x40mm - sieve dimensions 10mm, 12mm - toothed pulling shaft from above - shaft motor about 1.1kW - Electric autorewers - outlet for shredded wood fi 200mm, fi 300mm vibrogutter WRR 600 - vibrogutter motor power 1.8kW - vibrogutter length 3050mm - vibrogutter width 550mm - main motor 30kW - chipper dimensions length/width/height 2000x1600x1100mm - total dimensions of the vibrogutter: length/width/height 3050x700x750mm - weight 2280kg – made in Germany – used chipper, very good condition Net price: 146900 PLN Ex Tax: 33386EUR Net price calculated according to the exchange rate of 4,4 PLN/EUR (in case of major fluctuations in the exchange rate, the price may change)