We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 Fanuc OM Table length (mm)L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 610 Sk40 / 8.000 / 10Hp ATC 24 Positions Chip conveyor
used
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 500 mm Positions ATC: 20 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 vertical maching center Table length (mm) L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Bt40 / 10.000 / 7.5 kW ATC 20 Pos / 18.000 Rapid FANUC OM- Chip conveyor - Very little used - Tooling packge
used
Description: CNC machining Axis X/Y/Z 1300 x 850 x 710 mm Table 1500 x 750 mm Load capacity 3300 kg Sk 50 spindle 18.5 kW and 4500 revolutions ATC 20 changer Double chip conveyor Oil cooler Shuttle table Fanuc 18-M weight approx.: 16,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 4,525 x 3,480 mm
used
Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below
new
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Surface grinding machine make MATRA type MF 6 AFabr. -No: 73 159, built in 1973X-way: 600 mmZ-way: 200 mmGrinding wheel: 225 x 25 x 51 mmConnected load: 2.8 kWWeight approx : 1,4 tDimensions approx: 2500 x 1350 x 2000 mmwithout magnetic disk and cooling device!We need space!Special price from stock MörsdorfPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Capacity: 40 t Distance between uprights: 850 mm Stroke: 850 mm Day light: 850 mm Capacity Kg: 40000 Distance between column:850mm Table Length: 850mm Table Width: 400mm Table Height: 850mm Ram stroke: 400mm Approche speed: 90mm/min. Power: 2,2kW Length: 1400mm Width: 500mm Height: 1800mm Weight: 1000kg
used
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bezel, steady rest, lynette -for: crankshaft grinding machine -Max. Passage: O mm -Top height: mm -Technical drawing: in the photos -Number: 1x bezel available -Price per piece -Dimensions: 380/85 / H200 mm -Weight: 4.7 kg
used
x-travel: 800 mm y-travel: 500 mm z-travel: 610 mm Control: Fanuc type: 18 M table surface area: 1000x500 mm Tool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/min total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg
used
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: Fanuc 18iM Super Cap II turning speeds: 60-6000 U/min tool magazin:: 60 tool taper: BT50 total power requirement: 26 kW weight of the machine ca.: 23,6 t required space: 6,3 x 3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: typ 45400000000E , nr. 003 , max 700 bar , voltage 380 V , force: 80Ton Approx. Onsite Dimension. (l x w x h): 2,200 x 700 x 1,800 mm, weight approx.: 1,600 kg
used
Description: Machine number 461048 , Operating pressure 80 at Max. pressing force: 4 to, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 2,200 mm, weight approx.: 1,500 kg
used
Key data: 1 t, 110 mm
Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit
used
grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment
used
Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85
used
Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER
Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg
used
Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg
used
CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy