used MARTIN Surface planing machines

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right

- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors

- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors

4 Feeders 235 888 Stiching head 890 Three knife trimmer Single belt delivery

VERTICAL PACKING MASCHINE

New machine

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

used Muller Martini Alphaliner offline inserters for sale Year 1999 Alpahiner 2 into 1 inserter Line speed ca 15,000 cph Muller Martini CN25 stacker Air compressor system Gripper conveyor

Equipped with: Muller Martini 201 18 Stations Gathering Machine, Book Block Feeder, Perfect Binder Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Hot Melt Spine And Side Gluing With Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Muller Martini 3670 Three Knife Trimmer with Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour, Complete with All Standard Accessories

Sewing machine Machine No.: 4830 Working width: 350 x 250 mm with gauze holder

Built in 2007 Size max: 430 x 320 x 60 mm Size: 140 x 100 x 3 mm working hours: 17.900 h Speed:max 5.000 c/h Equipment: gathering machine: • 24 stations • 24 feeder 1571 controls: • ASIR automatic signature image reader • ASAC automatic self-adjusting calipers perfect binder: • 20 clamps • double kombined spine preparation station • hotmelt spine gluing unit • hotmelt side gluing unit • rotary coverfeeder • cover scoring • cover pressing station • 2nd cover pressing station • lay down device optional equipment --- not included ---: • PUR spine gluing unit Bl7yrcc8tb • PVA (cold glue) spine gluing unit • conveyor belts to trimmer • trimmer Müller Martini Merit

Key data: 630 mm, 2 mm, 5 kW

Equipment/Specifications: Working width: max. 630 mm Knife shaft: Tersa, Ø 125 mm, 4 blades Planing height 2.8 - 250 mm max. chip removal: 8 mm Table length: 1,260 mm Table height adjustment: electric Feed speed: 6/12 m/min Feed rollers: made of rubber Motor power: 5.5 kW Speed 5,000 rpm Power ratings: 400 V, 50 Hz, 3~ Nominal current: 16 A Suction nozzle Ø 160 mm Weight: approx. 1115 kg Dimensions: 1,260 x 1,140 x 1,200* mm *1,800 mm with hood open All information is subject to the actual equipment!

This inserting machine has a manual feeder for the main product as well as 4 insert stations and is equipped with an MM compensating stacker "310".

Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Muller Martini 3641, Transfer Element To Binder Muller Martini 3643. Perfect Binder: Muller Martini 3016-18 (1998) M-Mo. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmers: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 cycles/hour, Format: min. 100x140mm, Max. 420x305mm, Book thickness: min. 3mm, Max. 60mm, Cover width (open): min. 203mm, max. 642mm.

4-color format: Max. 1000 x 2400 mm.<br>KICKER-FEEDER, DOUBLE STANZE, SLOTTER, STAPLER ETC.. <br><br>Still in operation: No<br>Verf Gbar: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

book-sewing machine