used MARKIERPRESS Punching Presses

Pneumatic marking press stroke length: 150 mm Maximum pressure capacity: 8 bar Movement stage: 420 x 750 mm Between posts: 650 mm Connection: Pneumatic Dimensions Lxwxh: 85 x 100 x 170 cm Machine weight: 300 kg

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Punching machine make WEINGARTEN type XKSHw 30Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 600/64, year of construction 1964Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 764/59, built in 1959Press force: 30 tSheet thickness: 1.25 mmStrokes: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 50 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front a.d. Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350*100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loadin ...

AIDA A-SF-7000S (40 ton) press year `2005 for sale. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface

Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

We can offer you all types of Wafios nail machines from S25 - N90